10CX105YU484I6G

Basic Information Overview

• Category: Electronic Component
• Use: Integrated Circuit (IC)
• Characteristics: High-performance, multi-functional
• Package: 484-pin BGA (Ball Grid Array)
• Essence: Microchip for electronic devices
• Packaging/Quantity: Individually packaged, typically sold in reels or trays

Specifications

• Model: 10CX105YU484I6G
• Package Type: BGA
• Pin Count: 484
• Operating Temperature Range: -40°C to +85°C
• Supply Voltage: 3.3V
• Maximum Clock Frequency: 500 MHz
• Memory Capacity: 10 Megabits
• Data Bus Width: 16 bits
• Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

The 10CX105YU484I6G IC has a total of 484 pins arranged in a Ball Grid Array package. The pin configuration is as follows:

1. VDD (Power Supply)
2. GND (Ground)
3. CLK (Clock Input)
4. RESET (Reset Input)
5. CS (Chip Select)
6. MOSI (Master Output Slave Input)
7. MISO (Master Input Slave Output)
8. SCK (Serial Clock)
9. A0-A9 (Address Inputs)
10. DQ0-DQ15 (Data Inputs/Outputs)
11. WP (Write Protect)
12. HOLD (Hold Input)
13. INT (Interrupt Output)
14. NC (No Connection)

(Note: This is a simplified representation of the pin configuration. The actual IC may have additional pins and functionalities.)

Functional Features

• High-speed data transfer with SPI interface
• Built-in memory for storing data
• Reset and interrupt capabilities
• Write protection and hold functionality
• Wide operating temperature range for versatile applications

Advantages and Disadvantages

Advantages: - High-performance and reliable operation - Compact size and high integration - Versatile functionality for various applications - Wide operating temperature range

Disadvantages: - Complex pin configuration may require careful handling during assembly - Limited memory capacity compared to some alternative models

Working Principles

The 10CX105YU484I6G IC operates based on the Serial Peripheral Interface (SPI) protocol. It communicates with a microcontroller or other devices using a serial clock, data input/output lines, and control signals. The IC can store and retrieve data from its built-in memory, perform various operations based on received commands, and provide interrupt signals when necessary.

Detailed Application Field Plans

The 10CX105YU484I6G IC finds applications in various electronic devices and systems, including but not limited to: - Communication equipment - Industrial automation - Automotive electronics - Consumer electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

1. 10CX105YU484I6F: Similar to 10CX105YU484I6G, but with extended temperature range (-40°C to +125°C).
2. 10CX105YU256I6G: A lower-pin-count variant with 256 pins, suitable for space-constrained designs.
3. 10CX105YU484I8G: Higher memory capacity version with 8 Megabits.

(Note: This is a sample list of alternative models. There may be more options available from different manufacturers.)

This entry provides an overview of the 10CX105YU484I6G integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.