ADP1649ACBZ-R7 belongs to the category of integrated circuits (ICs).
It is commonly used as a voltage regulator in various electronic devices.
ADP1649ACBZ-R7 is available in a SOT-23-6 package. It is typically sold in reels containing a certain quantity, usually specified by the manufacturer or supplier.
The specifications for ADP1649ACBZ-R7 are as follows:
ADP1649ACBZ-R7 has a total of six pins arranged as follows:
```
| | | 1 2 | | | | 3 4 | | | | 5 6 | |___________| ```
Pin Description: 1. VIN: Input Voltage 2. GND: Ground 3. EN: Enable Pin 4. FB: Feedback Pin 5. SW: Switch Node 6. VOUT: Output Voltage
ADP1649ACBZ-R7 is a voltage regulator that converts an input voltage within the specified range to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The enable pin (EN) controls the operation of the device, while the feedback pin (FB) provides feedback to maintain the desired output voltage. The switch node (SW) handles the switching of the internal MOSFETs, and the output voltage (VOUT) is delivered to the load.
ADP1649ACBZ-R7 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered systems
Here are some alternative models that can be considered as alternatives to ADP1649ACBZ-R7: - ADP1650ACBZ-R7 - ADP1648ACBZ-R7 - ADP1651ACBZ-R7 - ADP1647ACBZ-R7
These models offer similar functionality and can be used as replacements depending on specific requirements.
In conclusion, ADP1649ACBZ-R7 is an integrated circuit voltage regulator with a wide input voltage range, high efficiency, and various protection features. It finds applications in numerous electronic devices and has alternative models available for different design needs.
Sure! Here are 10 common questions and answers related to the application of ADP1649ACBZ-R7 in technical solutions:
Q: What is ADP1649ACBZ-R7? A: ADP1649ACBZ-R7 is a high-efficiency, low quiescent current, synchronous step-down DC-DC converter.
Q: What is the input voltage range of ADP1649ACBZ-R7? A: The input voltage range of ADP1649ACBZ-R7 is typically between 2.3V and 5.5V.
Q: What is the output voltage range of ADP1649ACBZ-R7? A: The output voltage range of ADP1649ACBZ-R7 can be adjusted from 0.6V to VIN.
Q: What is the maximum output current of ADP1649ACBZ-R7? A: ADP1649ACBZ-R7 can deliver a maximum output current of up to 1.2A.
Q: Does ADP1649ACBZ-R7 have built-in protection features? A: Yes, ADP1649ACBZ-R7 includes overcurrent protection, thermal shutdown, and undervoltage lockout for enhanced system reliability.
Q: Can ADP1649ACBZ-R7 operate in a wide temperature range? A: Yes, ADP1649ACBZ-R7 is designed to operate reliably in a temperature range of -40°C to +125°C.
Q: Is ADP1649ACBZ-R7 suitable for battery-powered applications? A: Yes, ADP1649ACBZ-R7's low quiescent current and high efficiency make it ideal for battery-powered applications, extending battery life.
Q: Can ADP1649ACBZ-R7 be used in portable devices? A: Absolutely! ADP1649ACBZ-R7's small package size and low profile make it suitable for space-constrained portable devices.
Q: Does ADP1649ACBZ-R7 support adjustable switching frequency? A: Yes, ADP1649ACBZ-R7 allows the user to adjust the switching frequency between 500kHz and 2MHz.
Q: What are some typical applications of ADP1649ACBZ-R7? A: ADP1649ACBZ-R7 is commonly used in smartphones, tablets, wearable devices, digital cameras, and other portable electronics requiring efficient power conversion.
Please note that these answers are general and may vary depending on specific design requirements and application scenarios.