이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MTFC8GLZDM-1M WT

MTFC8GLZDM-1M WT

Product Overview

Category

MTFC8GLZDM-1M WT belongs to the category of NAND flash memory.

Use

This product is primarily used for data storage in various electronic devices such as smartphones, tablets, digital cameras, and solid-state drives (SSDs).

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Compact size
  • Low power consumption

Package

MTFC8GLZDM-1M WT is packaged in a small form factor, making it suitable for integration into compact electronic devices.

Essence

The essence of this product lies in its ability to store and retrieve large amounts of data reliably and quickly.

Packaging/Quantity

MTFC8GLZDM-1M WT is typically sold in bulk packaging, with quantities varying based on customer requirements.

Specifications

  • Capacity: 8GB
  • Interface: Universal Flash Storage (UFS)
  • Voltage: 2.7V - 3.6V
  • Operating Temperature: -25°C to 85°C
  • Sequential Read Speed: Up to 550MB/s
  • Sequential Write Speed: Up to 520MB/s

Detailed Pin Configuration

The pin configuration of MTFC8GLZDM-1M WT is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. CE# - Chip Enable
  4. RE# - Read Enable
  5. WE# - Write Enable
  6. CLE - Command Latch Enable
  7. ALE - Address Latch Enable
  8. R/B# - Ready/Busy
  9. DQ[0:7] - Data Input/Output

Functional Features

  • Error Correction Code (ECC) for data integrity
  • Wear-leveling algorithm for even distribution of write cycles
  • Bad block management for efficient memory utilization
  • Power-loss protection to prevent data loss during sudden power failures

Advantages and Disadvantages

Advantages

  • High-speed data transfer enables faster device performance
  • Non-volatile memory ensures data retention even without power
  • Compact size allows for integration into small electronic devices
  • Low power consumption prolongs battery life

Disadvantages

  • Limited storage capacity compared to higher-end NAND flash memory options
  • Relatively higher cost per gigabyte compared to traditional hard drives

Working Principles

MTFC8GLZDM-1M WT utilizes NAND flash memory technology, which stores data in a series of memory cells. These cells are organized into pages and blocks, with each cell capable of storing multiple bits of information. When data is written, the memory controller applies voltage to the appropriate cells, altering their electrical state to represent the desired data. Reading data involves detecting the electrical state of the cells and converting it back into usable information.

Detailed Application Field Plans

MTFC8GLZDM-1M WT finds applications in various electronic devices, including: - Smartphones and tablets - Digital cameras - Solid-state drives (SSDs) - Portable media players - Automotive infotainment systems

Detailed and Complete Alternative Models

Some alternative models to MTFC8GLZDM-1M WT include: - Samsung K9GAG08U0E - Toshiba THGBMHG7C2LBAIL - Micron MT29F64G08CBABA

These models offer similar capacities and features, providing customers with alternative options based on their specific requirements.

Word count: 410 words

기술 솔루션에 MTFC8GLZDM-1M WT 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MTFC8GLZDM-1M WT in technical solutions:

Q1: What is MTFC8GLZDM-1M WT? A1: MTFC8GLZDM-1M WT is a specific model of flash memory chip manufactured by a particular company.

Q2: What are the key features of MTFC8GLZDM-1M WT? A2: Some key features of MTFC8GLZDM-1M WT include high storage capacity, fast read/write speeds, low power consumption, and reliable performance.

Q3: What are the typical applications of MTFC8GLZDM-1M WT? A3: MTFC8GLZDM-1M WT is commonly used in various technical solutions such as embedded systems, IoT devices, automotive electronics, industrial automation, and consumer electronics.

Q4: What is the storage capacity of MTFC8GLZDM-1M WT? A4: The storage capacity of MTFC8GLZDM-1M WT is typically 8GB (gigabytes).

Q5: What is the interface used by MTFC8GLZDM-1M WT? A5: MTFC8GLZDM-1M WT uses a standard NAND flash interface for data transfer.

Q6: What is the operating voltage range of MTFC8GLZDM-1M WT? A6: The operating voltage range of MTFC8GLZDM-1M WT is usually between 2.7V and 3.6V.

Q7: Can MTFC8GLZDM-1M WT withstand extreme temperatures? A7: Yes, MTFC8GLZDM-1M WT is designed to operate reliably in a wide temperature range, typically from -40°C to 85°C.

Q8: Is MTFC8GLZDM-1M WT compatible with different operating systems? A8: Yes, MTFC8GLZDM-1M WT is compatible with various operating systems such as Linux, Windows, and embedded real-time operating systems.

Q9: Does MTFC8GLZDM-1M WT support wear-leveling algorithms? A9: Yes, MTFC8GLZDM-1M WT incorporates wear-leveling algorithms to ensure even distribution of data writes across the memory cells, prolonging the lifespan of the chip.

Q10: Can MTFC8GLZDM-1M WT be used for firmware storage in electronic devices? A10: Absolutely! MTFC8GLZDM-1M WT is commonly used for firmware storage in devices like smartphones, tablets, digital cameras, and other electronic gadgets.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and application requirements.