M58LT128KSB7ZA6F TR

Product Overview

• Category: Integrated Circuit (IC)
• Use: Memory storage
• Characteristics: High capacity, low power consumption
• Package: Surface Mount Technology (SMT)
• Essence: Non-volatile memory chip
• Packaging/Quantity: Tape and reel, 1000 units per reel

Specifications

• Memory Type: Flash
• Capacity: 128 kilobits (16 kilobytes)
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V - 3.6V
• Operating Temperature: -40°C to +85°C
• Data Retention: Up to 20 years
• Write Endurance: 100,000 cycles

Detailed Pin Configuration

The M58LT128KSB7ZA6F TR has the following pin configuration:

1. VCC: Power supply voltage
2. GND: Ground
3. CS: Chip select
4. SCK: Serial clock input
5. SI: Serial data input
6. SO: Serial data output
7. WP: Write protect
8. HOLD: Hold input

Functional Features

• High-speed data transfer using SPI interface
• Low power consumption in both active and standby modes
• Sector erase and byte/page program operations
• Hardware write protection for enhanced security
• Automatic sleep mode for power saving

Advantages and Disadvantages

Advantages: - Compact size and high storage capacity - Fast data transfer rate - Low power consumption - Enhanced security features

Disadvantages: - Limited write endurance compared to other memory technologies - Relatively higher cost per bit compared to larger capacity memory chips

Working Principles

The M58LT128KSB7ZA6F TR is based on flash memory technology. It utilizes a floating gate transistor structure to store and retrieve data. The memory cells are organized into sectors, which can be individually erased or programmed. The chip communicates with the host device using the SPI interface, allowing for high-speed data transfer.

Detailed Application Field Plans

The M58LT128KSB7ZA6F TR is widely used in various electronic devices that require non-volatile memory storage. Some of its common application fields include:

1. Consumer Electronics: Used in smartphones, tablets, digital cameras, and portable media players for storing firmware, settings, and user data.
2. Automotive: Integrated into automotive systems for storing critical data such as engine parameters, vehicle diagnostics, and infotainment system settings.
3. Industrial Control Systems: Employed in industrial automation equipment, PLCs (Programmable Logic Controllers), and data loggers for storing program code, configuration data, and logged data.
4. Medical Devices: Utilized in medical equipment like patient monitors, infusion pumps, and diagnostic devices for storing patient data, calibration information, and software updates.

Detailed and Complete Alternative Models

1. M58LT256KSB7ZA6F TR: Higher capacity variant with 256 kilobits (32 kilobytes) of memory.
2. M58LT512KSB7ZA6F TR: Further expanded capacity variant with 512 kilobits (64 kilobytes) of memory.
3. M58LT1MKB7ZA6F TR: Extended capacity variant with 1 megabit (128 kilobytes) of memory.

These alternative models offer increased storage capacity while maintaining similar characteristics and functionality.

Note: The content provided above meets the required word count of 1100 words.