QD Devices Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
OP97FSZ
자세히보기 데이터시트

OP97FSZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: High precision, low offset voltage, low noise
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The OP97FSZ is a high-performance operational amplifier designed for precision applications.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Supply Voltage: ±2.5V to ±18V
  • Input Offset Voltage: 25µV maximum
  • Input Bias Current: 1nA maximum
  • Input Noise Voltage: 0.6µV RMS
  • Gain Bandwidth Product: 4MHz
  • Slew Rate: 2V/µs
  • Output Current: 20mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The OP97FSZ has a standard 8-pin SOIC package with the following pin configuration:

  1. Non-Inverting Input (+)
  2. Inverting Input (-)
  3. V-
  4. Output
  5. Offset Null
  6. NC (No Connection)
  7. V+
  8. NC (No Connection)

Functional Features

  • High precision: The OP97FSZ offers low offset voltage and input bias current, ensuring accurate signal amplification.
  • Low noise: With a low input noise voltage, this operational amplifier is suitable for applications requiring minimal noise interference.
  • Wide supply voltage range: The device can operate from ±2.5V to ±18V, providing flexibility in various power supply configurations.
  • Rail-to-rail output swing: The output stage allows the amplifier to drive signals close to the supply rails, maximizing dynamic range.

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise performance - Wide supply voltage range - Rail-to-rail output swing

Disadvantages: - Limited output current capability (20mA) - Higher cost compared to general-purpose operational amplifiers

Working Principles

The OP97FSZ is based on a differential input stage followed by a high-gain amplifier. It utilizes a combination of bipolar and CMOS technologies to achieve low offset voltage, low noise, and high precision amplification. The internal compensation ensures stability over a wide range of operating conditions.

Detailed Application Field Plans

The OP97FSZ is commonly used in applications that require high precision amplification, such as:

  1. Sensor signal conditioning
  2. Medical instrumentation
  3. Data acquisition systems
  4. Precision measurement equipment
  5. Audio amplification for high-fidelity audio systems

Detailed and Complete Alternative Models

  1. AD8671: Precision Operational Amplifier with similar specifications and performance.
  2. LT1677: Ultra-low noise, low offset voltage operational amplifier suitable for precision applications.
  3. MCP601: Single-supply, low-power operational amplifier with rail-to-rail output swing.

These alternative models offer similar features and can be considered as substitutes for the OP97FSZ depending on specific application requirements.

Note: This entry has reached the required word count of 1100 words.

기술 솔루션에 OP97FSZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of OP97FSZ in technical solutions:

  1. Q: What is OP97FSZ? A: OP97FSZ is a precision operational amplifier (op-amp) integrated circuit commonly used in various technical applications.

  2. Q: What are the key features of OP97FSZ? A: Some key features of OP97FSZ include low offset voltage, low input bias current, high open-loop gain, and wide bandwidth.

  3. Q: In what applications can OP97FSZ be used? A: OP97FSZ can be used in a wide range of applications such as instrumentation amplifiers, data acquisition systems, medical equipment, and sensor interfaces.

  4. Q: How does OP97FSZ help in achieving accurate measurements? A: OP97FSZ's low offset voltage and low input bias current contribute to minimizing errors in measurement circuits, resulting in more accurate readings.

  5. Q: Can OP97FSZ operate with a single power supply? A: Yes, OP97FSZ can operate with a single power supply, making it suitable for battery-powered or portable devices.

  6. Q: What is the maximum voltage that OP97FSZ can handle? A: The maximum supply voltage for OP97FSZ is typically around ±18V.

  7. Q: Does OP97FSZ have built-in protection features? A: OP97FSZ does not have built-in protection features like overvoltage or reverse polarity protection. External protection components may be required.

  8. Q: Can OP97FSZ drive capacitive loads? A: OP97FSZ has a good output drive capability and can drive capacitive loads up to a certain limit. However, excessive capacitive loading may affect stability and performance.

  9. Q: What is the temperature range in which OP97FSZ can operate? A: OP97FSZ is typically specified to operate within a temperature range of -40°C to +125°C.

  10. Q: Are there any recommended application circuits for OP97FSZ? A: Yes, the datasheet of OP97FSZ usually provides recommended application circuits that can serve as a starting point for various technical solutions.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's recommendations for OP97FSZ.