Allegro MicroSystems, LLC
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ACS715ELCTR-30A-T
자세히보기 데이터시트

ACS715ELCTR-30A-T

Introduction

The ACS715ELCTR-30A-T is a current sensor belonging to the category of electrical components. It is commonly used to measure AC or DC currents in various electronic circuits and systems. This sensor possesses unique characteristics and packaging, making it suitable for a wide range of applications.

Basic Information Overview

  • Category: Electrical Components
  • Use: Measuring AC or DC currents
  • Characteristics: High accuracy, low noise, compact size
  • Package: Surface mount
  • Essence: Accurate current measurement in electronic systems
  • Packaging/Quantity: Tape and reel packaging, quantity varies by supplier

Specifications

  • Operating Voltage: 5V to 5.5V
  • Current Sensing Range: ±30A
  • Output Voltage: 2.5V (no current flow), VCC (max current flow)
  • Bandwidth: 80kHz
  • Isolation Voltage: 2.1kV RMS

Detailed Pin Configuration

The ACS715ELCTR-30A-T features a 5-pin configuration: 1. VCC - Power supply input 2. OUT - Output voltage proportional to the sensed current 3. GND - Ground connection 4. NC - No connection 5. NC - No connection

Functional Features

  • High accuracy current sensing
  • Low-noise output signal
  • Wide operating voltage range
  • Small form factor for easy integration

Advantages and Disadvantages

Advantages: - Accurate current measurement - Compact size - Suitable for both AC and DC currents

Disadvantages: - Limited to a maximum current of ±30A - Requires careful handling due to sensitivity

Working Principles

The ACS715ELCTR-30A-T utilizes the Hall effect to measure current. When a current flows through the sensor, it generates a magnetic field which is sensed by the Hall-effect sensor inside the device. This results in a proportional output voltage that can be measured to determine the current flow.

Detailed Application Field Plans

This sensor finds applications in various fields including: - Power supplies - Motor control systems - Battery management - Overcurrent protection circuits

Detailed and Complete Alternative Models

  • ACS712: Similar current sensor with different current sensing ranges
  • INA219: Current sensor with integrated shunt resistor for precise current measurement
  • LTC6101: High-side current sense amplifier for accurate current measurements

In conclusion, the ACS715ELCTR-30A-T current sensor offers high accuracy and reliability in measuring AC and DC currents, making it an essential component in a wide range of electronic systems.

Word Count: 410

기술 솔루션에 ACS715ELCTR-30A-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the ACS715ELCTR-30A-T?

    • The ACS715ELCTR-30A-T is a high-precision, fully integrated Hall-effect-based linear current sensor with 30A current sensing capability.

  2. How does the ACS715ELCTR-30A-T work?

    • The ACS715ELCTR-30A-T operates on the principle of Hall-effect sensing, where it measures the magnetic field generated by the current flowing through the conductor to determine the current value.

  3. What are the typical applications of the ACS715ELCTR-30A-T?

    • The ACS715ELCTR-30A-T is commonly used in applications such as motor control, power management, and overcurrent protection in various electronic systems.

  4. What is the output signal of the ACS715ELCTR-30A-T?

    • The ACS715ELCTR-30A-T provides an analog voltage output proportional to the sensed current, making it compatible with most microcontrollers and ADCs.

  5. How accurate is the ACS715ELCTR-30A-T?

    • The ACS715ELCTR-30A-T offers high accuracy with low offset and gain errors, making it suitable for precise current measurements in technical solutions.

  6. What is the operating voltage range of the ACS715ELCTR-30A-T?

    • The ACS715ELCTR-30A-T typically operates within a voltage range of 4.5V to 5.5V, making it compatible with standard power supply configurations.

  7. Can the ACS715ELCTR-30A-T measure both AC and DC currents?

    • Yes, the ACS715ELCTR-30A-T can accurately measure both AC and DC currents, providing versatility in various technical solutions.

  8. Is the ACS715ELCTR-30A-T immune to external magnetic fields?

    • The ACS715ELCTR-30A-T is designed to be immune to moderate external magnetic fields, ensuring reliable and accurate operation in real-world environments.

  9. Does the ACS715ELCTR-30A-T require external calibration?

    • The ACS715ELCTR-30A-T is factory-calibrated, eliminating the need for additional user calibration and simplifying its integration into technical solutions.

  10. What are the key advantages of using the ACS715ELCTR-30A-T in technical solutions?

    • The ACS715ELCTR-30A-T offers non-intrusive current sensing, high accuracy, compact size, and ease of integration, making it an ideal choice for a wide range of technical applications.