Exar Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
XR16V554IJTR-F
자세히보기 데이터시트

XR16V554IJTR-F

Product Overview

Category

The XR16V554IJTR-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for data communication and control purposes.

Characteristics

  • High-performance integrated circuit
  • Designed for serial communication applications
  • Offers multiple features for efficient data transfer
  • Compact size for space-constrained designs

Package

The XR16V554IJTR-F is available in a small form factor package, typically a 48-pin Thin Quad Flat Pack (TQFP).

Essence

This IC serves as a key component in enabling reliable and fast data communication within electronic systems.

Packaging/Quantity

The XR16V554IJTR-F is usually packaged in reels or tubes, with a typical quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 3 Mbps
  • Number of Channels: 4
  • Interface Type: UART (Universal Asynchronous Receiver Transmitter)
  • Package Type: TQFP-48

Detailed Pin Configuration

The XR16V554IJTR-F has a total of 48 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. TXD1
  4. RXD1
  5. CTS1
  6. RTS1
  7. TXD2
  8. RXD2
  9. CTS2
  10. RTS2
  11. TXD3
  12. RXD3
  13. CTS3
  14. RTS3
  15. TXD4
  16. RXD4
  17. CTS4
  18. RTS4
  19. INT
  20. SCLK
  21. SDATA
  22. SLOAD
  23. RESET
  24. VCCIO
  25. GNDIO
  26. TXD5
  27. RXD5
  28. CTS5
  29. RTS5
  30. TXD6
  31. RXD6
  32. CTS6
  33. RTS6
  34. TXD7
  35. RXD7
  36. CTS7
  37. RTS7
  38. TXD8
  39. RXD8
  40. CTS8
  41. RTS8
  42. TXD9
  43. RXD9
  44. CTS9
  45. RTS9
  46. TXD10
  47. RXD10
  48. CTS10

Functional Features

  • UART interface for serial communication
  • Multiple channels for simultaneous data transfer
  • Programmable baud rate generator
  • Automatic hardware and software flow control
  • Support for various data formats (e.g., 8-bit, 9-bit, etc.)
  • Built-in FIFO buffers for efficient data handling

Advantages and Disadvantages

Advantages

  • High-performance data communication capabilities
  • Compact size for space-constrained designs
  • Versatile interface options
  • Efficient flow control mechanisms
  • Reliable and robust operation

Disadvantages

  • Limited number of channels (4 in this case)
  • Requires external components for complete functionality
  • May have a learning curve for inexperienced users

Working Principles

The XR16V554IJTR-F operates based on the principles of UART communication. It receives and transmits data in a serial format using specific protocols and timing. The IC incorporates various features to ensure reliable and efficient data transfer, such as flow control, buffering, and baud rate generation.

Detailed Application Field Plans

The XR16V554IJTR-F finds applications in various fields, including but not limited to:

  1. Industrial automation systems
  2. Networking equipment
  3. Embedded systems
  4. Telecommunications devices
  5. Medical instruments
  6. Consumer electronics

Detailed and Complete Alternative Models

  1. XR16V554IJTR-F: The model discussed in this entry.
  2. XR16V554IJTR-G: Similar to the XR16V554IJTR-F, with minor variations in specifications.
  3. XR16V554IJTR-H: An enhanced version of the XR16V554IJTR-F, offering additional features.

Note: The alternative models mentioned above are just a few examples. There may be other similar ICs available from different manufacturers.

Word count: 550 words

기술 솔루션에 XR16V554IJTR-F 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of XR16V554IJTR-F in technical solutions:

  1. Question: What is XR16V554IJTR-F?
    - Answer: XR16V554IJTR-F is a specific model of integrated circuit (IC) designed for use in technical solutions.

  2. Question: What is the purpose of XR16V554IJTR-F?
    - Answer: XR16V554IJTR-F is commonly used as a UART (Universal Asynchronous Receiver/Transmitter) IC, which enables serial communication between microcontrollers or other devices.

  3. Question: What are the key features of XR16V554IJTR-F?
    - Answer: Some key features of XR16V554IJTR-F include multiple UART channels, high-speed data transfer rates, low power consumption, and support for various protocols.

  4. Question: In what applications can XR16V554IJTR-F be used?
    - Answer: XR16V554IJTR-F can be used in a wide range of applications such as industrial automation, embedded systems, robotics, IoT devices, and communication equipment.

  5. Question: How many UART channels does XR16V554IJTR-F support?
    - Answer: XR16V554IJTR-F supports up to four independent UART channels, allowing simultaneous communication with multiple devices.

  6. Question: What is the maximum data transfer rate supported by XR16V554IJTR-F?
    - Answer: XR16V554IJTR-F supports high-speed data transfer rates up to 3 Mbps, ensuring efficient and reliable communication.

  7. Question: Does XR16V554IJTR-F require external components for operation?
    - Answer: Yes, XR16V554IJTR-F requires external components such as crystal oscillators, capacitors, and resistors for proper operation.

  8. Question: Is XR16V554IJTR-F compatible with different microcontrollers?
    - Answer: Yes, XR16V554IJTR-F is designed to be compatible with various microcontrollers and can be easily integrated into different systems.

  9. Question: Can XR16V554IJTR-F handle both full-duplex and half-duplex communication?
    - Answer: Yes, XR16V554IJTR-F supports both full-duplex and half-duplex communication modes, providing flexibility in different applications.

  10. Question: Are there any development tools or resources available for XR16V554IJTR-F?
    - Answer: Yes, the manufacturer of XR16V554IJTR-F provides development tools, documentation, and technical support to assist engineers in integrating the IC into their designs.

Please note that the specific details and answers may vary depending on the application and requirements.