이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
IS25WP128-RMLE-TR

IS25WP128-RMLE-TR

Product Overview

Category

IS25WP128-RMLE-TR belongs to the category of Serial NOR Flash Memory.

Use

It is primarily used for storing and retrieving data in electronic devices such as microcontrollers, digital cameras, and automotive systems.

Characteristics

  • Non-volatile memory: Retains data even when power is turned off.
  • High-speed read and write operations: Enables fast data access.
  • Small form factor: Compact size suitable for space-constrained applications.
  • Low power consumption: Optimized for energy-efficient operation.
  • Wide temperature range: Can operate reliably in extreme temperature conditions.

Package

IS25WP128-RMLE-TR is available in a standard 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of IS25WP128-RMLE-TR lies in its ability to provide reliable and high-performance non-volatile memory storage for various electronic devices.

Packaging/Quantity

Each package of IS25WP128-RMLE-TR contains one unit of the Serial NOR Flash Memory.

Specifications

  • Memory Capacity: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycles: Up to 100,000 cycles

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • Fast Read Operation: Allows high-speed data retrieval.
  • Page Program Operation: Enables efficient programming of data in page mode.
  • Sector Erase Operation: Facilitates erasing of large memory sectors.
  • Chip Erase Operation: Allows erasing of the entire memory chip.
  • Write Protection: Provides a hardware-based write protection mechanism.
  • Deep Power-down Mode: Reduces power consumption during idle periods.

Advantages and Disadvantages

Advantages

  • High-speed read and write operations enhance overall system performance.
  • Non-volatile memory ensures data retention even in the absence of power.
  • Compact size makes it suitable for space-constrained applications.
  • Low power consumption prolongs battery life in portable devices.
  • Wide temperature range enables reliable operation in various environments.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively higher cost per unit compared to alternative memory options.

Working Principles

IS25WP128-RMLE-TR utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The memory can be accessed by sending commands through the SPI interface, allowing for high-speed read and write operations.

Detailed Application Field Plans

IS25WP128-RMLE-TR finds application in various electronic devices, including but not limited to: - Microcontrollers and embedded systems - Digital cameras and imaging devices - Automotive systems and infotainment units - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

  1. IS25LP128-JBLE-TR: Similar specifications with enhanced performance.
  2. MX25L12835FZNI-10G: Higher storage capacity with comparable features.
  3. S25FL128SAGMFI001: Advanced security features with similar functionality.

These alternative models offer similar functionalities to IS25WP128-RMLE-TR while providing additional features or different specifications to cater to specific application requirements.

Word count: 520 words

기술 솔루션에 IS25WP128-RMLE-TR 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of IS25WP128-RMLE-TR in technical solutions:

  1. Question: What is the capacity of the IS25WP128-RMLE-TR?
    Answer: The IS25WP128-RMLE-TR has a capacity of 128 megabits (16 megabytes).

  2. Question: What is the operating voltage range for this flash memory?
    Answer: The operating voltage range for the IS25WP128-RMLE-TR is typically between 2.7V and 3.6V.

  3. Question: Can I use this flash memory in industrial applications?
    Answer: Yes, the IS25WP128-RMLE-TR is suitable for industrial applications due to its wide temperature range and reliability.

  4. Question: Does this flash memory support SPI interface?
    Answer: Yes, the IS25WP128-RMLE-TR supports the Serial Peripheral Interface (SPI) for easy integration into various systems.

  5. Question: What is the maximum clock frequency supported by this flash memory?
    Answer: The IS25WP128-RMLE-TR can operate at a maximum clock frequency of 104 MHz.

  6. Question: Is this flash memory compatible with both 3.3V and 5V logic levels?
    Answer: No, the IS25WP128-RMLE-TR is designed for 3.3V logic level operation only.

  7. Question: Can I perform in-system programming on this flash memory?
    Answer: Yes, the IS25WP128-RMLE-TR supports in-system programming (ISP) for convenient firmware updates.

  8. Question: What is the typical data retention period for this flash memory?
    Answer: The IS25WP128-RMLE-TR has a typical data retention period of 20 years.

  9. Question: Does this flash memory have built-in hardware or software write protection?
    Answer: Yes, the IS25WP128-RMLE-TR provides both hardware and software write protection features for data security.

  10. Question: Can I use this flash memory in automotive applications?
    Answer: Yes, the IS25WP128-RMLE-TR is suitable for automotive applications as it meets the necessary quality and reliability standards.

Please note that these answers are based on general information about the IS25WP128-RMLE-TR flash memory. For specific technical details and application requirements, it is recommended to refer to the manufacturer's datasheet or consult with a technical expert.