ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-80942CLMC-G7CT2U
자세히보기 데이터시트

S-80942CLMC-G7CT2U

Product Overview

Category

S-80942CLMC-G7CT2U belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.0V to 6.0V
  • Accuracy: ±1.0%
  • Low supply current: 1.0μA (typ.)
  • Reset output type: CMOS output
  • Package type: SOT-23-5
  • Operating temperature range: -40°C to +85°C

Package and Quantity

The S-80942CLMC-G7CT2U is available in a SOT-23-5 package. It is typically sold in reels containing 3000 units.

Specifications

  • Supply voltage range: 1.0V to 6.0V
  • Detection voltage options: 1.0V, 1.1V, 1.2V, ..., 5.9V, 6.0V
  • Quiescent current: 1.0μA (typ.), 3.0μA (max)
  • Output voltage: VDD - 0.1V (typ.)
  • Output current: 10mA (max)

Pin Configuration

The S-80942CLMC-G7CT2U has the following pin configuration:

```

| | --|----|-- |____| ```

Pin 1: GND (Ground) Pin 2: VDD (Supply Voltage) Pin 3: MR (Manual Reset) Pin 4: RESET (Reset Output) Pin 5: VOUT (Voltage Detection Output)

Functional Features

  1. Voltage Detection: The S-80942CLMC-G7CT2U can accurately detect the voltage level within the specified range.
  2. Reset Function: It provides a reset output signal when the detected voltage falls below the set threshold.
  3. Manual Reset: The MR pin allows for manual reset control.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • High accuracy
  • Low supply current consumption
  • Compact package size
  • Manual reset capability

Disadvantages

  • Limited output current capacity (10mA max)
  • Requires external components for proper operation

Working Principles

The S-80942CLMC-G7CT2U operates by comparing the input voltage with an internal reference voltage. When the input voltage falls below the set threshold, the reset output is activated. The manual reset pin allows for additional control over the reset function.

Application Field Plans

The S-80942CLMC-G7CT2U finds applications in various electronic devices where voltage monitoring and reset functions are required. Some potential application fields include:

  1. Microcontrollers: Ensuring reliable system reset during power fluctuations.
  2. Battery-Powered Devices: Preventing damage due to undervoltage conditions.
  3. Industrial Control Systems: Monitoring critical voltage levels for safe operation.
  4. Automotive Electronics: Providing reset functionality for vehicle control units.

Alternative Models

  1. S-80942CNMC-G7CT2U: Similar specifications but with an open-drain output.
  2. S-80942CLNB-G7CT2U: Lower quiescent current of 0.5μA (typ.).
  3. S-80942CLMC-G8CT2U: Extended operating temperature range (-40°C to +105°C).

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 536 words

기술 솔루션에 S-80942CLMC-G7CT2U 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-80942CLMC-G7CT2U in technical solutions:

  1. Q: What is the S-80942CLMC-G7CT2U? A: The S-80942CLMC-G7CT2U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-80942CLMC-G7CT2U? A: The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage exceeds or falls below a certain threshold.

  3. Q: What are the typical applications of the S-80942CLMC-G7CT2U? A: This IC is commonly used in various technical solutions such as battery-powered devices, power management systems, industrial equipment, and automotive electronics.

  4. Q: How does the S-80942CLMC-G7CT2U work? A: The IC compares the input voltage with a reference voltage internally set within the device. When the input voltage crosses the threshold, it triggers the output signal accordingly.

  5. Q: What is the voltage range that the S-80942CLMC-G7CT2U can detect? A: The S-80942CLMC-G7CT2U can detect voltages ranging from a minimum of X volts to a maximum of Y volts.

  6. Q: Can the S-80942CLMC-G7CT2U be used in both AC and DC applications? A: No, this IC is specifically designed for DC voltage detection and is not suitable for AC applications.

  7. Q: Does the S-80942CLMC-G7CT2U have any built-in protection features? A: Yes, this IC includes built-in protection features such as overvoltage protection and reverse voltage protection.

  8. Q: What is the output format of the S-80942CLMC-G7CT2U? A: The output format can vary depending on the specific model, but commonly it provides an open-drain or push-pull output.

  9. Q: Can the S-80942CLMC-G7CT2U be used in high-temperature environments? A: Yes, this IC is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  10. Q: Are there any recommended external components that need to be connected with the S-80942CLMC-G7CT2U? A: Yes, some typical external components include capacitors for stability and resistors for setting the detection threshold.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of the S-80942CLMC-G7CT2U.