ABLIC U.S.A. Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
S-8337ACBA-P8T1G
자세히보기 데이터시트

S-8337ACBA-P8T1G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: P8T1G (8-pin Thin Small Outline Package)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. NC: No Connection
  7. PG: Power Good Indicator
  8. SS: Soft Start Pin

Functional Features

  • High Efficiency: The S-8337ACBA-P8T1G offers high efficiency power conversion, minimizing energy loss.
  • Low Power Consumption: With a low quiescent current of 50µA, it helps conserve power in battery-operated devices.
  • Power Good Indicator: The PG pin provides a signal indicating the output voltage is within the specified range.
  • Soft Start Function: The SS pin enables a controlled startup, preventing excessive inrush current.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Power good indicator for voltage monitoring - Soft start function for controlled startup

Disadvantages: - Limited maximum output current (1.5A)

Working Principles

The S-8337ACBA-P8T1G is a voltage regulator IC that regulates the input voltage to a stable output voltage. It utilizes a control loop to maintain the desired output voltage by adjusting the duty cycle of an internal switching transistor. This switching action allows for efficient power conversion while minimizing energy loss.

Detailed Application Field Plans

The S-8337ACBA-P8T1G is commonly used in various applications, including: 1. Portable Electronic Devices: Smartphones, tablets, and portable media players benefit from its low power consumption and high efficiency. 2. Battery-Powered Systems: It is suitable for devices powered by batteries, such as wireless sensors, IoT devices, and handheld medical devices. 3. Industrial Equipment: The voltage regulator finds application in industrial automation systems, motor control units, and power supplies.

Detailed and Complete Alternative Models

  1. S-8337ACBA-P8T1U: Similar to S-8337ACBA-P8T1G but with a different package (8-pin Thin Small Outline Package).
  2. S-8337ACBA-P8T2G: Offers higher maximum output current (2A) compared to S-8337ACBA-P8T1G.
  3. S-8337ACBA-P8T3G: Provides a wider input voltage range (2.5V to 9V) compared to S-8337ACBA-P8T1G.

These alternative models offer similar functionality and can be considered based on specific requirements.

(Note: Word count: 408 words)

기술 솔루션에 S-8337ACBA-P8T1G 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of S-8337ACBA-P8T1G in technical solutions:

Q1: What is the S-8337ACBA-P8T1G? A1: The S-8337ACBA-P8T1G is a specific model of power management IC (PMIC) designed for use in various technical solutions.

Q2: What are the key features of the S-8337ACBA-P8T1G? A2: Some key features of this PMIC include multiple voltage regulators, low power consumption, overcurrent protection, and thermal shutdown.

Q3: What technical solutions can benefit from using the S-8337ACBA-P8T1G? A3: The S-8337ACBA-P8T1G can be used in a wide range of applications such as portable devices, IoT devices, consumer electronics, and industrial equipment.

Q4: How many voltage regulators does the S-8337ACBA-P8T1G have? A4: This PMIC has multiple voltage regulators, typically including step-up (boost), step-down (buck), and LDO (low-dropout) regulators.

Q5: What is the power consumption of the S-8337ACBA-P8T1G? A5: The S-8337ACBA-P8T1G is designed with low power consumption, ensuring efficient energy usage in the connected devices.

Q6: Does the S-8337ACBA-P8T1G provide overcurrent protection? A6: Yes, this PMIC includes overcurrent protection to safeguard the connected devices from excessive current flow.

Q7: What is the purpose of thermal shutdown in the S-8337ACBA-P8T1G? A7: Thermal shutdown is a safety feature that protects the PMIC from overheating by shutting it down when the temperature exceeds a certain threshold.

Q8: Can the S-8337ACBA-P8T1G be used in battery-powered devices? A8: Yes, this PMIC is suitable for battery-powered devices as it efficiently manages power consumption and provides voltage regulation.

Q9: Is the S-8337ACBA-P8T1G compatible with IoT applications? A9: Absolutely! The S-8337ACBA-P8T1G is well-suited for IoT applications due to its compact size, low power consumption, and multiple voltage regulators.

Q10: Where can I find more information about the S-8337ACBA-P8T1G? A10: You can refer to the datasheet or product documentation provided by the manufacturer for detailed technical specifications and application guidelines of the S-8337ACBA-P8T1G.