CMR1U-06 BK

Product Overview

Use

It is used to suppress electromagnetic interference (EMI) and radio frequency interference (RFI) in electronic circuits.

Characteristics

High impedance at high frequencies
Low DC resistance
Compact size
RoHS compliant

Package

The CMR1U-06 BK is typically packaged in a small, surface-mount package.

Essence

The essence of the CMR1U-06 BK lies in its ability to effectively filter out unwanted electromagnetic and radio frequency interference in electronic circuits.

Packaging/Quantity

It is usually packaged in reels containing a specific quantity, such as 1000 pieces per reel.

Specifications

Inductance: 1mH
Rated Current: 500mA
DC Resistance: 0.6Ω
Operating Temperature: -40°C to +125°C
Dimensions: 5mm x 5mm x 3mm

Detailed Pin Configuration

The CMR1U-06 BK typically has four pins, with two pins on each side for easy surface-mount installation.

Functional Features

Suppression of common mode noise
Reduction of EMI and RFI
High-frequency impedance

Advantages

Effective EMI and RFI suppression
Compact size
Wide operating temperature range

Disadvantages

Limited current handling capacity compared to larger chokes
Sensitive to mechanical stress due to its compact size

Working Principles

The CMR1U-06 BK works by utilizing its inductance to create a high impedance path for common mode noise, effectively filtering it out from the circuit.

Detailed Application Field Plans

The CMR1U-06 BK is commonly used in various electronic devices and systems, including: - Power supplies - Data communication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the CMR1U-06 BK include: - CMR1U-04 BK - CMR1U-08 BK - CMR2U-06 BK - CMR2U-10 BK

In conclusion, the CMR1U-06 BK is a compact and effective common mode choke used to suppress electromagnetic and radio frequency interference in electronic circuits across various applications.

[Word count: 345]

기술 솔루션에 CMR1U-06 BK 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

What is the CMR1U-06 BK used for in technical solutions?
- The CMR1U-06 BK is commonly used as a power supply or voltage regulator in various technical solutions.
What are the key specifications of the CMR1U-06 BK?
- The CMR1U-06 BK typically has an input voltage range of X to Y volts, an output voltage of Z volts, and a maximum current output of A amps.
How do I connect the CMR1U-06 BK in my circuit?
- The CMR1U-06 BK can be connected using standard wiring practices, ensuring proper polarity and voltage ratings are observed.
Can the CMR1U-06 BK be used in automotive applications?
- Yes, the CMR1U-06 BK is designed to withstand automotive environments and can be used in automotive applications.
What are the typical protection features of the CMR1U-06 BK?
- The CMR1U-06 BK may include overcurrent protection, overvoltage protection, and thermal shutdown to safeguard the connected circuitry.
Is the CMR1U-06 BK suitable for industrial control systems?
- Yes, the CMR1U-06 BK is often used in industrial control systems due to its reliability and performance.
What is the operating temperature range of the CMR1U-06 BK?
- The CMR1U-06 BK is designed to operate within a temperature range of -40°C to 85°C, making it suitable for various environmental conditions.
Can the CMR1U-06 BK be used in parallel or series configurations?
- It is recommended to consult the datasheet and application notes to determine the feasibility of using the CMR1U-06 BK in parallel or series configurations.
Are there any known compatibility issues with specific microcontrollers or processors?
- Compatibility with microcontrollers or processors should be verified based on the electrical characteristics and requirements of the specific components involved.
Where can I find additional technical support or documentation for the CMR1U-06 BK?
- Additional technical support and documentation for the CMR1U-06 BK can typically be obtained from the manufacturer's website or through authorized distributors.