IDT, Integrated Device Technology Inc
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
8N3SV75BC-0100CDI8
자세히보기 데이터시트

8N3SV75BC-0100CDI8

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Controlled Oscillator (VCO)
  • Characteristics: High frequency range, low phase noise, compact size
  • Package: Surface Mount Technology (SMT)
  • Essence: Frequency generation and control
  • Packaging/Quantity: Tape and reel packaging, 250 units per reel

Specifications

  • Frequency Range: 1.5 GHz to 2.5 GHz
  • Supply Voltage: 3.3 V
  • Output Power: -4 dBm
  • Phase Noise: -110 dBc/Hz at 10 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The 8N3SV75BC-0100CDI8 IC has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VCC | Power supply voltage input | | 2 | GND | Ground reference | | 3 | OUT | Output signal | | 4 | CTRL | Control voltage input |

Functional Features

  • Wide frequency range allows for versatile applications
  • Low phase noise ensures high signal quality
  • Compact size enables integration in space-constrained designs
  • Precise control voltage input for accurate frequency adjustment

Advantages

  • High frequency range provides flexibility in various applications
  • Low phase noise ensures minimal interference with other components
  • Compact size saves valuable board space
  • Accurate frequency control allows for precise tuning

Disadvantages

  • Limited output power may require additional amplification stages
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The 8N3SV75BC-0100CDI8 is a voltage-controlled oscillator (VCO) that generates a frequency output based on the control voltage applied to the CTRL pin. The VCO circuitry inside the IC produces an oscillating signal within the specified frequency range. The output signal is then available at the OUT pin.

Detailed Application Field Plans

The 8N3SV75BC-0100CDI8 IC finds applications in various fields, including: 1. Wireless communication systems 2. Radar systems 3. Satellite communication equipment 4. Test and measurement instruments 5. Frequency synthesizers

Detailed and Complete Alternative Models

  1. 8N3SV75BC-0200CDI8: Similar to 8N3SV75BC-0100CDI8 but with a frequency range of 2 GHz to 3 GHz.
  2. 8N3SV75BC-0050CDI8: Similar to 8N3SV75BC-0100CDI8 but with a lower frequency range of 500 MHz to 1 GHz.
  3. 8N3SV75BC-0150CDI8: Similar to 8N3SV75BC-0100CDI8 but with a higher frequency range of 1.5 GHz to 3 GHz.

These alternative models offer different frequency ranges to cater to specific application requirements.

Word count: 322 words

기술 솔루션에 8N3SV75BC-0100CDI8 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of 8N3SV75BC-0100CDI8 in technical solutions:

  1. Question: What is the 8N3SV75BC-0100CDI8?
    Answer: The 8N3SV75BC-0100CDI8 is a specific model of integrated circuit (IC) used in technical solutions.

  2. Question: What is the purpose of the 8N3SV75BC-0100CDI8?
    Answer: The 8N3SV75BC-0100CDI8 is designed to perform specific functions within a technical solution, such as voltage regulation or signal conditioning.

  3. Question: What are the key features of the 8N3SV75BC-0100CDI8?
    Answer: Some key features of the 8N3SV75BC-0100CDI8 may include high efficiency, low power consumption, small form factor, and built-in protection mechanisms.

  4. Question: In which applications can the 8N3SV75BC-0100CDI8 be used?
    Answer: The 8N3SV75BC-0100CDI8 can be used in various applications, including power management systems, industrial automation, consumer electronics, and telecommunications.

  5. Question: What is the input voltage range supported by the 8N3SV75BC-0100CDI8?
    Answer: The 8N3SV75BC-0100CDI8 typically supports an input voltage range of X volts to Y volts, where X and Y are specific values mentioned in the datasheet.

  6. Question: What is the output voltage range provided by the 8N3SV75BC-0100CDI8?
    Answer: The 8N3SV75BC-0100CDI8 can provide an output voltage range of A volts to B volts, as specified in the datasheet.

  7. Question: Does the 8N3SV75BC-0100CDI8 have any built-in protection features?
    Answer: Yes, the 8N3SV75BC-0100CDI8 may include built-in protection mechanisms such as overvoltage protection, overcurrent protection, and thermal shutdown.

  8. Question: What is the typical efficiency of the 8N3SV75BC-0100CDI8?
    Answer: The typical efficiency of the 8N3SV75BC-0100CDI8 is usually mentioned in the datasheet and can vary depending on the operating conditions.

  9. Question: Can the 8N3SV75BC-0100CDI8 be used in both AC and DC applications?
    Answer: The 8N3SV75BC-0100CDI8 is typically designed for DC applications, but it may also be compatible with certain AC applications depending on the specific requirements.

  10. Question: Are there any recommended external components or circuitry to use with the 8N3SV75BC-0100CDI8?
    Answer: The datasheet of the 8N3SV75BC-0100CDI8 usually provides recommendations for external components or circuitry that can optimize its performance and ensure proper operation.