Diodes Incorporated
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MBR10200CT
자세히보기 데이터시트

MBR10200CT

Introduction

The MBR10200CT is a Schottky barrier rectifier designed for high efficiency and low power loss applications. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Product Overview

  • Category: Electronic Components
  • Use: The MBR10200CT is used as a rectifier in various electronic circuits to convert alternating current (AC) to direct current (DC).
  • Characteristics: It is known for its high efficiency, low power loss, and fast switching capabilities.
  • Package: The MBR10200CT is typically available in a TO-220AB package.
  • Essence: It is designed to provide reliable and efficient rectification in electronic circuits.
  • Packaging/Quantity: The product is commonly sold in reels or tubes containing multiple units.

Specifications

  • Voltage Rating: 200V
  • Forward Current: 10A
  • Reverse Voltage: 200V
  • Forward Voltage Drop: 0.85V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR10200CT typically has three pins: 1. Anode 2. Cathode 3. Gate

Functional Features

  • Fast switching speed
  • Low forward voltage drop
  • High thermal stability
  • High reliability

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low power loss
  • Fast switching
  • Reliable performance

Disadvantages

  • Higher cost compared to standard rectifiers
  • Sensitive to overvoltage conditions

Working Principles

The MBR10200CT operates based on the Schottky barrier principle, which allows for faster switching and lower forward voltage drop compared to conventional rectifiers. When a forward voltage is applied, the Schottky barrier facilitates the flow of current with minimal resistance, resulting in efficient rectification.

Detailed Application Field Plans

The MBR10200CT is commonly used in the following applications: - Switching power supplies - DC-DC converters - Inverters - Battery chargers - Motor drives

Detailed and Complete Alternative Models

Some alternative models to the MBR10200CT include: - MBR1045CT - MBR1060CT - MBR1080CT - MBR10100CT

In conclusion, the MBR10200CT is a high-performance Schottky barrier rectifier with excellent efficiency and reliability, making it suitable for a wide range of electronic applications.

[Word count: 398]

기술 솔루션에 MBR10200CT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is MBR10200CT?

    • MBR10200CT is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as switch mode power supply, free-wheeling diodes, and reverse battery protection.

  2. What is the maximum forward voltage drop of MBR10200CT?

    • The maximum forward voltage drop of MBR10200CT is typically around 0.65V at a forward current of 10A.

  3. What is the reverse voltage rating of MBR10200CT?

    • MBR10200CT has a reverse voltage rating of 200V.

  4. What is the typical junction capacitance of MBR10200CT?

    • The typical junction capacitance of MBR10200CT is around 300pF at a reverse bias of 4V.

  5. What are the recommended operating temperature range for MBR10200CT?

    • The recommended operating temperature range for MBR10200CT is -55°C to +150°C.

  6. Can MBR10200CT be used in high-frequency applications?

    • Yes, MBR10200CT is suitable for high-frequency applications due to its fast switching capability and low junction capacitance.

  7. What are the typical applications of MBR10200CT?

    • Typical applications of MBR10200CT include power supplies, DC-DC converters, motor drives, and reverse polarity protection circuits.

  8. Does MBR10200CT require a heatsink for operation?

    • It is recommended to use a heatsink for MBR10200CT when operating at high currents or in high ambient temperatures to ensure optimal performance and reliability.

  9. Is MBR10200CT RoHS compliant?

    • Yes, MBR10200CT is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  10. What are the key advantages of using MBR10200CT in technical solutions?

    • The key advantages of using MBR10200CT include low forward voltage drop, high efficiency, fast switching speed, and suitability for high-frequency applications, making it ideal for various power management and control applications.