Macronix
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MX25L6406EM2I-12GF
자세히보기 데이터시트

MX25L6406EM2I-12GF

Product Overview

Category

The MX25L6406EM2I-12GF belongs to the category of serial NOR Flash memory.

Use

It is commonly used for storing program code and data in various electronic devices such as microcontrollers, automotive systems, networking equipment, and consumer electronics.

Characteristics

  • High-speed read operations
  • Low power consumption
  • Wide voltage range
  • Small form factor
  • Reliable data retention

Package

The MX25L6406EM2I-12GF is available in a compact 8-pin SOP package.

Essence

This flash memory device provides non-volatile storage with fast access times, making it suitable for applications requiring reliable and high-performance data storage.

Packaging/Quantity

The MX25L6406EM2I-12GF is typically sold in reels containing multiple units, with specific quantities varying based on customer requirements.

Specifications

  • Capacity: 64Mb
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles per sector

Detailed Pin Configuration

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input/Output (IO0)
  4. Ground (GND)
  5. Serial Data Output/Input (IO1)
  6. Write Protect (/WP)
  7. Hold (HOLD#/RESET#)
  8. Power Supply (VCC)

Functional Features

  • Fast Read Operation: The MX25L6406EM2I-12GF supports high-speed read operations, enabling quick access to stored data.
  • Low Power Consumption: It is designed to minimize power usage, making it suitable for battery-powered devices.
  • Flexible Interface: The SPI interface allows for easy integration with various microcontrollers and other ICs.
  • Reliable Data Retention: The flash memory maintains data integrity over extended periods, ensuring long-term reliability.

Advantages and Disadvantages

Advantages

  • High-speed read operations
  • Low power consumption
  • Compact form factor
  • Wide voltage range support

Disadvantages

  • Limited capacity compared to other storage options
  • Relatively lower write endurance

Working Principles

The MX25L6406EM2I-12GF operates by using a combination of floating gate transistors to store data. When data is written, charge is trapped in the floating gate, altering the transistor's conductive properties. During read operations, the state of each memory cell is determined by sensing the transistor's conductivity, allowing the retrieval of stored data.

Detailed Application Field Plans

The MX25L6406EM2I-12GF is well-suited for use in a wide range of applications, including: - Embedded systems - Automotive electronics - Industrial control systems - Networking devices - Consumer electronics

Detailed and Complete Alternative Models

  • AT25DF641: Similar capacity and interface, offered by Adesto Technologies
  • W25Q64JVSSIQ: Comparable specifications, provided by Winbond Electronics

In conclusion, the MX25L6406EM2I-12GF offers a reliable and efficient solution for non-volatile data storage in various electronic devices, with its high-speed performance, low power consumption, and compact form factor making it a popular choice among designers and engineers.

[Word Count: 498]

기술 솔루션에 MX25L6406EM2I-12GF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the capacity of the MX25L6406EM2I-12GF flash memory?

    • The MX25L6406EM2I-12GF has a capacity of 64 megabits (8 megabytes).

  2. What is the interface type of the MX25L6406EM2I-12GF?

    • It uses a standard SPI (Serial Peripheral Interface) for communication.

  3. What are the typical applications for the MX25L6406EM2I-12GF?

    • It is commonly used in consumer electronics, industrial equipment, networking devices, and automotive applications for storing firmware, configuration data, and other code.

  4. What is the operating voltage range of the MX25L6406EM2I-12GF?

    • It operates within a voltage range of 2.7V to 3.6V.

  5. Does the MX25L6406EM2I-12GF support high-speed read operations?

    • Yes, it supports high-speed clock frequencies for fast read operations.

  6. Can the MX25L6406EM2I-12GF be used for over-the-air (OTA) firmware updates?

    • Yes, it can be utilized for OTA firmware updates in IoT devices and other wireless applications.

  7. Is the MX25L6406EM2I-12GF compatible with industry-standard programming tools?

    • Yes, it is compatible with widely used programming tools and hardware interfaces.

  8. What are the temperature specifications for the MX25L6406EM2I-12GF?

    • It typically operates within a temperature range of -40°C to 85°C.

  9. Does the MX25L6406EM2I-12GF have built-in security features?

    • Yes, it offers various security features such as hardware write protection and software-based locking mechanisms.

  10. Are there any known compatibility issues with microcontrollers or processors when using the MX25L6406EM2I-12GF?

    • Compatibility is generally not an issue, as it is designed to work seamlessly with a wide range of microcontrollers and processors that support SPI flash memory.