이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
AT24C128C-SSHM-T

AT24C128C-SSHM-T

Product Overview

Category

AT24C128C-SSHM-T belongs to the category of EEPROM (Electrically Erasable Programmable Read-Only Memory) chips.

Use

This chip is commonly used for non-volatile data storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The stored data remains even when power is removed.
  • Electrically erasable and programmable: Data can be modified electronically.
  • High capacity: The AT24C128C-SSHM-T has a storage capacity of 128 kilobits (16 kilobytes).
  • Low power consumption: It operates at low voltage and consumes minimal power.
  • High reliability: The chip is designed to withstand harsh environmental conditions.
  • Fast operation: It offers high-speed read and write operations.

Package

The AT24C128C-SSHM-T comes in an industry-standard 8-pin Small Outline Integrated Circuit (SOIC) package.

Essence

The essence of this chip lies in its ability to store and retrieve digital information reliably and efficiently.

Packaging/Quantity

The AT24C128C-SSHM-T is typically packaged in reels or tubes, with each reel containing 2,500 units.

Specifications

  • Storage Capacity: 128 kilobits (16 kilobytes)
  • Interface: I2C (Inter-Integrated Circuit)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The AT24C128C-SSHM-T has eight pins, which are assigned specific functions:

  1. A0: Address Input
  2. A1: Address Input
  3. A2: Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random Access: Allows reading and writing data at any memory location.
  • Page Write Mode: Enables writing multiple bytes in a single operation, improving efficiency.
  • Software Write Protection: Provides the ability to protect specific memory areas from being modified.
  • Hardware Write Protection: Allows the entire chip to be write-protected using the WP pin.

Advantages and Disadvantages

Advantages

  • High storage capacity for EEPROM chips of this category.
  • Low power consumption, making it suitable for battery-powered devices.
  • Wide operating voltage range allows compatibility with various systems.
  • Fast read and write operations enhance overall system performance.
  • High reliability ensures data integrity even in challenging environments.

Disadvantages

  • Limited storage capacity compared to other non-volatile memory options.
  • Relatively higher cost per kilobit compared to larger capacity EEPROMs.
  • Requires an I2C interface, which may not be supported by all microcontrollers or devices.

Working Principles

The AT24C128C-SSHM-T operates based on the principles of EEPROM technology. It utilizes a grid of floating-gate transistors to store digital information. The stored data can be accessed and modified through the I2C interface. When reading data, the chip activates the appropriate memory cells and retrieves the stored information. During the write operation, the chip applies a high voltage to the selected memory cells, allowing electrons to tunnel into or out of the floating gate, altering its charge and thus storing new data.

Detailed Application Field Plans

The AT24C128C-SSHM-T finds applications in various fields, including:

  1. Embedded Systems: Used for storing configuration data, firmware updates, and user settings in microcontrollers and IoT devices.
  2. Automotive Electronics: Employed for storing critical data like calibration parameters, mileage, and vehicle identification numbers.
  3. Industrial Control Systems: Utilized for storing system parameters, calibration data, and event logs in programmable logic controllers (PLCs) and industrial automation equipment.
  4. Consumer Electronics: Integrated into devices like smart TVs, set-top boxes, and audio systems to store user preferences, channel lists, and firmware updates.

Detailed and Complete Alternative Models

  1. AT24C256C-SSHM-T: Offers double the storage capacity of the AT24C128C-SSHM-T (256 kilobits).
  2. AT24C512C-SSHM-T: Provides four times the storage capacity of the AT24C128C-SSHM-T (512 kilobits).
  3. AT24C1024C-SSHM-T: Offers eight times the storage capacity of the AT24C128C-SSHM-T (1024 kilobits).

These alternative models provide increased storage capacity options for applications requiring

기술 솔루션에 AT24C128C-SSHM-T 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of AT24C128C-SSHM-T in technical solutions:

  1. Q: What is the AT24C128C-SSHM-T? A: The AT24C128C-SSHM-T is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip with a capacity of 128 kilobits (16 kilobytes).

  2. Q: What are some typical applications for the AT24C128C-SSHM-T? A: The AT24C128C-SSHM-T is commonly used in various electronic devices, such as industrial control systems, automotive electronics, consumer electronics, and medical equipment.

  3. Q: How does the AT24C128C-SSHM-T communicate with other devices? A: The AT24C128C-SSHM-T uses the I2C (Inter-Integrated Circuit) protocol for communication, which allows it to interface with microcontrollers and other digital ICs.

  4. Q: What is the operating voltage range of the AT24C128C-SSHM-T? A: The AT24C128C-SSHM-T operates within a voltage range of 1.7V to 5.5V, making it compatible with a wide range of power supply systems.

  5. Q: Can the AT24C128C-SSHM-T be reprogrammed? A: Yes, the AT24C128C-SSHM-T is electrically erasable and programmable, allowing data to be written and rewritten multiple times.

  6. Q: What is the maximum clock frequency supported by the AT24C128C-SSHM-T? A: The AT24C128C-SSHM-T supports a maximum clock frequency of 1 MHz, enabling fast data transfer rates.

  7. Q: Does the AT24C128C-SSHM-T have any built-in security features? A: Yes, the AT24C128C-SSHM-T offers a write protection feature that allows specific memory areas to be locked, preventing accidental or unauthorized modifications.

  8. Q: What is the typical endurance of the AT24C128C-SSHM-T? A: The AT24C128C-SSHM-T has a typical endurance of 1 million write cycles, ensuring reliable and long-lasting data storage.

  9. Q: Can the AT24C128C-SSHM-T operate in extreme temperature conditions? A: Yes, the AT24C128C-SSHM-T is designed to operate within a wide temperature range, typically from -40°C to +85°C, making it suitable for various environments.

  10. Q: Is the AT24C128C-SSHM-T RoHS compliant? A: Yes, the AT24C128C-SSHM-T is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring its environmental friendliness.

Please note that these answers are general and may vary depending on the specific application and requirements.