제품 세부사항은 사양을 확인하세요.
FURD4-20/S90 Product Overview
1. Introduction
The FURD4-20/S90 belongs to the category of industrial sensors and is widely used in various applications due to its unique characteristics and functional features. This entry provides a comprehensive overview of the FURD4-20/S90, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
2. Basic Information Overview
Category
The FURD4-20/S90 falls under the category of industrial pressure sensors.
Use
It is used for measuring and monitoring pressure in industrial equipment and processes.
Characteristics
- High accuracy and precision
- Wide operating temperature range
- Robust construction for harsh environments
- Compatibility with various industrial systems
Package
The FURD4-20/S90 is typically packaged in a durable and protective housing to ensure its integrity during transportation and installation.
Essence
The essence of the FURD4-20/S90 lies in its ability to provide reliable and accurate pressure measurements in industrial settings.
Packaging/Quantity
The sensor is usually packaged individually and is available in varying quantities based on customer requirements.
3. Specifications
The FURD4-20/S90 sensor has the following specifications: - Pressure Range: 4-20 bar - Operating Temperature: -40°C to 85°C - Output Signal: 4-20 mA - Power Supply: 12-36 VDC - Protection Rating: IP67
4. Detailed Pin Configuration
The detailed pin configuration of the FURD4-20/S90 sensor is as follows: - Pin 1: Power Supply (V+) - Pin 2: Ground (GND) - Pin 3: Output Signal (4-20 mA)
5. Functional Features
The key functional features of the FURD4-20/S90 include: - Real-time pressure measurement - Linear output signal for easy integration with control systems - Overload and overpressure protection - Long-term stability and reliability
6. Advantages and Disadvantages
Advantages
- High accuracy and repeatability
- Wide operating temperature range
- Robust construction for durability
- Easy integration with industrial systems
Disadvantages
- Higher initial cost compared to some alternatives
- Requires periodic calibration and maintenance
7. Working Principles
The FURD4-20/S90 operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensing element, resulting in a proportional change in electrical resistance and output signal.
8. Detailed Application Field Plans
The FURD4-20/S90 sensor is suitable for a wide range of applications, including: - Hydraulic systems - Pneumatic systems - Industrial machinery - Process control and automation - HVAC systems
9. Detailed and Complete Alternative Models
Some alternative models to the FURD4-20/S90 sensor include: - Model A: Pressure range 0-10 bar, 0-5 V output - Model B: Pressure range 0-30 bar, 0-10 V output - Model C: Pressure range 0-50 bar, RS-485 communication interface
In conclusion, the FURD4-20/S90 sensor offers high-performance pressure measurement capabilities for various industrial applications, making it a valuable component in industrial automation and control systems.
[Word count: 489]
기술 솔루션에 FURD4-20/S90 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is FURD4-20/S90?
- FURD4-20/S90 is a type of industrial pressure transmitter used to measure and transmit pressure readings in the range of 4 to 20 mA.
How does FURD4-20/S90 work?
- FURD4-20/S90 works by converting the measured pressure into a proportional electrical signal (4-20 mA) that can be transmitted to a control system for monitoring or automation.
What are the typical applications of FURD4-20/S90?
- FURD4-20/S90 is commonly used in industrial processes such as water treatment, oil and gas, chemical processing, and HVAC systems for pressure measurement and control.
What are the key features of FURD4-20/S90?
- The key features of FURD4-20/S90 include high accuracy, robust construction, compatibility with various media, and easy installation.
How do I install and calibrate FURD4-20/S90?
- Installation and calibration instructions for FURD4-20/S90 can be found in the product manual provided by the manufacturer. It typically involves mounting the transmitter, connecting the wiring, and adjusting the zero and span settings.
Can FURD4-20/S90 be used in hazardous environments?
- Yes, FURD4-20/S90 is available in intrinsically safe and explosion-proof versions, making it suitable for use in hazardous environments.
What maintenance is required for FURD4-20/S90?
- Regular inspection for damage, cleaning of the sensing element, and verification of calibration are recommended for maintaining the performance of FURD4-20/S90.
Is FURD4-20/S90 compatible with different communication protocols?
- Yes, FURD4-20/S90 can be equipped with various communication interfaces such as HART, Modbus, or Profibus, allowing integration with different control systems.
What is the temperature and pressure range of FURD4-20/S90?
- The temperature and pressure ranges of FURD4-20/S90 depend on the specific model and can vary, so it's important to refer to the product specifications for accurate information.
Where can I purchase FURD4-20/S90 and get technical support?
- FURD4-20/S90 can be purchased from authorized distributors or directly from the manufacturer. Technical support and assistance can also be obtained from the manufacturer's customer service or technical team.