MCP2561T-H/MF
Product Overview
Category
The MCP2561T-H/MF belongs to the category of high-speed CAN transceivers.
Use
It is used for connecting a CAN protocol controller to the physical two-wire CAN bus.
Characteristics
- High-speed operation (up to 1 Mbps)
- Low standby current
- Protection against ESD and short-circuit conditions
- Suitable for automotive and industrial applications
Package
The MCP2561T-H/MF is available in an 8-pin SOIC package.
Essence
The essence of the MCP2561T-H/MF lies in its ability to facilitate reliable communication on a CAN bus in high-speed applications.
Packaging/Quantity
The MCP2561T-H/MF is typically packaged in reels with a quantity of 2500 units per reel.
Specifications
- Supply Voltage: 4.5V to 5.5V
- Operating Temperature Range: -40°C to 125°C
- Transmit Data Rate: Up to 1 Mbps
- Standby Current: 10 µA (typical)
Detailed Pin Configuration
The MCP2561T-H/MF features the following pin configuration: 1. VDD 2. VSS 3. TXD 4. RXD 5. S 6. CANH 7. CANL 8. VREF
Functional Features
- Integrated protection features for robust communication
- High-speed transmission capability
- Low power consumption in standby mode
- Compatible with 3.3V and 5V microcontrollers
Advantages and Disadvantages
Advantages
- Robust ESD protection
- Wide operating temperature range
- Low standby current for power efficiency
Disadvantages
- Limited to high-speed CAN applications
- Requires external voltage reference for certain configurations
Working Principles
The MCP2561T-H/MF operates by converting digital signals from the CAN controller into differential signals suitable for transmission over the CAN bus. It also provides protection against common fault conditions such as ESD and short circuits.
Detailed Application Field Plans
The MCP2561T-H/MF is well-suited for use in various automotive and industrial applications, including: - Automotive engine control systems - Industrial automation networks - Vehicle body electronics - HVAC systems in commercial vehicles
Detailed and Complete Alternative Models
Some alternative models to the MCP2561T-H/MF include: - MCP2561-I/P - TJA1040 - SN65HVD251
In summary, the MCP2561T-H/MF is a high-speed CAN transceiver that offers robust communication capabilities for automotive and industrial applications, making it a valuable component in modern electronic systems.
Word Count: 372
기술 솔루션에 MCP2561T-H/MF 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
What is the maximum data rate supported by MCP2561T-H/MF?
- The maximum data rate supported by MCP2561T-H/MF is 1 Mbps.Can MCP2561T-H/MF be used in automotive applications?
- Yes, MCP2561T-H/MF is suitable for automotive applications as it meets AEC-Q100 standards.What is the operating voltage range of MCP2561T-H/MF?
- The operating voltage range of MCP2561T-H/MF is 4.5V to 5.5V.Does MCP2561T-H/MF support bus fault protection?
- Yes, MCP2561T-H/MF features bus fault protection to ensure robust communication.Is MCP2561T-H/MF compatible with CAN FD (Flexible Data-Rate) protocol?
- Yes, MCP2561T-H/MF is compatible with CAN FD protocol.What is the typical standby current consumption of MCP2561T-H/MF?
- The typical standby current consumption of MCP2561T-H/MF is 10 µA.Can MCP2561T-H/MF operate in extended temperature ranges?
- Yes, MCP2561T-H/MF can operate in extended temperature ranges from -40°C to 125°C.Does MCP2561T-H/MF require an external crystal oscillator?
- No, MCP2561T-H/MF does not require an external crystal oscillator.What is the ESD protection level of MCP2561T-H/MF?
- MCP2561T-H/MF provides ±12 kV Human Body Model (HBM) ESD protection.Is MCP2561T-H/MF available in a small form factor package?
- Yes, MCP2561T-H/MF is available in a small 8-pin SOIC package for space-constrained applications.