74HCT244DB,118

Product Overview

Category

The 74HCT244DB,118 belongs to the category of integrated circuits (ICs). Specifically, it falls under the category of digital logic ICs.

Use

This product is commonly used in electronic circuits for signal amplification and buffering. It serves as a bidirectional octal buffer/line driver with 3-state outputs.

Characteristics

• High-speed operation: The 74HCT244DB,118 offers fast switching speeds, making it suitable for applications requiring quick response times.
• Wide voltage range: It operates within a wide voltage range, typically between 2V and 6V, allowing compatibility with various systems.
• 3-state outputs: The 74HCT244DB,118 features 3-state outputs, enabling multiple devices to share a common bus without interference.
• Low power consumption: This IC consumes low power, making it energy-efficient and suitable for battery-powered devices.

Package

The 74HCT244DB,118 is available in a standard SOIC (Small Outline Integrated Circuit) package. This package provides ease of handling and compatibility with automated assembly processes.

Essence

The essence of the 74HCT244DB,118 lies in its ability to amplify and buffer digital signals, ensuring reliable transmission and reception of data in electronic circuits.

Packaging/Quantity

The 74HCT244DB,118 is typically packaged in reels or tubes, containing a specific quantity of ICs per package. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Supply Voltage Range: 2V to 6V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +125°C
• Maximum Operating Frequency: 80 MHz
• Number of Channels: 8

Detailed Pin Configuration

The 74HCT244DB,118 has a total of 20 pins. The pin configuration is as follows:

1. GND (Ground)
2. A1 (Input/Output)
3. B1 (Input/Output)
4. A2 (Input/Output)
5. B2 (Input/Output)
6. A3 (Input/Output)
7. B3 (Input/Output)
8. A4 (Input/Output)
9. B4 (Input/Output)
10. OE (Output Enable)
11. GND (Ground)
12. B5 (Input/Output)
13. A5 (Input/Output)
14. B6 (Input/Output)
15. A6 (Input/Output)
16. B7 (Input/Output)
17. A7 (Input/Output)
18. B8 (Input/Output)
19. A8 (Input/Output)
20. VCC (Supply Voltage)

Functional Features

The 74HCT244DB,118 offers the following functional features:

• Bidirectional Buffering: It allows bidirectional data flow, enabling seamless communication between different parts of a circuit.
• 3-State Outputs: The 74HCT244DB,118 supports 3-state outputs, which can be enabled or disabled using the OE (Output Enable) pin. This feature facilitates bus sharing and prevents conflicts in multi-device systems.
• High-Speed Operation: With its fast switching speeds, this IC ensures efficient signal transmission and reception in time-critical applications.

Advantages and Disadvantages

Advantages

• Fast switching speeds enable quick response times.
• Wide voltage range allows compatibility with various systems.
• Low power consumption makes it suitable for battery-powered devices.
• 3-state outputs facilitate bus sharing in multi-device systems.

Disadvantages

• Limited number of channels (8) may not be sufficient for certain applications requiring a higher channel count.
• The operating temperature range (-40°C to +125°C) may not be suitable for extreme environments.

Working Principles

The 74HCT244DB,118 operates based on the principles of digital logic. It amplifies and buffers digital signals by controlling the flow of current through its internal circuitry. The input signals are processed and amplified, ensuring reliable transmission to the output pins. The 3-state outputs allow the IC to be effectively connected to other devices without causing interference or conflicts.

Detailed Application Field Plans

The 74HCT244DB,118 finds application in various electronic systems, including but not limited to:

1. Microcontrollers: It can be used to interface microcontrollers with external devices, providing signal buffering and amplification.
2. Communication Systems: This IC facilitates data transmission and reception in communication systems, ensuring reliable signal integrity.
3. Industrial Automation: It is employed in industrial automation systems for signal conditioning and interfacing between different components.
4. Automotive Electronics: The 74HCT244DB,118