이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
24FC256T-I/MS

24FC256T-I/MS

Product Overview

Category: Integrated Circuit (IC)

Use: Non-volatile memory storage

Characteristics: - High-density storage - Low power consumption - Serial EEPROM technology - I2C interface - Wide operating voltage range - Extended temperature range

Package: MSOP (Mini Small Outline Package)

Essence: The 24FC256T-I/MS is a high-performance serial EEPROM IC that provides non-volatile memory storage for various applications.

Packaging/Quantity: The 24FC256T-I/MS is available in a reel packaging with a quantity of 2500 units per reel.

Specifications

  • Memory Size: 256 kilobits (32 kilobytes)
  • Organization: 32,768 x 8 bits
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage Range: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1,000,000 cycles
  • Data Retention: 200 years
  • Maximum Clock Frequency: 1 MHz

Detailed Pin Configuration

The 24FC256T-I/MS has a total of 8 pins:

  1. VSS: Ground
  2. SDA: Serial Data Input/Output
  3. SCL: Serial Clock Input
  4. WP: Write Protect
  5. VCC: Power Supply
  6. A0: Chip Address Bit 0
  7. A1: Chip Address Bit 1
  8. A2: Chip Address Bit 2

Functional Features

  • High-density storage: The 24FC256T-I/MS offers 256 kilobits of non-volatile memory, providing ample space for data storage.
  • Low power consumption: The IC operates with low power requirements, making it suitable for battery-powered devices.
  • Serial EEPROM technology: It utilizes Electrically Erasable Programmable Read-Only Memory (EEPROM) technology, allowing for easy read and write operations.
  • I2C interface: The IC communicates using the I2C protocol, enabling simple integration into various systems.
  • Wide operating voltage range: It can operate within a voltage range of 1.7V to 5.5V, providing flexibility in different applications.
  • Extended temperature range: The IC can withstand temperatures ranging from -40°C to +85°C, making it suitable for harsh environments.

Advantages and Disadvantages

Advantages: - High storage capacity - Low power consumption - Easy integration with I2C interface - Wide operating voltage range - Extended temperature range

Disadvantages: - Limited maximum clock frequency (1 MHz) - Relatively small package size

Working Principles

The 24FC256T-I/MS uses EEPROM technology to store data. It employs an I2C interface for communication with the host system. The IC can be addressed using three address pins (A0, A1, A2), allowing multiple devices to be connected on the same bus. Data can be written or read by sending appropriate commands through the SDA and SCL lines.

Detailed Application Field Plans

The 24FC256T-I/MS is widely used in various applications, including but not limited to: - Consumer electronics - Automotive systems - Industrial control systems - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 24FC256T-I/MS include: - AT24C256C-SSHL-T by Microchip Technology Inc. - CAT24C256WI-GT3 by ON Semiconductor - M24C256-FMN6TP by STMicroelectronics

These alternative models provide comparable memory capacity, interface compatibility, and operating characteristics.

In conclusion, the 24FC256T-I/MS is a high-performance serial EEPROM IC that offers high-density non-volatile memory storage. With its low power consumption, wide operating voltage range, and extended temperature range, it is suitable for various applications in different industries.

기술 솔루션에 24FC256T-I/MS 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency for 24FC256T-I/MS?
    - The maximum clock frequency for 24FC256T-I/MS is 1MHz.

  2. What is the operating voltage range for 24FC256T-I/MS?
    - The operating voltage range for 24FC256T-I/MS is 1.7V to 5.5V.

  3. Can 24FC256T-I/MS be used in automotive applications?
    - Yes, 24FC256T-I/MS is suitable for use in automotive applications.

  4. What is the typical write time for 24FC256T-I/MS?
    - The typical write time for 24FC256T-I/MS is 5ms.

  5. Is 24FC256T-I/MS compatible with I2C communication protocol?
    - Yes, 24FC256T-I/MS is compatible with I2C communication protocol.

  6. What is the temperature range for 24FC256T-I/MS?
    - The temperature range for 24FC256T-I/MS is -40°C to +85°C.

  7. Can 24FC256T-I/MS be used in industrial control systems?
    - Yes, 24FC256T-I/MS can be used in industrial control systems.

  8. What is the maximum data retention for 24FC256T-I/MS?
    - The maximum data retention for 24FC256T-I/MS is 200 years.

  9. Does 24FC256T-I/MS support sequential read and write operations?
    - Yes, 24FC256T-I/MS supports sequential read and write operations.

  10. Is 24FC256T-I/MS RoHS compliant?
    - Yes, 24FC256T-I/MS is RoHS compliant.