이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ZXCL280H5TA

ZXCL280H5TA

Product Overview

Category

ZXCL280H5TA belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range

Package

The ZXCL280H5TA comes in a small surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of ZXCL280H5TA lies in its ability to regulate voltage with high efficiency and low dropout voltage.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ZXCL280H5TA has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (active high)

Functional Features

  • Low quiescent current consumption
  • Thermal shutdown protection
  • Short-circuit current limiting
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Low dropout voltage

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

The ZXCL280H5TA operates as a linear voltage regulator. It regulates the output voltage by comparing the reference voltage with the feedback voltage. The internal circuitry adjusts the pass transistor to maintain a stable output voltage.

Detailed Application Field Plans

The ZXCL280H5TA is commonly used in various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ZXCL280H5TA are: - LM1117 - MCP1700 - LP2985 - XC6206

These models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, ZXCL280H5TA is a compact and efficient voltage regulator suitable for a wide range of electronic applications. Its small form factor, low dropout voltage, and wide input voltage range make it an ideal choice for battery-powered and portable devices. However, its limited maximum output current should be taken into consideration when designing high-current applications.

기술 솔루션에 ZXCL280H5TA 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ZXCL280H5TA in technical solutions:

  1. Q: What is ZXCL280H5TA? A: ZXCL280H5TA is a voltage reference and shunt regulator IC manufactured by Diodes Incorporated.

  2. Q: What is the typical input voltage range for ZXCL280H5TA? A: The typical input voltage range for ZXCL280H5TA is from 2.5V to 36V.

  3. Q: What is the output voltage accuracy of ZXCL280H5TA? A: The output voltage accuracy of ZXCL280H5TA is typically ±1%.

  4. Q: Can ZXCL280H5TA be used as a voltage reference in precision measurement applications? A: Yes, ZXCL280H5TA can be used as a voltage reference in precision measurement applications due to its low output voltage drift and high stability.

  5. Q: Is ZXCL280H5TA suitable for battery-powered applications? A: Yes, ZXCL280H5TA is suitable for battery-powered applications as it has a low quiescent current of typically 60µA.

  6. Q: Can ZXCL280H5TA handle high current loads? A: No, ZXCL280H5TA is not designed to handle high current loads. It is primarily used as a voltage reference and shunt regulator.

  7. Q: What is the temperature range of operation for ZXCL280H5TA? A: ZXCL280H5TA can operate within a temperature range of -40°C to +125°C.

  8. Q: Does ZXCL280H5TA require any external components for operation? A: Yes, ZXCL280H5TA requires an external resistor to set the desired output voltage.

  9. Q: Can ZXCL280H5TA be used in automotive applications? A: Yes, ZXCL280H5TA is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification.

  10. Q: What are some typical applications of ZXCL280H5TA? A: Some typical applications of ZXCL280H5TA include power management, precision measurement, battery-powered devices, and automotive electronics.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.