S-80821CLPF-B6GTFG belongs to the category of electronic components.
This product is commonly used in various electronic devices and circuits for voltage detection and reset functions.
The S-80821CLPF-B6GTFG is packaged in a compact SOT-23-5 package, which ensures easy integration into electronic circuits.
The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reliable reset function for electronic devices.
The S-80821CLPF-B6GTFG is typically available in reels containing 3,000 units per reel.
The S-80821CLPF-B6GTFG has the following pin configuration:
```
| | --| VDD|-- Pin 1: Supply Voltage --| GND|-- Pin 2: Ground --| OUT|-- Pin 3: Output --| EN |-- Pin 4: Enable |____| ```
The S-80821CLPF-B6GTFG operates based on a voltage divider network and a comparator. When the input voltage exceeds the reference voltage set internally, the output goes low, indicating a voltage detection event. The built-in delay circuit ensures a stable output signal by introducing a delay of 100ms before the output changes state.
The S-80821CLPF-B6GTFG finds applications in various electronic devices and circuits that require voltage monitoring and reset functionality. Some potential application fields include:
These alternative models offer similar features and characteristics, allowing users to select the most suitable option based on their specific voltage detection requirements.
(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of S-80821CLPF-B6GTFG in technical solutions:
1. What is the S-80821CLPF-B6GTFG? - The S-80821CLPF-B6GTFG is a voltage detector IC (integrated circuit) manufactured by a specific company.
2. What is the purpose of the S-80821CLPF-B6GTFG? - The purpose of this IC is to monitor and detect voltage levels in electronic circuits.
3. What voltage range does the S-80821CLPF-B6GTFG support? - The S-80821CLPF-B6GTFG supports a voltage range of X volts to Y volts (specify the actual range).
4. How does the S-80821CLPF-B6GTFG work? - This IC works by comparing the input voltage with a reference voltage and providing an output signal when the input voltage crosses a certain threshold.
5. What are the typical applications of the S-80821CLPF-B6GTFG? - Some typical applications include battery-powered devices, power management systems, and voltage monitoring in various electronic circuits.
6. Can the S-80821CLPF-B6GTFG be used in automotive applications? - Yes, the S-80821CLPF-B6GTFG is suitable for automotive applications as it meets the required specifications and standards.
7. Does the S-80821CLPF-B6GTFG have any built-in protection features? - Yes, this IC has built-in overvoltage protection, which helps safeguard the connected circuitry from excessive voltage levels.
8. What is the operating temperature range of the S-80821CLPF-B6GTFG? - The S-80821CLPF-B6GTFG has an operating temperature range of X degrees Celsius to Y degrees Celsius (specify the actual range).
9. Can the S-80821CLPF-B6GTFG be used in low-power applications? - Yes, this IC is designed for low-power consumption, making it suitable for use in energy-efficient devices.
10. Is the S-80821CLPF-B6GTFG available in different package options? - Yes, this IC is available in various package options such as SOP-4, SOT-23-5, etc., allowing flexibility in design and integration.
Please note that the answers provided above are generic and may vary depending on the specific datasheet and manufacturer's specifications of the S-80821CLPF-B6GTFG.