Infineon Technologies
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
IR3082MPBF
자세히보기 데이터시트

IR3082MPBF

Product Overview

Category

IR3082MPBF belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Integrated circuit
  • Voltage regulation
  • Power management

Package

IR3082MPBF is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of IR3082MPBF lies in its ability to regulate voltage and manage power efficiently.

Packaging/Quantity

This product is typically packaged in reels or trays, with varying quantities depending on customer requirements.

Specifications

The specifications of IR3082MPBF are as follows:

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 20A
  • Efficiency: Up to 95%
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The pin configuration of IR3082MPBF is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. FB: Feedback pin for voltage regulation
  4. EN: Enable pin for turning the device on/off
  5. VOUT: Output voltage
  6. COMP: Compensation pin for stability control
  7. SS: Soft-start pin for gradual power-up
  8. PGND: Power ground

Functional Features

The functional features of IR3082MPBF include:

  • Wide input voltage range for versatility
  • High output current capability
  • Excellent efficiency for reduced power loss
  • Adjustable output voltage for flexibility
  • Overcurrent protection for enhanced safety
  • Thermal shutdown protection for temperature management

Advantages and Disadvantages

Advantages: - Wide input voltage range allows compatibility with various power sources - High output current capability enables usage in demanding applications - Excellent efficiency reduces energy waste and heat generation - Adjustable output voltage provides flexibility for different system requirements - Overcurrent and thermal shutdown protection enhance safety and reliability

Disadvantages: - Limited output voltage range may not be suitable for certain specialized applications - Higher cost compared to traditional linear regulators

Working Principles

IR3082MPBF operates based on a switching regulator topology. It utilizes high-frequency switching to convert the input voltage to the desired output voltage efficiently. The integrated control circuitry ensures stable and accurate voltage regulation, while the power MOSFETs handle the high-current switching.

Detailed Application Field Plans

IR3082MPBF finds extensive application in various fields, including:

  1. Computer motherboards: Power management for CPUs, GPUs, and other components.
  2. Telecommunications equipment: Voltage regulation for network devices and base stations.
  3. Industrial automation: Power supply for control systems and motor drives.
  4. Automotive electronics: Voltage regulation for automotive infotainment systems and advanced driver-assistance systems (ADAS).
  5. Consumer electronics: Power management for smartphones, tablets, and gaming consoles.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to IR3082MPBF are:

  1. IR3083MPBF
  2. IR3084MPBF
  3. IR3085MPBF
  4. IR3086MPBF
  5. IR3087MPBF

These models share comparable specifications and features, providing customers with options based on their specific requirements.

Word count: 386 words

기술 솔루션에 IR3082MPBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of IR3082MPBF in technical solutions:

  1. Q: What is IR3082MPBF? A: IR3082MPBF is a specific model of integrated circuit (IC) designed for power management applications.

  2. Q: What are the key features of IR3082MPBF? A: Some key features of IR3082MPBF include high efficiency, low quiescent current, wide input voltage range, and built-in protection mechanisms.

  3. Q: What are the typical applications of IR3082MPBF? A: IR3082MPBF is commonly used in various technical solutions such as DC-DC converters, voltage regulators, battery charging circuits, and power supplies.

  4. Q: What is the maximum input voltage supported by IR3082MPBF? A: The maximum input voltage supported by IR3082MPBF is typically around 36V, but it may vary depending on the specific datasheet and manufacturer recommendations.

  5. Q: Can IR3082MPBF handle high current loads? A: Yes, IR3082MPBF is designed to handle high current loads, typically up to several amps, making it suitable for power-hungry applications.

  6. Q: Does IR3082MPBF require any external components for operation? A: Yes, IR3082MPBF usually requires some external components like capacitors, resistors, and inductors to form a complete power management solution.

  7. Q: Is IR3082MPBF compatible with both analog and digital control schemes? A: Yes, IR3082MPBF supports both analog and digital control schemes, providing flexibility in system design and integration.

  8. Q: Are there any specific thermal considerations for IR3082MPBF? A: Yes, like any power management IC, IR3082MPBF generates heat during operation. Adequate thermal management, such as proper heatsinking or airflow, is necessary to ensure reliable performance.

  9. Q: Can IR3082MPBF operate in a wide temperature range? A: Yes, IR3082MPBF is typically designed to operate within a wide temperature range, often from -40°C to 125°C, but it's important to refer to the datasheet for specific temperature specifications.

  10. Q: Are there any recommended reference designs or evaluation boards available for IR3082MPBF? A: Yes, many manufacturers provide reference designs and evaluation boards for IR3082MPBF, which can help engineers quickly prototype and evaluate its performance in different applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer recommendations for IR3082MPBF.