The MAX6421XS46+T belongs to the category of integrated circuits (ICs).
This product is primarily used for voltage monitoring and reset functions in electronic devices.
The MAX6421XS46+T is available in a small surface-mount package.
The essence of this product lies in its ability to monitor supply voltages accurately and provide a reset signal when necessary. This ensures the reliable operation of electronic devices.
The MAX6421XS46+T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
The MAX6421XS46+T has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | GND | Ground | | 2 | MR | Manual Reset (active-low) | | 3 | VCC | Supply Voltage Input | | 4 | RESET | Reset Output (active-low) |
The MAX6421XS46+T operates by continuously monitoring the supply voltage connected to its VCC pin. When the voltage falls below the specified threshold, the IC generates an active-low reset signal on the RESET pin. This signal can be used to reset microcontrollers, digital logic circuits, or other components in the system. The manual reset (MR) pin allows for immediate system reset when pulled low.
The MAX6421XS46+T finds application in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Internet of Things (IoT) devices
In consumer electronics, it can be used to monitor and reset power supply voltages in smartphones, tablets, and gaming consoles. In industrial automation, this IC ensures reliable operation by monitoring critical voltage levels in control systems. Automotive applications include monitoring vehicle battery voltage and initiating system resets when necessary. Medical devices benefit from the accurate voltage monitoring and reset capabilities of the MAX6421XS46+T. IoT devices can utilize this IC for power management and system integrity.
Some alternative models that offer similar functionality to the MAX6421XS46+T are:
These alternative models provide flexibility in selecting the appropriate
Sure! Here are 10 common questions and answers related to the application of MAX6421XS46+T in technical solutions:
Q1: What is the MAX6421XS46+T? A1: The MAX6421XS46+T is a voltage monitor and reset circuit that provides power supply monitoring and reset generation for microcontrollers, DSPs, and other digital systems.
Q2: What is the operating voltage range of MAX6421XS46+T? A2: The operating voltage range of MAX6421XS46+T is from 1.6V to 5.5V.
Q3: How many voltage thresholds can be monitored by MAX6421XS46+T? A3: MAX6421XS46+T can monitor two voltage thresholds: VTH1 and VTH2.
Q4: Can MAX6421XS46+T generate a reset signal when the voltage falls below a certain threshold? A4: Yes, MAX6421XS46+T can generate a reset signal when the voltage falls below the programmed threshold.
Q5: What is the typical reset timeout period of MAX6421XS46+T? A5: The typical reset timeout period of MAX6421XS46+T is 140ms.
Q6: Can I adjust the voltage thresholds of MAX6421XS46+T? A6: Yes, the voltage thresholds of MAX6421XS46+T can be adjusted using external resistors.
Q7: Does MAX6421XS46+T have an open-drain output? A7: Yes, MAX6421XS46+T has an open-drain RESET output.
Q8: What is the maximum sink current capability of the RESET output? A8: The maximum sink current capability of the RESET output is 20mA.
Q9: Can MAX6421XS46+T operate in a low-power mode? A9: Yes, MAX6421XS46+T has a low-power mode that reduces the supply current to minimize power consumption.
Q10: Is MAX6421XS46+T available in a small SOT23 package? A10: Yes, MAX6421XS46+T is available in a compact SOT23 package for space-constrained applications.
Please note that these questions and answers are based on general information about MAX6421XS46+T. For specific technical details and application requirements, it is recommended to refer to the datasheet or consult the manufacturer's documentation.