72V3680L10PFI

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High voltage, low power consumption
• Package: LQFP (Low-profile Quad Flat Package)
• Essence: Voltage regulator and power management IC
• Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

• Input Voltage Range: 6V to 72V
• Output Voltage Range: 1.2V to 5.5V
• Output Current: Up to 3A
• Operating Temperature Range: -40°C to +85°C
• Efficiency: Up to 95%
• Protection Features: Overvoltage protection, overcurrent protection, thermal shutdown

Detailed Pin Configuration

The 72V3680L10PFI has a total of 32 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input voltage | | 2 | GND | Ground | | 3 | EN | Enable control | | 4 | FB | Feedback voltage | | 5 | VOUT | Output voltage | | ... | ... | ... | | 32 | NC | No connection |

Functional Features

• Wide input voltage range allows for versatile applications
• High efficiency ensures minimal power loss
• Built-in protection features safeguard the circuit and connected devices
• Low power consumption extends battery life
• Adjustable output voltage provides flexibility in different scenarios

Advantages

• Suitable for various power management applications due to wide input voltage range
• Compact package size enables space-saving designs
• High efficiency reduces energy waste and heat generation
• Robust protection features enhance system reliability
• Low power consumption prolongs battery life in portable devices

Disadvantages

• Limited output current may not be sufficient for high-power applications
• Higher cost compared to standard voltage regulators
• Requires careful thermal management due to potential heat dissipation

Working Principles

The 72V3680L10PFI is a voltage regulator and power management IC. It regulates the input voltage within a specified range and provides a stable output voltage to power electronic components. The IC utilizes various internal circuitry, such as switching regulators and feedback mechanisms, to achieve efficient voltage conversion.

Detailed Application Field Plans

The 72V3680L10PFI is commonly used in the following application fields: 1. Automotive electronics: Powering infotainment systems, lighting modules, and motor control units. 2. Industrial automation: Providing regulated power to control panels, sensors, and actuators. 3. Renewable energy systems: Regulating voltage in solar power inverters and wind turbine controllers. 4. Telecommunications: Powering network equipment, base stations, and communication modules. 5. Consumer electronics: Supplying power to smart home devices, portable gadgets, and audio/video equipment.

Detailed and Complete Alternative Models

1. 72V3680L05PFI: Similar to 72V3680L10PFI but with a lower output voltage range of 1.2V to 3.3V.
2. 72V3680H10PFI: Higher power variant with an output current capability of up to 5A.
3. 72V3680L10PFM: Same specifications as 72V3680L10PFI but in a smaller QFN package.

(Note: These alternative models are provided for reference and may have slight differences in features and pin configuration.)

This entry provides comprehensive information about the 72V3680L10PFI integrated circuit. It covers its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.