87016AYILF

Overview

• Category: Electronic Component
• Use: Integrated Circuit
• Characteristics: High-performance, Low-power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Analog-to-Digital Converter (ADC)
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Resolution: 16-bit
• Sampling Rate: 1 MSPS (Million Samples Per Second)
• Input Voltage Range: 0V to Vref
• Power Supply Voltage: 2.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C

Pin Configuration

The 87016AYILF has a total of 24 pins. The pin configuration is as follows:

1. VDD - Power Supply Voltage
2. VREF - Reference Voltage
3. AGND - Analog Ground
4. VIN+ - Positive Analog Input
5. VIN- - Negative Analog Input
6. DGND - Digital Ground
7. SCLK - Serial Clock Input
8. SDATA - Serial Data Output
9. CS - Chip Select Input
10. SHDN - Shutdown Input
11. REFOUT - Reference Output
12. AVDD - Analog Power Supply Voltage
13. D0 - Digital Output Bit 0
14. D1 - Digital Output Bit 1
15. D2 - Digital Output Bit 2
16. D3 - Digital Output Bit 3
17. D4 - Digital Output Bit 4
18. D5 - Digital Output Bit 5
19. D6 - Digital Output Bit 6
20. D7 - Digital Output Bit 7
21. D8 - Digital Output Bit 8
22. D9 - Digital Output Bit 9
23. D10 - Digital Output Bit 10
24. D11 - Digital Output Bit 11

Functional Characteristics

The 87016AYILF is a high-performance 16-bit ADC that converts analog signals into digital data. It offers a resolution of 16 bits, allowing for precise and accurate conversion. The ADC operates at a sampling rate of 1 MSPS, enabling fast and efficient data acquisition.

The device accepts input voltages in the range of 0V to Vref, making it suitable for a wide range of applications. It operates on a power supply voltage between 2.7V and 5.5V, providing flexibility in various power scenarios. The ADC also features a shutdown input (SHDN) for power-saving purposes.

Advantages and Disadvantages

Advantages: - High-resolution conversion - Fast sampling rate - Wide input voltage range - Low-power consumption - Shutdown mode for power-saving

Disadvantages: - Limited number of digital output bits (12 bits)

Applicable Range of Products

The 87016AYILF is commonly used in applications that require high-precision analog-to-digital conversion. It finds extensive use in industries such as telecommunications, industrial automation, medical equipment, and scientific instruments.

Working Principles

The 87016AYILF utilizes successive approximation register (SAR) architecture to perform the analog-to-digital conversion. It samples the analog input voltage and compares it with a reference voltage. The internal circuitry then determines the digital representation of the input voltage based on the comparison results.

Detailed Application Field Plans

The 87016AYILF can be applied in various fields, including:

1. Telecommunications: Used in communication systems for signal processing and data acquisition.
2. Industrial Automation: Enables precise measurement and control in industrial processes.
3. Medical Equipment: Provides accurate data conversion in medical devices like patient monitors and diagnostic equipment.
4. Scientific Instruments: Used in scientific research for data acquisition and analysis.
5. Consumer Electronics: Enables high-resolution audio and video processing in multimedia devices.

Detailed Alternative Models

1. 87016BYILF: Similar to the 87016AYILF but with extended temperature range (-55°C to +125°C).
2. 87016CYILF: Higher resolution variant with 24-bit conversion capability.
3. 87016DYILF: Low-power version with reduced power consumption for battery-operated applications.

5 Common Technical Questions and Answers

1. Q: What is the maximum input voltage that the 87016AYILF can handle? A: The ADC can accept input voltages up to Vref, as specified in the datasheet.

2. Q: Can the 87016AYILF operate at a lower supply voltage than 2.7V? A: No, the minimum operating voltage for the ADC is 2.7V.

3. Q: How does the shutdown mode work? A: When the SHDN input is activated, the ADC enters