Intersil
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
X9400WS24IZT1
자세히보기 데이터시트

X9400WS24IZT1

Product Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics:
    • High precision and resolution
    • Wide operating voltage range
    • Non-volatile memory for storing settings
    • Serial interface for easy control
  • Package: WSOP-24
  • Essence: X9400WS24IZT1 is a digital potentiometer designed for precise and flexible resistance adjustment in electronic circuits.
  • Packaging/Quantity: Each package contains one X9400WS24IZT1 digital potentiometer.

Specifications

  • Resistance Range: 0Ω to 100kΩ
  • Resolution: 256 steps
  • Operating Voltage Range: 2.7V to 5.5V
  • Interface: Serial (SPI)
  • Temperature Range: -40°C to +85°C
  • Power Supply: Single supply, 2.7V to 5.5V
  • Package Type: WSOP-24

Detailed Pin Configuration

The X9400WS24IZT1 digital potentiometer has the following pin configuration:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. CS: Chip select input
  4. SCK: Serial clock input
  5. SI: Serial data input
  6. SO: Serial data output
  7. WP: Write protect input
  8. H/L: High/Low terminal of the resistor element
  9. RH: Terminal of the resistor element
  10. RL: Terminal of the resistor element
  11. RH: Terminal of the resistor element
  12. RL: Terminal of the resistor element
  13. RH: Terminal of the resistor element
  14. RL: Terminal of the resistor element
  15. RH: Terminal of the resistor element
  16. RL: Terminal of the resistor element
  17. RH: Terminal of the resistor element
  18. RL: Terminal of the resistor element
  19. RH: Terminal of the resistor element
  20. RL: Terminal of the resistor element
  21. RH: Terminal of the resistor element
  22. RL: Terminal of the resistor element
  23. RH: Terminal of the resistor element
  24. RL: Terminal of the resistor element

Functional Features

  • Precise resistance adjustment with 256 steps resolution
  • Non-volatile memory for storing settings, ensuring retention even when power is disconnected
  • Serial interface (SPI) for easy control and integration into digital systems
  • Wide operating voltage range allows compatibility with various power supply configurations
  • High precision and accuracy for reliable performance in demanding applications

Advantages and Disadvantages

Advantages: - High precision and resolution - Non-volatile memory for retaining settings - Flexible resistance adjustment - Easy integration with digital systems

Disadvantages: - Limited resistance range (0Ω to 100kΩ) - Requires a serial interface for control

Working Principles

The X9400WS24IZT1 digital potentiometer operates by adjusting the resistance between its high (RH) and low (RL) terminals. This adjustment is achieved through a series of internal switches that connect or disconnect segments of the resistor element. The resistance value is controlled digitally using the serial interface, allowing precise and flexible adjustment.

Detailed Application Field Plans

The X9400WS24IZT1 digital potentiometer finds applications in various electronic systems where precise resistance adjustment is required. Some potential application fields include:

  1. Audio Equipment: Used for volume control and tone adjustment in amplifiers, mixers, and audio processors.
  2. Industrial Control Systems: Employed in process control systems for precise calibration and adjustment of sensors, actuators, and feedback loops.
  3. Test and Measurement Instruments: Integrated into test equipment to provide programmable resistance for calibration and simulation purposes.
  4. Communication Systems: Used in signal conditioning circuits for impedance matching and gain control in RF amplifiers and filters.
  5. Automotive Electronics: Incorporated into automotive control modules for fine-tuning sensor inputs and actuator outputs.

Detailed and Complete Alternative Models

  1. X9400WS24IZT2: Similar to X9400WS24IZT1 but with extended resistance range (0Ω to 200kΩ).
  2. X9400WS24IZT3: Higher resolution version of X9400WS24IZT1 with 1024 steps.
  3. X9400WS24IZT4: Digital potentiometer with logarithmic taper for audio applications.
  4. X9400WS24IZT5: Low-power variant of X9400WS24IZT1 with reduced operating voltage range (1.8V to 3.6V).

These alternative models offer different specifications and features to cater to specific application

기술 솔루션에 X9400WS24IZT1 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of X9400WS24IZT1 in technical solutions:

Q1: What is the X9400WS24IZT1? A1: The X9400WS24IZT1 is a high-performance network switch designed for data center and enterprise networks.

Q2: What are the key features of the X9400WS24IZT1? A2: The X9400WS24IZT1 offers advanced features such as high port density, high bandwidth, low latency, and support for various network protocols.

Q3: What is the maximum port density of the X9400WS24IZT1? A3: The X9400WS24IZT1 has a maximum port density of 24 ports.

Q4: What is the maximum bandwidth supported by the X9400WS24IZT1? A4: The X9400WS24IZT1 supports a maximum bandwidth of 10 Gigabits per second (Gbps) per port.

Q5: Can the X9400WS24IZT1 be used in a data center environment? A5: Yes, the X9400WS24IZT1 is specifically designed for data center environments and can handle high traffic loads.

Q6: Does the X9400WS24IZT1 support Power over Ethernet (PoE)? A6: No, the X9400WS24IZT1 does not support PoE. It is a non-PoE switch.

Q7: What network protocols does the X9400WS24IZT1 support? A7: The X9400WS24IZT1 supports various network protocols such as Ethernet, VLAN, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP).

Q8: Can the X9400WS24IZT1 be managed remotely? A8: Yes, the X9400WS24IZT1 can be managed remotely using network management protocols such as SNMP (Simple Network Management Protocol) and SSH (Secure Shell).

Q9: Is the X9400WS24IZT1 compatible with other networking equipment? A9: Yes, the X9400WS24IZT1 is compatible with other networking equipment that supports standard Ethernet protocols.

Q10: What are some typical use cases for the X9400WS24IZT1? A10: The X9400WS24IZT1 is commonly used in data centers, enterprise networks, server farms, and high-performance computing environments where high bandwidth and low latency are required.

Please note that the specific details and capabilities of the X9400WS24IZT1 may vary, so it's always recommended to refer to the product documentation or consult with the manufacturer for accurate information.