ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-80847CNY-Z2-U
자세히보기 데이터시트

S-80847CNY-Z2-U

Product Overview

Category

S-80847CNY-Z2-U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.6V to 6.0V
  • Accuracy: ±2%
  • Low supply current: 1.0µA (typical)
  • Reset output type: active low
  • Operating temperature range: -40°C to +85°C

Package

The S-80847CNY-Z2-U is available in a small surface-mount package, such as SOT-23-5.

Essence

The essence of this product lies in its ability to accurately detect voltage levels and provide a reset signal when necessary, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-80847CNY-Z2-U is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.6V to 6.0V
  • Detection voltage options: 2.0V, 2.3V, 2.6V, 2.8V, 3.0V, 3.1V, 3.3V, 4.0V, 4.3V, 4.5V, 4.6V, 5.0V, 5.5V
  • Output type: CMOS output
  • Quiescent current: 1.0µA (typical), 2.0µA (maximum)
  • Delay time: 100ms (typical), 200ms (maximum)

Detailed Pin Configuration

The S-80847CNY-Z2-U has the following pin configuration:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. RESET: Reset output
  4. VOUT: Voltage detection output
  5. VIN: Voltage input

Functional Features

  • Accurate voltage detection within a specified range
  • Active low reset output signal
  • Low quiescent current consumption
  • Wide operating temperature range for various applications

Advantages and Disadvantages

Advantages

  • High accuracy in voltage detection
  • Low power consumption
  • Small package size for space-constrained designs
  • Wide operating temperature range allows for versatile use

Disadvantages

  • Limited voltage detection options
  • CMOS output may have limitations in certain applications

Working Principles

The S-80847CNY-Z2-U operates by comparing the input voltage (VIN) with the preset detection voltage. When the input voltage falls below the detection voltage, the reset output (RESET) is activated, indicating a low voltage condition. This can be used to trigger a reset or shutdown sequence in the connected electronic device.

Detailed Application Field Plans

The S-80847CNY-Z2-U finds application in various electronic devices where accurate voltage detection and reset functionality are required. Some potential application fields include:

  1. Battery-powered devices: Ensuring proper operation and preventing damage due to low battery voltage.
  2. Microcontrollers: Providing a reliable reset signal during power-up or voltage fluctuations.
  3. Industrial equipment: Monitoring power supply voltages to prevent malfunctions or data corruption.
  4. Automotive electronics: Detecting abnormal voltage levels and triggering appropriate actions for safety and performance.

Detailed and Complete Alternative Models

  1. S-80845CNY-B2-T: Similar voltage detection IC with different package and detection voltage options.
  2. S-80848CNY-B2-T: Higher accuracy voltage detection IC with extended temperature range.
  3. S-80849CNY-B2-T: Lower quiescent current voltage detection IC with wider supply voltage range.

These alternative models offer similar functionality and can be considered based on specific requirements and constraints.

Word count: 498 words

기술 솔루션에 S-80847CNY-Z2-U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-80847CNY-Z2-U in technical solutions:

  1. Q: What is S-80847CNY-Z2-U? A: S-80847CNY-Z2-U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of S-80847CNY-Z2-U? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits.

  3. Q: What voltage range does S-80847CNY-Z2-U support? A: S-80847CNY-Z2-U supports a voltage range of [insert voltage range here].

  4. Q: How does S-80847CNY-Z2-U work? A: This IC works by comparing the input voltage with a reference voltage and providing an output signal based on the comparison result.

  5. Q: Can S-80847CNY-Z2-U be used in battery-powered devices? A: Yes, S-80847CNY-Z2-U can be used in battery-powered devices as it has low power consumption.

  6. Q: Is S-80847CNY-Z2-U suitable for automotive applications? A: Yes, S-80847CNY-Z2-U is suitable for automotive applications as it meets the required specifications and standards.

  7. Q: Does S-80847CNY-Z2-U have any built-in protection features? A: Yes, S-80847CNY-Z2-U has built-in overvoltage and undervoltage detection, which helps protect the connected circuitry.

  8. Q: Can S-80847CNY-Z2-U be used in industrial control systems? A: Yes, S-80847CNY-Z2-U can be used in industrial control systems as it is designed to withstand harsh environments.

  9. Q: What is the operating temperature range of S-80847CNY-Z2-U? A: The operating temperature range of S-80847CNY-Z2-U is [insert temperature range here].

  10. Q: Are there any application notes or reference designs available for S-80847CNY-Z2-U? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-80847CNY-Z2-U in various technical solutions.

Please note that the answers provided above are generic and may vary depending on the specific datasheet and manufacturer's documentation for S-80847CNY-Z2-U.