Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
HIN232EIBN-T
자세히보기 데이터시트

HIN232EIBN-T

Product Overview

Category

HIN232EIBN-T belongs to the category of integrated circuits (ICs) specifically designed for RS-232 communication.

Use

This product is commonly used in electronic devices that require serial communication, such as computers, modems, and industrial control systems.

Characteristics

  • Supports RS-232 voltage levels
  • Provides signal conversion between RS-232 and TTL/CMOS logic levels
  • Operates with a single power supply ranging from 3.0V to 5.5V
  • Offers high data rate capability up to 120kbps
  • Includes four drivers and four receivers

Package

HIN232EIBN-T is available in an industry-standard 16-pin plastic dual in-line package (PDIP).

Essence

The essence of HIN232EIBN-T lies in its ability to facilitate reliable and efficient communication between devices operating at different voltage levels.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 120kbps
  • Number of Drivers: 4
  • Number of Receivers: 4
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: PDIP-16

Detailed Pin Configuration

  1. VCC - Power supply voltage
  2. GND - Ground reference
  3. T1OUT - Transmitter 1 output
  4. R1IN - Receiver 1 input
  5. R1OUT - Receiver 1 output
  6. T1IN - Transmitter 1 input
  7. T2IN - Transmitter 2 input
  8. R2OUT - Receiver 2 output
  9. R2IN - Receiver 2 input
  10. T2OUT - Transmitter 2 output
  11. T3OUT - Transmitter 3 output
  12. R3IN - Receiver 3 input
  13. R3OUT - Receiver 3 output
  14. T3IN - Transmitter 3 input
  15. T4IN - Transmitter 4 input
  16. R4OUT - Receiver 4 output

Functional Features

  • Voltage level conversion between RS-232 and TTL/CMOS logic levels
  • Protection against electrostatic discharge (ESD)
  • Low power consumption
  • High noise immunity
  • Wide operating voltage range

Advantages and Disadvantages

Advantages

  • Supports a wide range of operating voltages
  • Provides reliable signal conversion for RS-232 communication
  • Offers protection against ESD
  • Low power consumption enhances energy efficiency

Disadvantages

  • Limited to four drivers and receivers
  • May require additional components for complete RS-232 implementation

Working Principles

HIN232EIBN-T utilizes internal charge pumps to generate the necessary voltage levels required for RS-232 communication. It converts TTL/CMOS logic levels to RS-232 voltage levels, allowing seamless data transmission between devices with different voltage requirements.

Detailed Application Field Plans

HIN232EIBN-T finds applications in various fields, including: 1. Computer hardware interfaces 2. Modems and networking equipment 3. Industrial automation and control systems 4. Medical devices 5. Consumer electronics

Detailed and Complete Alternative Models

  1. MAX232 - Manufactured by Maxim Integrated, this IC offers similar functionality to HIN232EIBN-T.
  2. SP3232 - Produced by Exar Corporation, this IC is another alternative with comparable features.
  3. LTC1380 - A product from Linear Technology, it provides RS-232 level conversion with additional features.

These alternative models can be considered based on specific application requirements and availability.

Word count: 496 words

기술 솔루션에 HIN232EIBN-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of HIN232EIBN-T in technical solutions:

  1. Q: What is HIN232EIBN-T? A: HIN232EIBN-T is a RS-232 transceiver IC (integrated circuit) that converts TTL/CMOS logic levels to RS-232 voltage levels.

  2. Q: What is the purpose of using HIN232EIBN-T in technical solutions? A: HIN232EIBN-T is commonly used to interface microcontrollers, microprocessors, or other digital devices with RS-232 communication ports found in various industrial and communication systems.

  3. Q: How many channels does HIN232EIBN-T support? A: HIN232EIBN-T supports two independent RS-232 channels, allowing bidirectional communication on each channel.

  4. Q: What is the operating voltage range of HIN232EIBN-T? A: HIN232EIBN-T operates within a voltage range of 4.5V to 5.5V, making it compatible with standard TTL/CMOS logic levels.

  5. Q: Can HIN232EIBN-T handle high-speed data transmission? A: Yes, HIN232EIBN-T is capable of supporting data rates up to 120 kbps, making it suitable for most standard RS-232 applications.

  6. Q: Does HIN232EIBN-T require external capacitors? A: Yes, HIN232EIBN-T requires four external capacitors (0.1µF) for charge pump operation and voltage conversion.

  7. Q: Is HIN232EIBN-T compatible with both 3.3V and 5V logic levels? A: No, HIN232EIBN-T is designed to work with 5V logic levels. For 3.3V systems, a level shifter or voltage translator may be required.

  8. Q: Can HIN232EIBN-T handle long-distance communication? A: Yes, HIN232EIBN-T can support communication over longer distances (up to 50 feet) by using RS-232 standard voltage levels.

  9. Q: Does HIN232EIBN-T provide any protection against electrostatic discharge (ESD)? A: Yes, HIN232EIBN-T incorporates ESD protection on all pins, providing robustness against ESD events.

  10. Q: Are there any application notes or reference designs available for HIN232EIBN-T? A: Yes, the manufacturer of HIN232EIBN-T typically provides application notes and reference designs that can help in implementing the IC in various technical solutions. These resources can be found on their website or datasheet.