ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-5712ACDL1-M3T1U
자세히보기 데이터시트

S-5712ACDL1-M3T1U

Product Overview

Category

The S-5712ACDL1-M3T1U belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Low Dropout Voltage: 160mV @ 300mA
  • High Ripple Rejection: 75dB @ 1kHz
  • Current Limit Circuit
  • Thermal Shutdown Circuit
  • Short Circuit Protection Circuit

Package

The S-5712ACDL1-M3T1U comes in a small, surface-mount package for easy integration into circuit boards.

Essence

This voltage regulator is essential for maintaining stable power supply to sensitive electronic components.

Packaging/Quantity

It is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 160mV @ 300mA
  • Ripple Rejection: 75dB @ 1kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The S-5712ACDL1-M3T1U has a standard 5-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. EN (Enable)

Functional Features

  • Wide Input Voltage Range
  • Low Dropout Voltage
  • High Ripple Rejection
  • Current Limit Circuit
  • Thermal Shutdown Circuit
  • Short Circuit Protection Circuit

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power loss
  • High ripple rejection ensures clean output voltage
  • Integrated protection circuits enhance reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Requires careful thermal management at higher ambient temperatures

Working Principles

The S-5712ACDL1-M3T1U operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite variations in the input voltage and load conditions. The integrated protection circuits monitor and safeguard the regulator from overcurrent, overheating, and short circuits.

Detailed Application Field Plans

The S-5712ACDL1-M3T1U is well-suited for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Consumer electronics

Detailed and Complete Alternative Models

  • S-5712BCDL1-M3T1U
  • S-5712CCDL1-M3T1U
  • S-5712DADL1-M3T1U
  • S-5712EEDL1-M3T1U

In conclusion, the S-5712ACDL1-M3T1U voltage regulator offers a reliable solution for stabilizing voltage in a wide range of electronic applications, despite its limitations in maximum output current. Its integrated protection features and compact package make it a valuable component for modern electronic designs.

Word Count: 511

기술 솔루션에 S-5712ACDL1-M3T1U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of S-5712ACDL1-M3T1U in technical solutions:

  1. What is the S-5712ACDL1-M3T1U?

    • The S-5712ACDL1-M3T1U is a voltage regulator module designed for use in various technical solutions.

  2. What is the input voltage range for S-5712ACDL1-M3T1U?

    • The input voltage range for S-5712ACDL1-M3T1U is typically between 4.5V to 18V.

  3. What is the output voltage of S-5712ACDL1-M3T1U?

    • The output voltage of S-5712ACDL1-M3T1U is fixed at 3.3V.

  4. What is the maximum output current of S-5712ACDL1-M3T1U?

    • The maximum output current of S-5712ACDL1-M3T1U is typically 1A.

  5. What are the typical applications of S-5712ACDL1-M3T1U?

    • S-5712ACDL1-M3T1U is commonly used in applications such as IoT devices, industrial equipment, and consumer electronics.

  6. Is S-5712ACDL1-M3T1U suitable for battery-powered applications?

    • Yes, S-5712ACDL1-M3T1U is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

  7. Does S-5712ACDL1-M3T1U have built-in protection features?

    • Yes, S-5712ACDL1-M3T1U includes overcurrent protection, thermal shutdown, and reverse polarity protection.

  8. Can S-5712ACDL1-M3T1U be used in automotive applications?

    • Yes, S-5712ACDL1-M3T1U is suitable for automotive applications due to its wide operating temperature range and robust design.

  9. What are the key advantages of using S-5712ACDL1-M3T1U in technical solutions?

    • Some key advantages include its small form factor, high efficiency, and reliable performance.

  10. Are there any specific layout considerations when using S-5712ACDL1-M3T1U?

    • It is recommended to follow the manufacturer's guidelines for PCB layout and thermal management to ensure optimal performance.

I hope these questions and answers provide helpful information about the application of S-5712ACDL1-M3T1U in technical solutions. Let me know if you need further assistance!