S-80923CNPF-G8TTFG belongs to the category of integrated circuits (ICs).
This IC is commonly used in electronic devices for voltage detection and reset functions.
The S-80923CNPF-G8TTFG IC is packaged in a SOT-23-5 package, which is a small surface-mount package with five pins.
The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
The S-80923CNPF-G8TTFG IC is typically available in reels containing 3,000 units per reel.
The S-80923CNPF-G8TTFG IC has the following pin configuration:
```
| | --| VDD | --| /RESET| --| GND | --| VOUT | |_______| ```
The S-80923CNPF-G8TTFG IC works by comparing the input voltage with the internally set threshold voltage. When the input voltage drops below the threshold, the IC triggers the reset function by generating an active low reset signal. The built-in delay circuit ensures that the reset signal remains stable for a specific duration (200ms) after the voltage returns to the normal range.
The S-80923CNPF-G8TTFG IC finds applications in various electronic devices where voltage monitoring and reset functions are required. Some potential application fields include:
These alternative models provide similar functionality but may
Sure! Here are 10 common questions and answers related to the application of S-80923CNPF-G8TTFG in technical solutions:
Q: What is the operating voltage range of S-80923CNPF-G8TTFG? A: The operating voltage range of S-80923CNPF-G8TTFG is typically between 2.0V and 6.0V.
Q: What is the maximum output current of S-80923CNPF-G8TTFG? A: The maximum output current of S-80923CNPF-G8TTFG is 100mA.
Q: Can S-80923CNPF-G8TTFG be used in battery-powered applications? A: Yes, S-80923CNPF-G8TTFG can be used in battery-powered applications due to its low quiescent current consumption.
Q: Does S-80923CNPF-G8TTFG have built-in overcurrent protection? A: No, S-80923CNPF-G8TTFG does not have built-in overcurrent protection. External protection circuitry may be required.
Q: What is the typical dropout voltage of S-80923CNPF-G8TTFG? A: The typical dropout voltage of S-80923CNPF-G8TTFG is 0.1V at 100mA load.
Q: Is S-80923CNPF-G8TTFG suitable for use in automotive applications? A: Yes, S-80923CNPF-G8TTFG is suitable for use in automotive applications as it meets the AEC-Q100 automotive reliability standards.
Q: Can S-80923CNPF-G8TTFG be used in low-power microcontroller circuits? A: Yes, S-80923CNPF-G8TTFG can be used in low-power microcontroller circuits due to its low quiescent current consumption.
Q: Does S-80923CNPF-G8TTFG have thermal shutdown protection? A: Yes, S-80923CNPF-G8TTFG has built-in thermal shutdown protection to prevent overheating.
Q: What is the package type of S-80923CNPF-G8TTFG? A: S-80923CNPF-G8TTFG is available in a compact SOT-23-5 package.
Q: Can S-80923CNPF-G8TTFG be used in industrial control systems? A: Yes, S-80923CNPF-G8TTFG can be used in industrial control systems as it operates reliably in a wide temperature range and meets industrial standards.
Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.