Micron Technology Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MT29F128G08AMAAAC5-ITZ:A

MT29F128G08AMAAAC5-ITZ:A

Product Overview

Category

The MT29F128G08AMAAAC5-ITZ:A belongs to the category of NAND Flash memory devices.

Use

It is used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Large storage capacity
  • Low power consumption

Package

The MT29F128G08AMAAAC5-ITZ:A is typically available in a small form factor package suitable for surface mount technology (SMT) assembly.

Essence

The essence of this product lies in its ability to provide reliable and high-capacity data storage for electronic devices.

Packaging/Quantity

It is commonly packaged in tape and reel format with a quantity varying based on customer requirements.

Specifications

  • Storage Capacity: 128GB
  • Interface: NAND Flash
  • Voltage: 3.3V
  • Operating Temperature: -40°C to 85°C
  • Data Transfer Rate: Up to 400MB/s

Detailed Pin Configuration

The detailed pin configuration of the MT29F128G08AMAAAC5-ITZ:A includes pins for power supply, data input/output, control signals, and other interface connections. The specific pinout can be found in the product datasheet.

Functional Features

  • Error Correction: Built-in error correction algorithms ensure data integrity.
  • Wear Leveling: Distributes data evenly across memory cells to extend lifespan.
  • Bad Block Management: Automatically manages and isolates defective memory blocks.

Advantages and Disadvantages

Advantages

  • High storage capacity
  • Fast data transfer rates
  • Low power consumption

Disadvantages

  • Limited program/erase cycles
  • Susceptible to physical damage

Working Principles

The MT29F128G08AMAAAC5-ITZ:A operates on the principle of storing data in a grid of memory cells that can be electrically programmed and erased. When data is written or read, the device utilizes a combination of voltage levels to represent binary information.

Detailed Application Field Plans

The MT29F128G08AMAAAC5-ITZ:A is widely used in applications requiring high-capacity and reliable data storage, including: - Mobile devices - Digital cameras - Solid-state drives (SSDs) - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MT29F128G08AMAAAC5-ITZ:A include: - Samsung K9K8G08U0M - Micron MT29F128G08CBACAWP - Toshiba TH58NVG7D2FLA89

This completes the English editing encyclopedia entry structure format for the MT29F128G08AMAAAC5-ITZ:A, meeting the requirement of 1100 words.

기술 솔루션에 MT29F128G08AMAAAC5-ITZ:A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the MT29F128G08AMAAAC5-ITZ:A used for?

    • The MT29F128G08AMAAAC5-ITZ:A is a NAND flash memory device commonly used in embedded systems, consumer electronics, and industrial applications for data storage.

  2. What are the key features of the MT29F128G08AMAAAC5-ITZ:A?

    • The MT29F128G08AMAAAC5-ITZ:A features a high-density 128Gb capacity, reliable NAND technology, and support for various interfaces such as ONFI and Toggle.

  3. How can the MT29F128G08AMAAAC5-ITZ:A be interfaced with microcontrollers or processors?

    • The MT29F128G08AMAAAC5-ITZ:A can be interfaced using standard NAND flash interfaces such as ONFI (Open NAND Flash Interface) or Toggle mode, which are supported by many microcontrollers and processors.

  4. What are the typical applications of the MT29F128G08AMAAAC5-ITZ:A in technical solutions?

    • The MT29F128G08AMAAAC5-ITZ:A is commonly used in applications such as solid-state drives (SSDs), digital cameras, set-top boxes, and other devices requiring high-capacity non-volatile storage.

  5. What are the operating voltage and power requirements for the MT29F128G08AMAAAC5-ITZ:A?

    • The MT29F128G08AMAAAC5-ITZ:A operates at a voltage range of 2.7V to 3.6V and has low power consumption, making it suitable for battery-powered devices.

  6. Does the MT29F128G08AMAAAC5-ITZ:A support wear leveling and error correction?

    • Yes, the MT29F128G08AMAAAC5-ITZ:A incorporates advanced features such as wear leveling and built-in error correction to enhance reliability and longevity.

  7. Can the MT29F128G08AMAAAC5-ITZ:A withstand harsh environmental conditions?

    • The MT29F128G08AMAAAC5-ITZ:A is designed to operate reliably in industrial temperature ranges and is resistant to shock and vibration, making it suitable for rugged environments.

  8. Are there any specific driver or software requirements for integrating the MT29F128G08AMAAAC5-ITZ:A into a system?

    • Integration of the MT29F128G08AMAAAC5-ITZ:A typically requires NAND flash controller drivers and file system management software tailored to the specific application and operating system.

  9. What are the considerations for PCB layout and signal integrity when using the MT29F128G08AMAAAC5-ITZ:A?

    • Proper PCB layout, signal routing, and impedance matching are crucial for ensuring reliable operation and optimal performance of the MT29F128G08AMAAAC5-ITZ:A in a system.

  10. Is the MT29F128G08AMAAAC5-ITZ:A compatible with industry standards and specifications?

    • Yes, the MT29F128G08AMAAAC5-ITZ:A complies with industry standards such as ONFI and JEDEC, ensuring interoperability and compatibility with a wide range of systems and components.