Microsemi Corporation
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MXL1.5KE20AE3
자세히보기 데이터시트

MXL1.5KE20AE3

Product Overview

Category

The MXL1.5KE20AE3 belongs to the category of transient voltage suppressor diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge capability
  • RoHS compliant

Package

The MXL1.5KE20AE3 is available in a DO-201AD package.

Essence

This diode is essential for safeguarding electronic circuits from voltage spikes and surges.

Packaging/Quantity

It is typically packaged in reels or tubes and is available in quantities suitable for both prototyping and production.

Specifications

  • Peak Pulse Power: 1500W
  • Breakdown Voltage: 17.1V
  • Maximum Clamping Voltage: 27.4V
  • Operating Temperature Range: -55°C to 175°C
  • Reverse Standoff Voltage: 15V

Detailed Pin Configuration

The MXL1.5KE20AE3 has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Provides protection against overvoltage events
  • Rapidly responds to transient voltage spikes
  • Maintains low clamping voltage during surge events

Advantages and Disadvantages

Advantages

  • High surge capability
  • RoHS compliant
  • Fast response time

Disadvantages

  • Limited to specific voltage ranges
  • Requires proper installation for effective protection

Working Principles

The MXL1.5KE20AE3 operates by diverting excess current away from sensitive components when a voltage surge occurs, thereby preventing damage to the circuit.

Detailed Application Field Plans

The MXL1.5KE20AE3 is commonly used in the following applications: - Power supplies - Telecommunication equipment - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the MXL1.5KE20AE3 include: - P6KE15CA - 1.5KE15CA - SA15CA

In conclusion, the MXL1.5KE20AE3 transient voltage suppressor diode is an essential component for protecting electronic circuits from voltage transients. Its fast response time, low clamping voltage, and high surge capability make it suitable for a wide range of applications, including power supplies, telecommunication equipment, automotive electronics, and industrial control systems.

[Word count: 345]

기술 솔루션에 MXL1.5KE20AE3 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum peak pulse power of MXL1.5KE20AE3?

    • The maximum peak pulse power is 1500W for a 10/1000μs waveform.

  2. What is the breakdown voltage of MXL1.5KE20AE3?

    • The breakdown voltage is 18.8V to 20.9V at 1mA.

  3. What are the typical applications of MXL1.5KE20AE3?

    • It is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial controls, and automotive systems.

  4. What is the clamping voltage of MXL1.5KE20AE3?

    • The clamping voltage is 29.2V at 19.9A.

  5. What is the operating temperature range of MXL1.5KE20AE3?

    • The operating temperature range is -55°C to +175°C.

  6. Does MXL1.5KE20AE3 meet industry standards for surge protection?

    • Yes, it meets the requirements of various industry standards, including IEC 61000-4-5 and MIL-STD-883.

  7. Can MXL1.5KE20AE3 be used for ESD protection?

    • Yes, it can provide effective ESD protection for sensitive electronic components.

  8. What is the response time of MXL1.5KE20AE3?

    • The response time is typically less than 1 picosecond.

  9. Is MXL1.5KE20AE3 RoHS compliant?

    • Yes, it is RoHS compliant, making it suitable for use in environmentally conscious designs.

  10. Are there any recommended layout considerations when using MXL1.5KE20AE3?

    • Yes, it is recommended to minimize lead lengths and provide low impedance paths to the device for optimal performance.