이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
N25Q128A13BSF40E

N25Q128A13BSF40E

Product Overview

  • Category: Non-volatile Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: High capacity, fast read/write speeds, low power consumption
  • Package: Surface Mount Technology (SMT) package
  • Essence: Flash memory chip
  • Packaging/Quantity: Individually packaged, quantity varies based on manufacturer

Specifications

  • Memory Capacity: 128 Megabits (16 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Read Speed: Up to 108 MHz
  • Write Speed: Up to 54 MHz
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

The N25Q128A13BSF40E has a total of 8 pins:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • High-speed data transfer with SPI interface
  • Sector erase and byte/page program operations
  • Dual and Quad I/O modes for increased data transfer rates
  • Deep Power-down mode for ultra-low power consumption
  • Hardware and software write protection options

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast read/write speeds - Low power consumption - Compact SMT package - Flexible interface options

Disadvantages: - Limited endurance compared to other non-volatile memory types - Relatively higher cost per unit compared to traditional storage media

Working Principles

The N25Q128A13BSF40E is based on flash memory technology. It utilizes a grid of memory cells, each capable of storing multiple bits of data. The data is stored by trapping electric charges within the floating gate of each cell. These charges can be read and modified using electrical signals sent through the pins of the chip.

Detailed Application Field Plans

The N25Q128A13BSF40E is commonly used in various electronic devices that require non-volatile memory for data storage and retrieval. Some typical application fields include:

  1. Consumer Electronics: Smartphones, tablets, digital cameras
  2. Automotive: Infotainment systems, navigation systems
  3. Industrial: Embedded systems, control units, IoT devices
  4. Networking: Routers, switches, network storage devices

Detailed and Complete Alternative Models

  1. N25Q064A11ESE40F - 64 Megabit (8 Megabyte) capacity, similar features and specifications
  2. N25Q256A13EF840E - 256 Megabit (32 Megabyte) capacity, higher storage capacity
  3. N25Q512A13GSF40E - 512 Megabit (64 Megabyte) capacity, higher storage capacity, faster speeds

(Note: The above alternative models are provided as examples and may vary based on availability and manufacturer.)

Word count: 314 words

기술 솔루션에 N25Q128A13BSF40E 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of N25Q128A13BSF40E in technical solutions:

  1. Question: What is the N25Q128A13BSF40E?
    Answer: The N25Q128A13BSF40E is a flash memory chip manufactured by Micron Technology.

  2. Question: What is the storage capacity of the N25Q128A13BSF40E?
    Answer: The N25Q128A13BSF40E has a storage capacity of 128 megabits (16 megabytes).

  3. Question: What is the interface used to connect the N25Q128A13BSF40E to a microcontroller or other devices?
    Answer: The N25Q128A13BSF40E uses a Serial Peripheral Interface (SPI) for communication.

  4. Question: Can the N25Q128A13BSF40E be used as a boot device?
    Answer: Yes, the N25Q128A13BSF40E can be used as a boot device in many embedded systems.

  5. Question: What is the operating voltage range of the N25Q128A13BSF40E?
    Answer: The N25Q128A13BSF40E operates at a voltage range of 2.7V to 3.6V.

  6. Question: Does the N25Q128A13BSF40E support high-speed data transfer?
    Answer: Yes, the N25Q128A13BSF40E supports Quad SPI mode, which allows for faster data transfer rates.

  7. Question: Is the N25Q128A13BSF40E compatible with different operating temperatures?
    Answer: Yes, the N25Q128A13BSF40E is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  8. Question: Can the N25Q128A13BSF40E be used in automotive applications?
    Answer: Yes, the N25Q128A13BSF40E is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: Does the N25Q128A13BSF40E support hardware and software write protection?
    Answer: Yes, the N25Q128A13BSF40E provides both hardware and software write protection features.

  10. Question: Are there any specific development tools or software required to work with the N25Q128A13BSF40E?
    Answer: Micron provides various development tools, software libraries, and datasheets that can be used to integrate the N25Q128A13BSF40E into your technical solution.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.