IDT, Integrated Device Technology Inc
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
IDT5V993A-5QGI
자세히보기 데이터시트

IDT5V993A-5QGI

Product Overview

Category

The IDT5V993A-5QGI belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for voltage level translation in various electronic devices and systems.

Characteristics

  • Voltage level translation capability
  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compact package size

Package

The IDT5V993A-5QGI is available in a small form factor package, typically a quad flat no-leads (QFN) package.

Essence

The essence of the IDT5V993A-5QGI lies in its ability to efficiently translate voltage levels between different logic families, enabling seamless communication between incompatible devices.

Packaging/Quantity

The IC is usually packaged in reels or trays, with a typical quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 1.2V - 3.6V
  • Logic Voltage Levels: 1.8V / 2.5V / 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Input/Output Compatibility: CMOS, TTL, LVCMOS, LVTTL

Detailed Pin Configuration

The IDT5V993A-5QGI has a total of 20 pins, which are assigned specific functions as follows:

  1. VCCA - Power supply voltage for side A
  2. GND - Ground reference for side A
  3. OE - Output enable control input
  4. A1 - Data input/output pin 1
  5. B1 - Data input/output pin 2
  6. A2 - Data input/output pin 3
  7. B2 - Data input/output pin 4
  8. A3 - Data input/output pin 5
  9. B3 - Data input/output pin 6
  10. A4 - Data input/output pin 7
  11. B4 - Data input/output pin 8
  12. VCCB - Power supply voltage for side B
  13. GND - Ground reference for side B
  14. NC - No connection
  15. A5 - Data input/output pin 9
  16. B5 - Data input/output pin 10
  17. A6 - Data input/output pin 11
  18. B6 - Data input/output pin 12
  19. A7 - Data input/output pin 13
  20. B7 - Data input/output pin 14

Functional Features

  • Bidirectional voltage level translation
  • Automatic direction sensing
  • High-speed data transmission
  • Low power consumption
  • ESD protection on all pins

Advantages and Disadvantages

Advantages

  • Wide operating voltage range allows compatibility with various logic families
  • Compact package size enables space-saving integration
  • Automatic direction sensing simplifies system design
  • ESD protection ensures robustness against electrostatic discharge

Disadvantages

  • Limited number of available voltage levels for translation
  • May not support certain specialized logic families

Working Principles

The IDT5V993A-5QGI utilizes a combination of level-shifting circuitry and automatic direction sensing to translate voltage levels between different logic families. When an input signal is detected, the IC automatically determines the required voltage translation direction and performs the necessary level shifting to ensure proper communication between devices.

Detailed Application Field Plans

The IDT5V993A-5QGI finds applications in various electronic systems, including but not limited to: - Microcontrollers and microprocessors - Communication interfaces (UART, SPI, I2C) - Memory modules - Industrial automation systems - Consumer electronics

Detailed and Complete Alternative Models

  • IDT5V993A-4QGI
  • IDT5V993A-6QGI
  • IDT5V993A-8QGI
  • IDT5V993A-10QGI
  • IDT5V993A-12QGI

These alternative models offer similar functionality and characteristics, but with varying pin counts to accommodate different system requirements.

Word count: 436 words

기술 솔루션에 IDT5V993A-5QGI 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of IDT5V993A-5QGI in technical solutions:

  1. Question: What is the IDT5V993A-5QGI?
    Answer: The IDT5V993A-5QGI is a high-performance clock generator designed for use in various technical solutions.

  2. Question: What are the key features of the IDT5V993A-5QGI?
    Answer: Some key features include low jitter, multiple outputs, programmable frequencies, and wide operating temperature range.

  3. Question: In what applications can the IDT5V993A-5QGI be used?
    Answer: It can be used in applications such as telecommunications, networking, data centers, industrial automation, and test and measurement equipment.

  4. Question: How many outputs does the IDT5V993A-5QGI have?
    Answer: It has up to 12 differential outputs, which can be programmed to different frequencies.

  5. Question: Can the IDT5V993A-5QGI generate different types of clock signals?
    Answer: Yes, it can generate various types of clock signals, including LVPECL, LVDS, HCSL, and CML.

  6. Question: Is the IDT5V993A-5QGI compatible with different supply voltages?
    Answer: Yes, it supports a wide range of supply voltages, typically from 2.5V to 3.3V.

  7. Question: Does the IDT5V993A-5QGI provide any advanced clocking features?
    Answer: Yes, it offers advanced features like spread spectrum modulation, phase-locked loop (PLL) bypass mode, and glitch-free clock switching.

  8. Question: Can the IDT5V993A-5QGI be programmed and controlled?
    Answer: Yes, it can be programmed and controlled through an I2C interface, allowing for easy configuration and customization.

  9. Question: What is the typical jitter performance of the IDT5V993A-5QGI?
    Answer: It has low phase jitter performance, typically in the range of picoseconds (ps).

  10. Question: Is the IDT5V993A-5QGI a reliable and durable component?
    Answer: Yes, it is designed to meet stringent quality and reliability standards, making it suitable for demanding technical solutions.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.