Nexperia USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
74AHC374D,112
자세히보기 데이터시트

74AHC374D,112

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Flip-Flop
  • Characteristics: High-speed, low-power, octal D-type flip-flop with 3-state outputs
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Digital Logic IC
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • High-Level Input Voltage: 0.7 x VCC
  • Low-Level Input Voltage: 0.3 x VCC
  • High-Level Output Voltage: 0.9 x VCC
  • Low-Level Output Voltage: 0.1 x VCC
  • Maximum Operating Frequency: 125 MHz
  • Number of Flip-Flops: 8

Detailed Pin Configuration

The 74AHC374D,112 has a total of 20 pins. The pin configuration is as follows:

  1. Pin 1: Output Enable (OE)
  2. Pin 2: Data Input (D0)
  3. Pin 3: Data Input (D1)
  4. Pin 4: Data Input (D2)
  5. Pin 5: Data Input (D3)
  6. Pin 6: Data Input (D4)
  7. Pin 7: Data Input (D5)
  8. Pin 8: Data Input (D6)
  9. Pin 9: Data Input (D7)
  10. Pin 10: Clock Input (CP)
  11. Pin 11: Master Reset (MR)
  12. Pin 12: Q Output (Q0)
  13. Pin 13: Q Output (Q1)
  14. Pin 14: Q Output (Q2)
  15. Pin 15: Q Output (Q3)
  16. Pin 16: Q Output (Q4)
  17. Pin 17: Q Output (Q5)
  18. Pin 18: Q Output (Q6)
  19. Pin 19: Q Output (Q7)
  20. Pin 20: Ground (GND)

Functional Features

  • High-speed operation allows for efficient data processing.
  • Low-power consumption makes it suitable for battery-powered devices.
  • 3-state outputs provide flexibility in connecting multiple devices.
  • Octal D-type flip-flop design enables storage and transfer of data.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Flexible output options - Easy integration into digital circuits

Disadvantages: - Limited number of flip-flops (8 in this case) - Not suitable for applications requiring a large number of flip-flops

Working Principles

The 74AHC374D,112 is a positive-edge-triggered flip-flop. It stores and transfers data based on the clock input signal. When the clock input transitions from low to high, the data present at the inputs (D0-D7) is latched and transferred to the corresponding outputs (Q0-Q7). The output enable (OE) pin controls whether the outputs are active or in a high-impedance state.

Detailed Application Field Plans

The 74AHC374D,112 can be used in various applications, including:

  1. Microprocessor Systems: Used for address and data bus interfacing.
  2. Memory Modules: Enables data storage and retrieval in memory devices.
  3. Communication Systems: Facilitates data transmission and reception.
  4. Industrial Control Systems: Provides control logic for automation processes.
  5. Consumer Electronics: Used in digital TVs, set-top boxes, and gaming consoles.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74AHC374D,112 are:

  1. 74HC374: Similar octal D-type flip-flop with 3-state outputs.
  2. SN74LS374: Octal D-type flip-flop with non-inverting outputs.
  3. CD4013B: Dual D-type flip-flop with complementary outputs.

These alternative models can be considered based on specific requirements and availability.

Word count: 420 words

기술 솔루션에 74AHC374D,112 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of 74AHC374D,112 in technical solutions:

  1. Q: What is the function of the 74AHC374D,112? A: The 74AHC374D,112 is an octal D-type flip-flop with 3-state outputs. It can store and transfer data in digital circuits.

  2. Q: What is the operating voltage range for the 74AHC374D,112? A: The operating voltage range for the 74AHC374D,112 is typically between 2V and 5.5V.

  3. Q: How many flip-flops are there in the 74AHC374D,112? A: The 74AHC374D,112 contains 8 flip-flops, making it an octal flip-flop.

  4. Q: What is the maximum clock frequency supported by the 74AHC374D,112? A: The 74AHC374D,112 can support clock frequencies up to 125 MHz.

  5. Q: Can the outputs of the 74AHC374D,112 be disabled? A: Yes, the 74AHC374D,112 has 3-state outputs that can be disabled using the output enable (OE) pin.

  6. Q: What is the typical propagation delay of the 74AHC374D,112? A: The typical propagation delay of the 74AHC374D,112 is around 7 ns.

  7. Q: Is the 74AHC374D,112 compatible with TTL logic levels? A: Yes, the 74AHC374D,112 is compatible with both CMOS and TTL logic levels.

  8. Q: Can the 74AHC374D,112 be used in high-speed applications? A: Yes, the 74AHC374D,112 is designed for high-speed operation and can be used in various high-speed applications.

  9. Q: What is the power supply current requirement for the 74AHC374D,112? A: The power supply current requirement for the 74AHC374D,112 is typically around 4 mA.

  10. Q: Are there any specific precautions to consider when using the 74AHC374D,112? A: It is important to ensure proper decoupling capacitors are used near the power supply pins of the 74AHC374D,112 to minimize noise and voltage fluctuations.

Please note that these answers are general and may vary depending on the specific datasheet and manufacturer's recommendations for the 74AHC374D,112.