Honeywell Sensing and Productivity Solutions
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
PX2AG1XX010BSAAX
자세히보기 데이터시트

PX2AG1XX010BSAAX

Product Overview

  • Category: Electronic Component
  • Use: Signal Processing
  • Characteristics: High precision, low power consumption
  • Package: Surface Mount
  • Essence: Amplifier IC
  • Packaging/Quantity: 100 pieces per reel

Specifications

  • Voltage Supply: 3V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Gain Bandwidth Product: 10MHz
  • Input Offset Voltage: ±0.5mV
  • Slew Rate: 0.5V/μs
  • Quiescent Current: 500μA

Detailed Pin Configuration

  1. VCC
  2. Inverting Input
  3. Non-Inverting Input
  4. Ground
  5. Output

Functional Features

  • Low input offset voltage
  • Wide voltage supply range
  • Low quiescent current
  • High gain bandwidth product
  • Rail-to-rail output swing

Advantages and Disadvantages

Advantages

  • High precision
  • Low power consumption
  • Wide operating temperature range
  • Small package size
  • Suitable for battery-powered applications

Disadvantages

  • Limited output current capability
  • Sensitive to electromagnetic interference

Working Principles

The PX2AG1XX010BSAAX is a precision operational amplifier designed to amplify small differential input signals while maintaining high accuracy and low power consumption. It utilizes a combination of internal circuitry to achieve high gain bandwidth product and low input offset voltage.

Detailed Application Field Plans

  1. Portable Medical Devices: Due to its low power consumption and high precision, the PX2AG1XX010BSAAX is suitable for use in portable medical devices such as blood glucose monitors and pulse oximeters.
  2. Industrial Control Systems: The amplifier's wide operating temperature range makes it ideal for use in industrial control systems where reliability under harsh conditions is crucial.
  3. Sensor Interface Circuits: Its low input offset voltage and rail-to-rail output swing make it suitable for sensor interface circuits in automotive and industrial applications.

Detailed and Complete Alternative Models

  1. OP27GZ
  2. LT1677CS8
  3. MCP602-I/P
  4. MAX4239AUT-T

This completes the entry for PX2AG1XX010BSAAX, covering its basic information overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

기술 솔루션에 PX2AG1XX010BSAAX 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is PX2AG1XX010BSAAX?

    • PX2AG1XX010BSAAX is a specific model of pressure sensor designed for industrial applications.

  2. What are the key features of PX2AG1XX010BSAAX?

    • The key features include high accuracy, wide operating temperature range, and compatibility with various media types.

  3. What is the typical application of PX2AG1XX010BSAAX?

    • It is commonly used in hydraulic systems, pneumatic systems, and industrial automation for pressure monitoring and control.

  4. What is the operating voltage range of PX2AG1XX010BSAAX?

    • The operating voltage range is typically 10-30V DC.

  5. What output signals does PX2AG1XX010BSAAX provide?

    • It can provide analog output signals such as 4-20mA or 0-10V, depending on the configuration.

  6. Is PX2AG1XX010BSAAX suitable for harsh environments?

    • Yes, it is designed to withstand harsh industrial environments and has a rugged construction.

  7. Can PX2AG1XX010BSAAX be used for both liquid and gas pressure measurements?

    • Yes, it is suitable for measuring both liquid and gas pressures within its specified range.

  8. What is the accuracy of PX2AG1XX010BSAAX?

    • The accuracy is typically within ±0.5% of full scale.

  9. Does PX2AG1XX010BSAAX require calibration?

    • Periodic calibration is recommended to maintain accuracy, especially in critical applications.

  10. Are there any special installation considerations for PX2AG1XX010BSAAX?

    • It is important to ensure proper mounting and sealing to prevent damage and ensure accurate readings.