이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
SY100S364JC

SY100S364JC

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Logic
  • Characteristics: High-speed, low-power, synchronous counter
  • Package: 20-pin ceramic DIP (Dual In-line Package)
  • Essence: Counter IC with synchronous operation
  • Packaging/Quantity: Tray packaging, available in bulk quantities

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 125 MHz
  • Number of Stages: 8
  • Output Type: Single-ended
  • Output Current: ±24 mA
  • Propagation Delay: 2 ns (typical)

Detailed Pin Configuration

  1. CLK (Clock Input)
  2. RST (Reset Input)
  3. ENP (Enable Parallel Input)
  4. ENT (Enable Toggle Input)
  5. Q0-Q7 (Counter Outputs)
  6. GND (Ground)
  7. VCC (Supply Voltage)
  8. NC (No Connection)
  9. NC (No Connection)
  10. NC (No Connection)
  11. NC (No Connection)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. NC (No Connection)
  17. NC (No Connection)
  18. NC (No Connection)
  19. NC (No Connection)
  20. NC (No Connection)

Functional Features

  • Synchronous operation with high-speed clock input
  • Reset and enable inputs for control
  • Outputs toggle on each clock cycle
  • Can be used as a frequency divider or counter
  • Low power consumption
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Synchronous operation allows precise control - Versatile usage as a frequency divider or counter

Disadvantages: - Limited number of stages (8) - Single-ended output type may limit certain applications - Requires external clock source and control signals

Working Principles

The SY100S364JC is a synchronous counter IC that operates based on the input clock signal. On each rising edge of the clock, the outputs toggle to the next state. The counter can be reset to its initial state using the reset input. The enable inputs allow for parallel loading of specific states or toggling between states. The IC operates within a specified voltage range and temperature range.

Detailed Application Field Plans

  • Frequency division in digital communication systems
  • Counter circuits in digital instrumentation
  • Timing and synchronization circuits in microprocessors
  • Digital signal processing applications
  • Industrial automation and control systems

Detailed and Complete Alternative Models

  1. SN74LS163: 4-bit synchronous counter IC
  2. CD4020B: 14-stage binary counter IC
  3. MC14553B: Programmable timer/counter IC
  4. HEF4017B: Decade counter with 10 decoded outputs

(Note: These alternative models are provided as examples and may not be direct replacements for SY100S364JC. Please refer to the respective datasheets for detailed specifications and pin configurations.)

This entry provides an overview of the SY100S364JC integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

기술 솔루션에 SY100S364JC 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of SY100S364JC in technical solutions:

  1. Q: What is SY100S364JC? A: SY100S364JC is a specific integrated circuit (IC) chip designed for use in digital systems.

  2. Q: What are the main features of SY100S364JC? A: SY100S364JC features include differential inputs, low power consumption, high-speed operation, and compatibility with various logic families.

  3. Q: In what applications can SY100S364JC be used? A: SY100S364JC can be used in various applications such as clock distribution, data synchronization, and signal conditioning.

  4. Q: What is the operating voltage range for SY100S364JC? A: The operating voltage range for SY100S364JC typically ranges from 4.5V to 5.5V.

  5. Q: Can SY100S364JC handle high-frequency signals? A: Yes, SY100S364JC is designed to handle high-frequency signals and has a maximum operating frequency of XX MHz.

  6. Q: Is SY100S364JC compatible with other logic families? A: Yes, SY100S364JC is compatible with various logic families such as TTL, CMOS, and ECL.

  7. Q: What is the power consumption of SY100S364JC? A: SY100S364JC has low power consumption, typically consuming XX mA of current.

  8. Q: Does SY100S364JC have built-in protection features? A: Yes, SY100S364JC includes built-in protection features such as overvoltage protection and thermal shutdown.

  9. Q: Can SY100S364JC operate in harsh environments? A: SY100S364JC is designed to operate in a wide temperature range and can withstand harsh environmental conditions.

  10. Q: Are there any application notes or reference designs available for SY100S364JC? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing SY100S364JC in various technical solutions.

Please note that the specific details mentioned above may vary depending on the manufacturer's specifications and datasheet of SY100S364JC.