이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
24C01C-I/SN

24C01C-I/SN

Product Overview

Category

The 24C01C-I/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The data stored in the 24C01C-I/SN remains even when power is removed.
  • Electrically erasable: The chip allows for easy modification and erasure of stored data.
  • Low power consumption: The 24C01C-I/SN operates on low power, making it suitable for battery-powered devices.
  • High reliability: It offers robust performance and long-term data retention.
  • Small package size: The chip comes in a compact package, enabling space-efficient designs.

Package and Quantity

The 24C01C-I/SN is available in an 8-pin SOIC (Small Outline Integrated Circuit) package. It is typically sold in reels containing multiple units.

Specifications

  • Memory capacity: 1 kilobit (128 bytes)
  • Operating voltage: 2.5V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Write cycle endurance: Up to 1 million write cycles
  • Data retention: Up to 200 years

Pin Configuration

The 24C01C-I/SN has the following pin configuration:

```


| | | 1 2 3 4 | | | | 8 7 6 5 | |_______________| ```

  1. A0: Address input bit 0
  2. A1: Address input bit 1
  3. A2: Address input bit 2
  4. GND: Ground
  5. SDA: Serial data input/output
  6. SCL: Serial clock input
  7. WP: Write protect (optional)
  8. VCC: Power supply

Functional Features

  • Random access: The chip allows for direct read and write operations to specific memory locations.
  • I2C interface: It supports the widely-used I2C (Inter-Integrated Circuit) communication protocol.
  • Hardware write protection: The WP pin can be used to prevent accidental writes to the memory.
  • Page write mode: Enables efficient programming of multiple bytes in a single operation.

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices.
  • High reliability ensures data integrity over extended periods.
  • Easy integration with microcontrollers and other digital systems.
  • Cost-effective solution for non-volatile memory requirements.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to volatile memory types.
  • Vulnerable to electromagnetic interference (EMI) due to its small package size.

Working Principles

The 24C01C-I/SN utilizes EEPROM technology, which allows for electrically erasing and reprogramming of data. It consists of a grid of memory cells that can be individually addressed for reading or writing. When data is written, an electrical charge is stored in each memory cell, representing the desired information. This charge can be later erased and rewritten as needed.

The chip communicates with the host device using the I2C protocol, where the SDA line carries both data and control signals, and the SCL line provides the clock signal for synchronization.

Application Field Plans

The 24C01C-I/SN finds applications in various fields, including:

  1. Embedded systems: Used for storing configuration data, calibration values, and firmware updates in microcontrollers.
  2. Automotive electronics: Employed for storing vehicle settings, mileage data, and security information.
  3. Consumer electronics: Used in devices like smart TVs, set-top boxes, and gaming consoles for storing user preferences and system settings.
  4. Industrial automation: Utilized for storing production data, equipment parameters, and system configurations.

Alternative Models

Several alternative models with similar functionality to the 24C01C-I/SN include:

  1. 24C02C-I/SN: Offers double the memory capacity (2 kilobits) in the same package.
  2. 24C04C-I/SN: Provides four times the memory capacity (4 kilobits) in the same package.
  3. 24C08C-I/SN: Offers eight times the memory capacity (8 kilobits) in the same package.

These alternative models can be chosen based on specific memory requirements of the application.

In conclusion, the 24C01C-I/SN is a compact and reliable EEPROM chip that provides non-volatile data storage capabilities. Its low power consumption,

기술 솔루션에 24C01C-I/SN 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency of 24C01C-I/SN?
    - The maximum clock frequency of 24C01C-I/SN is 400 kHz.

  2. What is the operating voltage range for 24C01C-I/SN?
    - The operating voltage range for 24C01C-I/SN is 1.7V to 5.5V.

  3. Can 24C01C-I/SN be used in automotive applications?
    - Yes, 24C01C-I/SN is suitable for automotive applications.

  4. What is the typical write cycle time for 24C01C-I/SN?
    - The typical write cycle time for 24C01C-I/SN is 5 ms.

  5. Is 24C01C-I/SN compatible with I2C protocol?
    - Yes, 24C01C-I/SN is compatible with I2C protocol.

  6. What is the maximum data retention period for 24C01C-I/SN?
    - The maximum data retention period for 24C01C-I/SN is 200 years.

  7. Can 24C01C-I/SN operate at high temperatures?
    - Yes, 24C01C-I/SN can operate at high temperatures up to 125°C.

  8. Does 24C01C-I/SN have built-in write protection?
    - Yes, 24C01C-I/SN features built-in hardware write protection.

  9. What is the memory capacity of 24C01C-I/SN?
    - The memory capacity of 24C01C-I/SN is 1 Kbit (128 bytes).

  10. Is 24C01C-I/SN RoHS compliant?
    - Yes, 24C01C-I/SN is RoHS compliant.