Microchip Technology
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
ATTINY25V-15MT

ATTINY25V-15MT

Product Overview

Category

The ATTINY25V-15MT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and embedded systems.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Versatile functionality

Package

The ATTINY25V-15MT is available in a surface mount package.

Essence

This microcontroller is designed to provide efficient and reliable control for electronic applications.

Packaging/Quantity

The ATTINY25V-15MT is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

  • Operating Voltage: 1.8V - 5.5V
  • Flash Memory: 2KB
  • SRAM: 128B
  • EEPROM: 128B
  • Clock Speed: Up to 16MHz
  • Digital I/O Pins: 6
  • Analog Input Pins: 4
  • PWM Channels: 3
  • Communication Interfaces: SPI, I2C, UART

Detailed Pin Configuration

The ATTINY25V-15MT has a total of 8 pins, each serving a specific purpose:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. RESET: Reset pin for restarting the microcontroller
  4. PB3: General-purpose digital I/O pin
  5. PB4: General-purpose digital I/O pin
  6. PB0: General-purpose digital I/O pin
  7. PB1: General-purpose digital I/O pin
  8. PB2: General-purpose digital I/O pin

Functional Features

  • Low power consumption allows for extended battery life in portable devices.
  • High-performance capabilities enable efficient processing of complex tasks.
  • Small form factor makes it suitable for space-constrained applications.
  • Versatile functionality supports a wide range of applications and interfaces.

Advantages and Disadvantages

Advantages

  • Low power consumption extends battery life.
  • High-performance capabilities enable efficient processing.
  • Versatile functionality supports various applications.
  • Small form factor allows for compact designs.

Disadvantages

  • Limited number of I/O pins may restrict the complexity of projects.
  • Small package size can make soldering more challenging for inexperienced users.

Working Principles

The ATTINY25V-15MT operates based on the principles of microcontroller architecture. It consists of a central processing unit (CPU), memory, and various peripherals. The CPU executes instructions stored in the flash memory, interacts with external devices through input/output pins, and utilizes internal resources such as timers, analog-to-digital converters, and communication interfaces to perform desired tasks.

Detailed Application Field Plans

The ATTINY25V-15MT finds applications in various fields, including but not limited to:

  1. Internet of Things (IoT) devices
  2. Home automation systems
  3. Wearable technology
  4. Industrial control systems
  5. Consumer electronics
  6. Robotics
  7. Automotive electronics

Detailed and Complete Alternative Models

  1. ATTINY45V-10PU: Similar to ATTINY25V-15MT but with additional I/O pins.
  2. ATTINY85V-20PU: Higher memory capacity and more I/O pins compared to ATTINY25V-15MT.
  3. ATTINY13A-PU: Lower cost alternative with reduced memory and I/O capabilities.

These alternative models offer varying features and specifications to cater to different project requirements.

In conclusion, the ATTINY25V-15MT is a versatile microcontroller that combines low power consumption, high performance, and a small form factor. Its wide range of applications, functional features, and availability of alternative models make it a popular choice among developers and hobbyists in the field of embedded systems.

기술 솔루션에 ATTINY25V-15MT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of ATTINY25V-15MT in technical solutions:

  1. Q: What is the ATTINY25V-15MT microcontroller used for? A: The ATTINY25V-15MT is a low-power, high-performance microcontroller commonly used in various technical solutions such as embedded systems, IoT devices, and consumer electronics.

  2. Q: What is the operating voltage range of the ATTINY25V-15MT? A: The ATTINY25V-15MT operates within a voltage range of 1.8V to 5.5V.

  3. Q: How much flash memory does the ATTINY25V-15MT have? A: The ATTINY25V-15MT has 2KB of flash memory, which can be used for storing program code.

  4. Q: Can I use the ATTINY25V-15MT for analog applications? A: Yes, the ATTINY25V-15MT has an integrated 10-bit ADC (Analog-to-Digital Converter) that allows you to interface with analog sensors or signals.

  5. Q: Does the ATTINY25V-15MT support PWM (Pulse Width Modulation)? A: Yes, the ATTINY25V-15MT supports PWM, which is useful for controlling motors, LEDs, and other devices that require variable output levels.

  6. Q: What communication interfaces are available on the ATTINY25V-15MT? A: The ATTINY25V-15MT has a Universal Serial Interface (USI) that supports SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) protocols.

  7. Q: Can I use the ATTINY25V-15MT with Arduino IDE? A: Yes, you can program the ATTINY25V-15MT using the Arduino IDE by selecting the appropriate board and configuring the necessary settings.

  8. Q: What is the maximum clock frequency of the ATTINY25V-15MT? A: The ATTINY25V-15MT can operate at a maximum clock frequency of 20MHz.

  9. Q: Is the ATTINY25V-15MT suitable for battery-powered applications? A: Yes, the ATTINY25V-15MT is designed to be power-efficient, making it suitable for battery-powered applications where low power consumption is important.

  10. Q: Can I use the ATTINY25V-15MT in industrial environments? A: Yes, the ATTINY25V-15MT has a wide operating temperature range (-40°C to +85°C) and can withstand harsh industrial conditions.

Please note that these answers are general and may vary depending on specific application requirements and configurations.