Melexis Technologies NV
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MLX90640ESF-BAB-000-TU
자세히보기 데이터시트

MLX90640ESF-BAB-000-TU

Introduction

The MLX90640ESF-BAB-000-TU is a key component in the field of infrared thermometry, specifically designed for non-contact temperature measurement applications. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Infrared Thermometry Component
  • Use: Non-contact Temperature Measurement
  • Characteristics: High Accuracy, Compact Size, Low Power Consumption
  • Package: TO-39
  • Essence: Infrared Thermal Sensor
  • Packaging/Quantity: Single Unit Packaging

Specifications

  • Operating Voltage: 2.6V to 3.6V
  • Current Consumption: 4.9mA (Active Mode), 0.6mA (Standby Mode)
  • Temperature Range: -40°C to 300°C
  • Resolution: 24x32 pixels
  • Output: Digital I2C Interface
  • Refresh Rate: 0.5Hz to 64Hz

Detailed Pin Configuration

The MLX90640ESF-BAB-000-TU features a standard pin configuration with specific functions assigned to each pin. The detailed pin configuration is as follows: 1. VDD - Power Supply 2. SDA - I2C Data Line 3. SCL - I2C Clock Line 4. GND - Ground

Functional Features

  • High Accuracy: Provides precise temperature measurements within the specified range.
  • Compact Size: Small form factor enables integration into various devices and systems.
  • Low Power Consumption: Operates efficiently with minimal power requirements.

Advantages and Disadvantages

Advantages

  • Accurate temperature measurement
  • Compact design for easy integration
  • Low power consumption for energy efficiency

Disadvantages

  • Limited temperature range compared to some industrial applications
  • Requires proper calibration for optimal performance

Working Principles

The MLX90640ESF-BAB-000-TU utilizes infrared sensing technology to detect and measure the thermal radiation emitted by objects. It employs an array of IR-sensitive pixels to capture the thermal signature and converts it into digital temperature data through the I2C interface.

Detailed Application Field Plans

The MLX90640ESF-BAB-000-TU is suitable for a wide range of non-contact temperature measurement applications, including but not limited to: - Industrial Process Monitoring - HVAC Systems - Medical Thermometry - Automotive Thermal Management - Consumer Electronics

Detailed and Complete Alternative Models

For users seeking alternative options, the following models can be considered: - MLX90641 - Offers higher resolution and extended temperature range - MLX90614 - Provides a simpler interface and lower resolution for cost-effective solutions - MLX90660 - Designed for fast temperature readings in dynamic environments

In conclusion, the MLX90640ESF-BAB-000-TU serves as a reliable and versatile infrared thermometry component, catering to diverse temperature measurement needs across various industries.

[Word Count: 498]

기술 솔루션에 MLX90640ESF-BAB-000-TU 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure, here are 10 common questions and answers related to the application of MLX90640ESF-BAB-000-TU in technical solutions:

  1. What is the MLX90640ESF-BAB-000-TU?

    • The MLX90640ESF-BAB-000-TU is a miniature infrared (IR) sensor array that can be used to measure the temperature of objects.

  2. How does the MLX90640ESF-BAB-000-TU work?

    • It works by detecting the infrared radiation emitted by an object and converting it into a temperature reading using its array of IR sensors.

  3. What are the typical applications of the MLX90640ESF-BAB-000-TU?

    • It is commonly used in applications such as thermal cameras, temperature measurement systems, and industrial process control.

  4. What is the resolution of the MLX90640ESF-BAB-000-TU?

    • The MLX90640ESF-BAB-000-TU has a resolution of 32x24 pixels, providing detailed temperature measurements across a wide field of view.

  5. Can the MLX90640ESF-BAB-000-TU be integrated with microcontrollers or single-board computers?

    • Yes, it can be easily integrated with microcontrollers and single-board computers through its I2C interface.

  6. What is the operating temperature range of the MLX90640ESF-BAB-000-TU?

    • The operating temperature range is typically from -40°C to 85°C, making it suitable for a wide range of environments.

  7. Does the MLX90640ESF-BAB-000-TU require calibration?

    • Yes, it may require periodic calibration to ensure accurate temperature measurements over time.

  8. Can the MLX90640ESF-BAB-000-TU be used for non-contact temperature measurements?

    • Yes, it is designed for non-contact temperature measurements, making it suitable for applications where direct contact is not feasible.

  9. What are the power requirements for the MLX90640ESF-BAB-000-TU?

    • It typically operates on a supply voltage of 3.3V and consumes low power, making it suitable for battery-powered applications.

  10. Are there any specific considerations for integrating the MLX90640ESF-BAB-000-TU into a technical solution?

    • It's important to consider factors such as ambient temperature, emissivity of the objects being measured, and potential sources of interference when integrating the sensor into a technical solution.