Nexperia USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
74HCT573DB,118
자세히보기 데이터시트

74HCT573DB,118

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Octal D-type transparent latch with 3-state outputs
  • Characteristics: High-speed CMOS technology, low power consumption, wide operating voltage range
  • Package: SSOP-20
  • Essence: The 74HCT573DB,118 is a latch IC that can store and output data in an octal format. It is commonly used in digital systems for temporary storage and data transfer.
  • Packaging/Quantity: Available in reels of 2,500 units

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +125°C
  • Output Drive Capability: 15mA at 5V
  • Propagation Delay: 13ns (typical)

Detailed Pin Configuration

The 74HCT573DB,118 has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. D0 (Data Input 0)
  3. D1 (Data Input 1)
  4. D2 (Data Input 2)
  5. D3 (Data Input 3)
  6. D4 (Data Input 4)
  7. D5 (Data Input 5)
  8. D6 (Data Input 6)
  9. D7 (Data Input 7)
  10. OE (Output Enable)
  11. LE (Latch Enable)
  12. Q0 (Output 0)
  13. Q1 (Output 1)
  14. Q2 (Output 2)
  15. Q3 (Output 3)
  16. Q4 (Output 4)
  17. Q5 (Output 5)
  18. Q6 (Output 6)
  19. Q7 (Output 7)
  20. VCC (Supply Voltage)

Functional Features

  • Octal D-type transparent latch with 3-state outputs
  • Data inputs are latched to the outputs when the latch enable (LE) signal is high
  • Outputs can be disabled by setting the output enable (OE) signal low
  • High-speed operation and low power consumption due to CMOS technology

Advantages and Disadvantages

Advantages: - High-speed operation allows for efficient data transfer - Low power consumption helps in reducing overall system energy requirements - Wide operating voltage range provides flexibility in different applications - 3-state outputs allow for bus sharing and easy interfacing with other devices

Disadvantages: - Limited output drive capability may restrict its use in certain high-current applications - Propagation delay of 13ns may not be suitable for ultra-high-speed systems

Working Principles

The 74HCT573DB,118 operates as an octal D-type transparent latch. When the latch enable (LE) signal is high, the data inputs (D0-D7) are latched to the outputs (Q0-Q7). The latch holds the data until a new set of inputs is provided. The output enable (OE) signal can be used to disable the outputs, allowing for bus sharing or tri-state operation.

Detailed Application Field Plans

The 74HCT573DB,118 is commonly used in various digital systems where temporary storage and data transfer are required. Some application fields include:

  1. Microprocessor-based systems
  2. Data communication systems
  3. Industrial control systems
  4. Test and measurement equipment
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the 74HCT573DB,118 are:

  1. SN74HC573N
  2. CD74HCT573E
  3. MC74HCT573AN
  4. 74LS573

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, the 74HCT573DB,118 is a versatile octal latch IC that finds applications in various digital systems. Its high-speed operation, low power consumption, and wide operating voltage range make it suitable for a wide range of applications. However, its limited output drive capability and propagation delay should be considered when selecting this IC for specific use cases.

기술 솔루션에 74HCT573DB,118 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of 74HCT573DB,118 in technical solutions:

  1. Q: What is the function of the 74HCT573DB,118? A: The 74HCT573DB,118 is an octal transparent latch with 3-state outputs. It can be used to store and control the flow of data in digital circuits.

  2. Q: What is the operating voltage range for the 74HCT573DB,118? A: The 74HCT573DB,118 operates within a voltage range of 4.5V to 5.5V.

  3. Q: How many latch outputs does the 74HCT573DB,118 have? A: The 74HCT573DB,118 has 8 latch outputs, making it suitable for applications requiring multiple data storage.

  4. Q: Can the 74HCT573DB,118 handle high-speed data transfers? A: Yes, the 74HCT573DB,118 is designed to handle high-speed data transfers with a maximum propagation delay of 11 ns.

  5. Q: Does the 74HCT573DB,118 support 3-state outputs? A: Yes, the 74HCT573DB,118 supports 3-state outputs, allowing multiple devices to share a common bus.

  6. Q: What is the power consumption of the 74HCT573DB,118? A: The power consumption of the 74HCT573DB,118 is relatively low, making it suitable for battery-powered applications.

  7. Q: Can the 74HCT573DB,118 be cascaded to increase the number of latch outputs? A: Yes, multiple 74HCT573DB,118 devices can be cascaded together to increase the number of latch outputs as needed.

  8. Q: What is the maximum operating frequency of the 74HCT573DB,118? A: The 74HCT573DB,118 has a maximum operating frequency of 80 MHz, allowing for efficient data transfer in high-speed applications.

  9. Q: Does the 74HCT573DB,118 have any built-in protection features? A: Yes, the 74HCT573DB,118 has built-in ESD protection on all inputs and outputs, ensuring reliability in harsh environments.

  10. Q: Can the 74HCT573DB,118 be used in both parallel and serial data transfer applications? A: Yes, the 74HCT573DB,118 can be used in both parallel and serial data transfer applications, providing flexibility in design choices.

Please note that these answers are general and may vary depending on specific application requirements.