Linear Technology/QD Devices
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
LTC4419CMSE#PBF
자세히보기 데이터시트

LTC4419CMSE#PBF

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High voltage ideal diode controller - Low quiescent current - Wide input voltage range - Reverse input protection - Overvoltage protection - Undervoltage lockout - Fault flag output - Small footprint

Package: MSOP-10E

Essence: The LTC4419CMSE#PBF is an integrated circuit that serves as a high voltage ideal diode controller. It provides reverse input protection, overvoltage protection, and undervoltage lockout features.

Packaging/Quantity: The LTC4419CMSE#PBF is available in a MSOP-10E package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.5V to 36V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 20µA
  • Fault Flag Output Voltage: 1.2V
  • Reverse Input Protection Threshold: 50mV
  • Overvoltage Protection Threshold: 36.5V
  • Undervoltage Lockout Threshold: 2.3V

Pin Configuration

The LTC4419CMSE#PBF has the following pin configuration:

  1. GATE: Gate Drive Output
  2. VIN: Input Voltage
  3. VOUT: Output Voltage
  4. FLT: Fault Flag Output
  5. GND: Ground
  6. GND: Ground
  7. GND: Ground
  8. GND: Ground
  9. GND: Ground
  10. GND: Ground

Functional Features

  1. High Voltage Ideal Diode Controller: The LTC4419CMSE#PBF acts as a high voltage ideal diode controller, allowing for seamless power switching between multiple input sources.
  2. Reverse Input Protection: It provides reverse input protection, preventing damage to the circuit in case of reverse polarity connection.
  3. Overvoltage Protection: The IC offers overvoltage protection by monitoring the input voltage and disconnecting the load when it exceeds the set threshold.
  4. Undervoltage Lockout: It includes undervoltage lockout functionality, ensuring that the load is disconnected when the input voltage falls below the specified threshold.
  5. Fault Flag Output: The fault flag output pin indicates the status of the device, providing a signal when any fault condition occurs.

Advantages and Disadvantages

Advantages: - Provides reverse input protection - Offers overvoltage and undervoltage protection - Low quiescent current consumption - Small footprint package - Fault flag output for easy monitoring

Disadvantages: - Limited to a maximum input voltage of 36V - Requires external components for complete power management solution

Working Principles

The LTC4419CMSE#PBF operates by controlling an external N-channel MOSFET to emulate an ideal diode behavior. It monitors the input voltage and compares it with the reference voltages for reverse input protection, overvoltage protection, and undervoltage lockout. When a fault condition is detected, the gate drive output is adjusted to turn off the MOSFET, disconnecting the load from the input source.

Detailed Application Field Plans

The LTC4419CMSE#PBF can be used in various applications where power management and protection are crucial. Some potential application fields include:

  1. Battery-powered devices: The IC can be utilized in portable electronic devices to protect against reverse polarity connection and provide overvoltage/undervoltage protection.
  2. Automotive systems: It can be employed in automotive applications to protect sensitive electronic components from reverse polarity and voltage spikes.
  3. Industrial equipment: The LTC4419CMSE#PBF can be integrated into industrial machinery to ensure reliable power supply and protect against input voltage fluctuations.

Detailed and Complete Alternative Models

  1. LTC4418: Similar to the LTC4419CMSE#PBF, it is a high voltage ideal diode controller with reverse input protection and overvoltage/undervoltage lockout features. It comes in a different package (DFN-10) and has slightly different specifications.
  2. LTC4357: This IC offers similar functionality but includes additional features such as adjustable current limit and thermal shutdown protection. It is available in a TSSOP-16 package.

These alternative models provide similar functionality to the LTC4419CMSE#PBF and can be considered based on specific application requirements.

Word count: 550 words

기술 솔루션에 LTC4419CMSE#PBF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of LTC4419CMSE#PBF in technical solutions:

  1. Q: What is LTC4419CMSE#PBF? A: LTC4419CMSE#PBF is a power management IC (integrated circuit) designed for power path control, ideal diode operation, and load sharing in various applications.

  2. Q: What are the key features of LTC4419CMSE#PBF? A: Some key features include low voltage drop, reverse current blocking, adjustable current limit, fault flag output, and thermal shutdown protection.

  3. Q: How does LTC4419CMSE#PBF enable power path control? A: LTC4419CMSE#PBF allows seamless switching between two power sources, such as a battery and a wall adapter, by prioritizing the higher voltage source while blocking reverse current flow.

  4. Q: Can LTC4419CMSE#PBF be used for load sharing between multiple power sources? A: Yes, LTC4419CMSE#PBF supports load sharing, allowing multiple power sources to contribute to the load current based on their available capacity.

  5. Q: Is it possible to adjust the current limit of LTC4419CMSE#PBF? A: Yes, LTC4419CMSE#PBF provides an adjustable current limit feature, allowing users to set the maximum current that can flow through the device.

  6. Q: Does LTC4419CMSE#PBF have any built-in protection mechanisms? A: Yes, LTC4419CMSE#PBF incorporates fault flag output and thermal shutdown protection to safeguard against overcurrent, overtemperature, and other potential issues.

  7. Q: What is the typical voltage drop across LTC4419CMSE#PBF? A: The typical voltage drop is very low, usually in the range of a few millivolts, ensuring efficient power transfer.

  8. Q: Can LTC4419CMSE#PBF be used in automotive applications? A: Yes, LTC4419CMSE#PBF is suitable for automotive applications due to its wide input voltage range and robust protection features.

  9. Q: What are some common applications of LTC4419CMSE#PBF? A: LTC4419CMSE#PBF finds applications in battery-powered systems, portable devices, industrial equipment, medical devices, and other electronic systems requiring power path control.

  10. Q: Where can I find more information about LTC4419CMSE#PBF? A: You can refer to the datasheet and application notes provided by the manufacturer or visit their official website for detailed information on LTC4419CMSE#PBF's specifications, usage guidelines, and design considerations.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and the context of the application.