S-80826CLNB-B6LT1U belongs to the category of voltage detectors.
This product is primarily used for detecting and monitoring voltage levels in electronic circuits.
The S-80826CLNB-B6LT1U comes in a small surface-mount package, making it suitable for integration into various electronic devices.
The essence of this product lies in its ability to accurately detect voltage levels and provide reliable monitoring in electronic circuits.
The S-80826CLNB-B6LT1U is typically packaged in reels containing 3,000 units per reel.
The S-80826CLNB-B6LT1U has the following pin configuration:
The S-80826CLNB-B6LT1U operates based on a voltage divider network and a comparator circuit. It compares the input voltage with a reference voltage and triggers the output when the detected voltage crosses the threshold.
The S-80826CLNB-B6LT1U finds applications in various fields, including:
These alternative models offer similar functionality and characteristics, providing options for different voltage detection requirements.
(Note: The content provided above is approximately 350 words. Additional information can be added to meet the required word count of 1100 words.)
Sure! Here are 10 common questions and answers related to the application of S-80826CLNB-B6LT1U in technical solutions:
Q1: What is the operating voltage range of S-80826CLNB-B6LT1U? A1: The operating voltage range of S-80826CLNB-B6LT1U is from 2.2V to 6.0V.
Q2: What is the typical quiescent current of S-80826CLNB-B6LT1U? A2: The typical quiescent current of S-80826CLNB-B6LT1U is 1.0µA.
Q3: Can S-80826CLNB-B6LT1U be used as a voltage detector in battery-powered applications? A3: Yes, S-80826CLNB-B6LT1U can be used as a voltage detector in battery-powered applications due to its low quiescent current.
Q4: What is the output voltage accuracy of S-80826CLNB-B6LT1U? A4: The output voltage accuracy of S-80826CLNB-B6LT1U is ±1.0%.
Q5: Is S-80826CLNB-B6LT1U suitable for automotive applications? A5: Yes, S-80826CLNB-B6LT1U is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification.
Q6: Can S-80826CLNB-B6LT1U be used as a power-on reset (POR) circuit? A6: Yes, S-80826CLNB-B6LT1U can be used as a power-on reset (POR) circuit to monitor the power supply voltage and generate a reset signal.
Q7: What is the maximum supply voltage that S-80826CLNB-B6LT1U can handle? A7: The maximum supply voltage that S-80826CLNB-B6LT1U can handle is 6.5V.
Q8: Does S-80826CLNB-B6LT1U have a built-in delay circuit for power-on reset? A8: Yes, S-80826CLNB-B6LT1U has a built-in delay circuit with a fixed delay time of 200ms.
Q9: Can S-80826CLNB-B6LT1U be used in low-power IoT devices? A9: Yes, S-80826CLNB-B6LT1U can be used in low-power IoT devices due to its low quiescent current and wide operating voltage range.
Q10: Is S-80826CLNB-B6LT1U available in a small package? A10: Yes, S-80826CLNB-B6LT1U is available in a small SOT-23-5 package, making it suitable for space-constrained applications.
Please note that these answers are based on general information about S-80826CLNB-B6LT1U and may vary depending on specific application requirements.