TE28F320J3D75A
Product Overview
Category
TE28F320J3D75A belongs to the category of flash memory chips.
Use
It is primarily used for data storage in electronic devices such as computers, smartphones, and digital cameras.
Characteristics
- Non-volatile memory: Retains data even when power is turned off.
- High storage capacity: The TE28F320J3D75A has a storage capacity of 32 gigabits (4 gigabytes).
- Fast read and write speeds: Allows for quick access to stored data.
- Reliable performance: Offers high endurance and data retention capabilities.
- Low power consumption: Optimized for energy efficiency.
Package
The TE28F320J3D75A is available in a compact package that ensures easy integration into various electronic devices.
Essence
The essence of TE28F320J3D75A lies in its ability to provide reliable and high-capacity data storage in a compact form factor.
Packaging/Quantity
The TE28F320J3D75A is typically packaged individually or in reels, depending on the manufacturer's specifications. The quantity per package may vary.
Specifications
- Memory Type: Flash
- Capacity: 32 gigabits (4 gigabytes)
- Interface: Parallel
- Supply Voltage: 2.7V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Package Type: TSOP
Detailed Pin Configuration
The TE28F320J3D75A features a specific pin configuration that enables its proper functioning within a system. The detailed pin configuration is as follows:
- VCC: Power supply voltage
- A0-A21: Address inputs
- DQ0-DQ15: Data input/output lines
- WE#: Write enable
- CE#: Chip enable
- OE#: Output enable
- RP#/BYTE#: Reset/byte enable
- RY/BY#: Ready/busy status
- WP#/ACC: Write protect/acceleration
- VSS: Ground
Functional Features
The TE28F320J3D75A offers the following functional features:
- High-speed read and write operations
- Block erase and sector erase capabilities
- Hardware data protection measures
- Error correction code (ECC) support
- Software and hardware write protection options
- Power-saving standby mode
Advantages and Disadvantages
Advantages
- Large storage capacity
- Fast read and write speeds
- Reliable performance and data retention
- Low power consumption
- Compact form factor
Disadvantages
- Limited endurance (finite number of erase/write cycles)
- Relatively higher cost compared to other memory technologies
Working Principles
The TE28F320J3D75A utilizes a floating-gate transistor technology to store and retrieve data. It employs a combination of electrical charges to represent binary information, which can be read, written, or erased using specific voltage levels and control signals.
Detailed Application Field Plans
The TE28F320J3D75A finds applications in various electronic devices and systems, including but not limited to: - Personal computers - Laptops and notebooks - Smartphones and tablets - Digital cameras - Automotive electronics - Industrial control systems
Detailed and Complete Alternative Models
- TE28F320J3D75B
- TE28F320J3D75C
- TE28F320J3D75D
- TE28F320J3D75E
These alternative models offer similar specifications and functionality to the TE28F320J3D75A, providing users with options based on their specific requirements.
In conclusion, the TE28F320J3D75A flash memory chip is a reliable and high-capacity storage solution for various electronic devices. Its fast read and write speeds, along with its compact form factor, make it suitable for a wide range of applications. While it has limitations in terms of endurance and cost, alternative models are available to cater to different needs.
기술 솔루션에 TE28F320J3D75A 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.
Sure! Here are 10 common questions and answers related to the application of TE28F320J3D75A in technical solutions:
1. What is TE28F320J3D75A? TE28F320J3D75A is a flash memory device manufactured by Intel. It has a capacity of 32 megabits (4 megabytes) and operates at a voltage range of 2.7V to 3.6V.
2. What are the typical applications of TE28F320J3D75A? TE28F320J3D75A is commonly used in various embedded systems, such as industrial automation, automotive electronics, consumer electronics, and telecommunications equipment.
3. What is the interface of TE28F320J3D75A? TE28F320J3D75A uses a parallel interface with an 8-bit data bus. It also supports various control signals for read, write, and erase operations.
4. What is the maximum operating frequency of TE28F320J3D75A? The maximum operating frequency of TE28F320J3D75A is 75 MHz, which allows for fast data transfer rates.
5. Can TE28F320J3D75A be used for code storage in microcontrollers? Yes, TE28F320J3D75A can be used for code storage in microcontrollers. It provides reliable non-volatile storage for program code and allows for efficient execution of instructions.
6. Does TE28F320J3D75A support in-system programming (ISP)? Yes, TE28F320J3D75A supports in-system programming, which means that it can be programmed while it is connected to the target system without the need for removal or replacement.
7. What is the erase time of TE28F320J3D75A? TE28F320J3D75A has a typical erase time of 2 milliseconds, which allows for quick erasure of the entire memory or specific sectors.
8. Can TE28F320J3D75A withstand high temperatures? Yes, TE28F320J3D75A is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for applications that require extended temperature tolerance.
9. Does TE28F320J3D75A have built-in error correction capabilities? No, TE28F320J3D75A does not have built-in error correction capabilities. However, it can be used with external error correction codes (ECC) to enhance data integrity.
10. Is TE28F320J3D75A a lead-free device? Yes, TE28F320J3D75A is a lead-free device and complies with RoHS (Restriction of Hazardous Substances) regulations, making it environmentally friendly.
Please note that these answers are general and may vary depending on the specific requirements and datasheet of TE28F320J3D75A.