PI4ULS3V302XVEX
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Level Shifter
- Characteristics:
- Low voltage level shifting
- High-speed data transmission
- Wide operating voltage range
- Small package size
- Package: X2QFN-10
- Essence: This IC is designed to shift logic levels between different voltage domains, enabling seamless communication between devices operating at different voltage levels.
- Packaging/Quantity: Available in tape and reel packaging with a quantity of 3000 units per reel.
Specifications
- Supply Voltage Range: 1.2V to 3.6V
- Input Voltage Range (A Port): 0V to VCCA + 0.5V
- Input Voltage Range (B Port): 0V to VCCB + 0.5V
- Output Voltage Range (Y Port): 0V to VCCY + 0.5V
- Maximum Data Rate: 100 Mbps
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The PI4ULS3V302XVEX IC has the following pin configuration:
___________
| |
A1 |1 10| VCCA
A2 |2 9| B1
A3 |3 8| B2
GND|4 7| B3
VCC|5 6| Y
|___________|
Functional Features
- Bidirectional level shifting between two voltage domains (A and B ports)
- Automatic direction sensing for simplified interface design
- Supports high-speed data transmission up to 100 Mbps
- Wide operating voltage range allows compatibility with various systems
- Low power consumption for energy-efficient operation
Advantages
- Enables seamless communication between devices operating at different voltage levels
- Compact package size saves board space
- High-speed data transmission capability
- Automatic direction sensing simplifies system design
Disadvantages
- Limited to a maximum data rate of 100 Mbps
- Not suitable for applications requiring higher voltage level shifting
Working Principles
The PI4ULS3V302XVEX operates by detecting the logic level of the input signals on the A and B ports and automatically shifting them to the appropriate voltage level. It utilizes internal circuitry to ensure bidirectional level shifting, allowing data to flow in both directions. The IC is designed to minimize power consumption while maintaining high-speed data transmission.
Detailed Application Field Plans
The PI4ULS3V302XVEX is commonly used in various applications where level shifting between different voltage domains is required. Some typical application fields include: - Communication systems - Industrial automation - Consumer electronics - Automotive electronics - Internet of Things (IoT) devices
Detailed and Complete Alternative Models
- PI4ULS3V304XVEX: Similar to PI4ULS3V302XVEX but with four bidirectional channels instead of three.
- PI4ULS3V301XVEX: Single-channel level shifter with similar characteristics and features.
These alternative models offer similar functionality and can be considered as alternatives based on specific application requirements.
Word count: 314 words
기술 솔루션에 PI4ULS3V302XVEX 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of PI4ULS3V302XVEX in technical solutions:
Q: What is PI4ULS3V302XVEX? A: PI4ULS3V302XVEX is a specific integrated circuit (IC) designed for level shifting and voltage translation applications.
Q: What is the voltage range supported by PI4ULS3V302XVEX? A: PI4ULS3V302XVEX supports voltage translation between 1.2V and 3.3V.
Q: Can PI4ULS3V302XVEX be used bidirectionally? A: Yes, PI4ULS3V302XVEX can perform bidirectional voltage translation.
Q: What is the maximum data rate supported by PI4ULS3V302XVEX? A: PI4ULS3V302XVEX supports data rates up to 100 Mbps.
Q: How many channels does PI4ULS3V302XVEX have? A: PI4ULS3V302XVEX has three independent channels for voltage translation.
Q: Can PI4ULS3V302XVEX handle open-drain or push-pull signals? A: Yes, PI4ULS3V302XVEX can handle both open-drain and push-pull signals.
Q: Is PI4ULS3V302XVEX compatible with I2C and SPI interfaces? A: Yes, PI4ULS3V302XVEX is compatible with both I2C and SPI interfaces.
Q: Does PI4ULS3V302XVEX require external components for operation? A: Yes, PI4ULS3V302XVEX requires external pull-up resistors for proper operation.
Q: What is the power supply voltage range for PI4ULS3V302XVEX? A: PI4ULS3V302XVEX operates with a power supply voltage range of 1.65V to 3.6V.
Q: Can PI4ULS3V302XVEX be used in automotive applications? A: Yes, PI4ULS3V302XVEX is suitable for automotive applications as it meets the necessary standards and requirements.
Please note that these answers are general and may vary depending on the specific application and use case. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.