Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ISL3179EIUZ
자세히보기 데이터시트

ISL3179EIUZ

Product Overview

Category: Integrated Circuit (IC)

Use: ISL3179EIUZ is a high-speed, differential line transceiver designed for use in industrial automation and control systems. It provides robust communication over long distances in noisy environments.

Characteristics: - High-speed data transmission - Differential signaling for noise immunity - Wide operating voltage range - Low power consumption - Industrial-grade temperature range (-40°C to +85°C) - ESD protection

Package: The ISL3179EIUZ comes in a small outline integrated circuit (SOIC) package.

Essence: The essence of the ISL3179EIUZ is its ability to enable reliable and efficient communication in industrial automation and control systems.

Packaging/Quantity: The ISL3179EIUZ is typically sold in reels containing 2500 units.

Specifications

  • Supply Voltage Range: 3V to 5.5V
  • Data Rate: Up to 40 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • ESD Protection: ±15kV (Human Body Model)
  • Common Mode Voltage Range: -7V to +12V
  • Quiescent Current: 1.6mA (typical)

Detailed Pin Configuration

The ISL3179EIUZ has a total of 8 pins:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. RO: Receiver output
  4. RE: Receiver enable
  5. DE: Driver enable
  6. DI: Driver input
  7. VREF: Reference voltage
  8. RS: Receiver input

Functional Features

  • Robust differential signaling for noise immunity
  • Receiver hysteresis for improved noise rejection
  • Driver output short-circuit protection
  • Receiver input failsafe protection
  • Low power consumption in standby mode

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Wide operating voltage range allows compatibility with various systems - Robust communication in noisy industrial environments - ESD protection ensures device reliability - Low power consumption for energy efficiency

Disadvantages: - Limited data rate compared to some other high-speed transceivers - Requires external components for complete functionality

Working Principles

The ISL3179EIUZ operates on the principle of differential signaling, where data is transmitted as the difference between two complementary signals. This technique provides excellent noise immunity, allowing reliable communication over long distances in industrial environments.

The driver section of the IC converts the digital input signal into a differential output, while the receiver section converts the received differential signal back into a digital output. The IC also incorporates various protection features to ensure reliable operation in harsh conditions.

Detailed Application Field Plans

The ISL3179EIUZ is widely used in industrial automation and control systems, including:

  1. Factory automation
  2. Process control systems
  3. Building management systems
  4. Motor control systems
  5. Robotics
  6. HVAC (Heating, Ventilation, and Air Conditioning) systems

Detailed and Complete Alternative Models

  1. SN65HVD178D: High-Speed CAN Transceiver
  2. MAX485E: RS-485/RS-422 Transceiver
  3. LTC2874: Multiprotocol Transceiver
  4. ADM2587E: Isolated RS-485 Transceiver
  5. TJA1050: CAN Bus Transceiver

These alternative models offer similar functionality and can be considered as alternatives to the ISL3179EIUZ based on specific application requirements.

Word count: 452 words

기술 솔루션에 ISL3179EIUZ 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ISL3179EIUZ in technical solutions:

  1. Q: What is ISL3179EIUZ? A: ISL3179EIUZ is a high-speed, differential line transceiver commonly used in industrial automation, process control, and other technical applications.

  2. Q: What is the maximum data rate supported by ISL3179EIUZ? A: ISL3179EIUZ supports data rates up to 40 Mbps, making it suitable for high-speed communication requirements.

  3. Q: Can ISL3179EIUZ be used in both half-duplex and full-duplex modes? A: Yes, ISL3179EIUZ can operate in both half-duplex and full-duplex modes, providing flexibility in various communication setups.

  4. Q: What is the operating voltage range of ISL3179EIUZ? A: ISL3179EIUZ operates within a voltage range of 3V to 5.5V, allowing compatibility with a wide range of power supply systems.

  5. Q: Does ISL3179EIUZ support fail-safe biasing? A: Yes, ISL3179EIUZ incorporates fail-safe biasing, ensuring that the receiver outputs remain in a known state when the inputs are open or shorted.

  6. Q: Can ISL3179EIUZ handle long cable lengths? A: Yes, ISL3179EIUZ has excellent noise immunity and can handle cable lengths up to several hundred meters, depending on the data rate and cable quality.

  7. Q: Is ISL3179EIUZ compatible with RS-485 and RS-422 standards? A: Yes, ISL3179EIUZ is fully compliant with both RS-485 and RS-422 standards, making it suitable for various industrial communication protocols.

  8. Q: Does ISL3179EIUZ support hot-swapping of devices? A: Yes, ISL3179EIUZ features a high-impedance receiver input during power-up and power-down, allowing for hot-swapping of devices without causing bus contention.

  9. Q: Can ISL3179EIUZ be used in harsh environments? A: Yes, ISL3179EIUZ is designed to operate in harsh industrial environments, with a wide operating temperature range and robust ESD protection.

  10. Q: Are there any evaluation boards or reference designs available for ISL3179EIUZ? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for ISL3179EIUZ, which can help in the development and testing of technical solutions.

Please note that these answers are general and may vary depending on specific application requirements.