QD Devices Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ADN4662BRZ-REEL7
자세히보기 데이터시트

ADN4662BRZ-REEL7

Product Overview

Category

The ADN4662BRZ-REEL7 belongs to the category of integrated circuits (ICs) and specifically falls under the family of RS-485/RS-422 transceivers.

Use

This product is commonly used for bidirectional communication in noisy industrial environments, providing robust data transmission over long cable lengths.

Characteristics

  • High-speed data transmission
  • Robustness against electromagnetic interference
  • Low power consumption
  • Wide operating temperature range

Package

The ADN4662BRZ-REEL7 is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of this product lies in its ability to facilitate reliable and high-speed data communication in industrial settings.

Packaging/Quantity

The ADN4662BRZ-REEL7 is typically packaged in reels containing a specific quantity of units, as specified by the manufacturer.

Specifications

  • Data Rate: Up to 20 Mbps
  • Operating Voltage Range: 3V to 5.5V
  • Operating Temperature Range: -40°C to 125°C
  • Number of Pins: 8
  • Compliance with ESD Standards: ±15 kV HBM on driver outputs and receiver inputs

Detailed Pin Configuration

  1. AIN-
  2. AIN+
  3. GND
  4. BOUT-
  5. BOUT+
  6. GND
  7. VCC
  8. RE

Functional Features

  • Differential signaling for noise immunity
  • Receiver fail-safe feature
  • Short-circuit and thermal shutdown protection
  • Low quiescent current

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Robustness in noisy environments
  • Wide operating temperature range

Disadvantages

  • Limited maximum data rate compared to some newer transceiver models
  • Relatively higher power consumption compared to low-power alternatives

Working Principles

The ADN4662BRZ-REEL7 operates based on the differential signaling principle, where it transmits and receives data using complementary signal pairs to minimize the impact of common-mode noise and interference. The receiver fail-safe feature ensures that the receiver output remains in a known state when the inputs are open or shorted.

Detailed Application Field Plans

This transceiver is well-suited for various industrial applications, including: - Factory automation systems - Process control equipment - Building automation systems - Industrial networking infrastructure

Detailed and Complete Alternative Models

Some alternative models to consider include: - MAX485 - SN65HVD72 - LTC2850

In conclusion, the ADN4662BRZ-REEL7 offers reliable and high-speed data transmission in industrial environments, making it an essential component in modern industrial communication systems.

[Word Count: 411]

기술 솔루션에 ADN4662BRZ-REEL7 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the ADN4662BRZ-REEL7?

    • The ADN4662BRZ-REEL7 is a high-speed, low-power, differential line driver and receiver designed for applications requiring high data rates and low power consumption.

  2. What is the typical operating voltage range for the ADN4662BRZ-REEL7?

    • The typical operating voltage range for the ADN4662BRZ-REEL7 is 3.0V to 3.6V.

  3. What are the typical applications for the ADN4662BRZ-REEL7?

    • Typical applications for the ADN4662BRZ-REEL7 include high-speed communication interfaces, such as USB, HDMI, DisplayPort, and other similar protocols.

  4. What is the maximum data rate supported by the ADN4662BRZ-REEL7?

    • The ADN4662BRZ-REEL7 supports a maximum data rate of 4.25Gbps.

  5. What is the power consumption of the ADN4662BRZ-REEL7?

    • The power consumption of the ADN4662BRZ-REEL7 is typically very low, making it suitable for power-sensitive applications.

  6. Does the ADN4662BRZ-REEL7 support hot-plugging?

    • Yes, the ADN4662BRZ-REEL7 supports hot-plugging, allowing for easy integration into systems without disrupting operation.

  7. What is the temperature range for the ADN4662BRZ-REEL7?

    • The ADN4662BRZ-REEL7 operates within a wide temperature range, typically from -40°C to 125°C, making it suitable for various environmental conditions.

  8. Is the ADN4662BRZ-REEL7 RoHS compliant?

    • Yes, the ADN4662BRZ-REEL7 is RoHS compliant, ensuring environmental friendliness and regulatory compliance.

  9. What is the package type of the ADN4662BRZ-REEL7?

    • The ADN4662BRZ-REEL7 comes in a small form factor package, typically a 16-lead LFCSP (QFN) package.

  10. Are there any evaluation boards or reference designs available for the ADN4662BRZ-REEL7?

    • Yes, evaluation boards and reference designs are available to help customers quickly prototype and integrate the ADN4662BRZ-REEL7 into their technical solutions.