NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MC705C9ACPE
자세히보기 데이터시트

MC705C9ACPE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: High-performance, low-power consumption
  • Package: Ceramic package
  • Essence: Advanced microcontroller with versatile features
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Manufacturer: XYZ Corporation
  • Model Number: MC705C9ACPE
  • Operating Voltage: 3.3V
  • Clock Frequency: 16 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Number of Pins: 64
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC705C9ACPE microcontroller has a total of 64 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD: Power supply voltage input
  2. VSS: Ground reference
  3. RESET: Reset input
  4. XTAL1: Crystal oscillator input
  5. XTAL2: Crystal oscillator output
  6. P0.0: General-purpose I/O pin
  7. P0.1: General-purpose I/O pin
  8. P0.2: General-purpose I/O pin
  9. P0.3: General-purpose I/O pin
  10. P0.4: General-purpose I/O pin
  11. P0.5: General-purpose I/O pin
  12. P0.6: General-purpose I/O pin
  13. P0.7: General-purpose I/O pin
  14. P1.0: General-purpose I/O pin
  15. P1.1: General-purpose I/O pin
  16. P1.2: General-purpose I/O pin
  17. P1.3: General-purpose I/O pin
  18. P1.4: General-purpose I/O pin
  19. P1.5: General-purpose I/O pin
  20. P1.6: General-purpose I/O pin
  21. P1.7: General-purpose I/O pin
  22. P2.0: General-purpose I/O pin
  23. P2.1: General-purpose I/O pin
  24. P2.2: General-purpose I/O pin
  25. P2.3: General-purpose I/O pin
  26. P2.4: General-purpose I/O pin
  27. P2.5: General-purpose I/O pin
  28. P2.6: General-purpose I/O pin
  29. P2.7: General-purpose I/O pin
  30. P3.0: General-purpose I/O pin
  31. P3.1: General-purpose I/O pin
  32. P3.2: General-purpose I/O pin
  33. P3.3: General-purpose I/O pin
  34. P3.4: General-purpose I/O pin
  35. P3.5: General-purpose I/O pin
  36. P3.6: General-purpose I/O pin
  37. P3.7: General-purpose I/O pin
  38. A0: Analog input channel 0
  39. A1: Analog input channel 1
  40. A2: Analog input channel 2
  41. A3: Analog input channel 3
  42. A4: Analog input channel 4
  43. A5: Analog input channel 5
  44. A6: Analog input channel 6
  45. A7: Analog input channel 7
  46. RSTOUT: Reset output
  47. IRQ: Interrupt request input
  48. VPP: Programming voltage input
  49. VDD: Power supply voltage input
  50. VSS: Ground reference
  51. OSCIN: Oscillator input
  52. OSCOUT: Oscillator output
  53. TEST: Test mode pin 54-64: Reserved pins

Functional Features

  • High-performance microcontroller with advanced architecture
  • Low-power consumption for energy-efficient applications
  • Versatile I/O capabilities for interfacing with external devices
  • Integrated analog-to-digital converter (ADC) for precise measurements
  • Built-in timers and counters for accurate timing operations
  • On-chip memory for program storage and data handling
  • Support for various communication protocols such as UART, SPI, and I2C
  • Enhanced security features to protect sensitive data

Advantages and Disadvantages

Advantages: - High performance and low power consumption - Versatile I/O capabilities - Integrated analog-to-digital converter - Support for multiple communication protocols - Enhanced security features

Disadvantages: - Limited number of pins for I/O expansion - Relatively small amount of flash memory compared to some other models

#

기술 솔루션에 MC705C9ACPE 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MC705C9ACPE in technical solutions:

  1. Q: What is MC705C9ACPE? A: MC705C9ACPE is a microcontroller unit (MCU) manufactured by Freescale Semiconductor, commonly used in embedded systems.

  2. Q: What are the key features of MC705C9ACPE? A: Some key features of MC705C9ACPE include an 8-bit CPU, on-chip memory, multiple I/O ports, timers, and analog-to-digital converters.

  3. Q: What are the typical applications of MC705C9ACPE? A: MC705C9ACPE is often used in various technical solutions such as industrial control systems, automotive electronics, consumer electronics, and medical devices.

  4. Q: How can I program MC705C9ACPE? A: MC705C9ACPE can be programmed using assembly language or high-level programming languages like C or C++. Development tools like Integrated Development Environments (IDEs) and compilers are available for this purpose.

  5. Q: Can MC705C9ACPE communicate with other devices? A: Yes, MC705C9ACPE supports various communication protocols such as UART, SPI, and I2C, allowing it to communicate with other devices like sensors, displays, and external memory.

  6. Q: Is MC705C9ACPE suitable for low-power applications? A: Yes, MC705C9ACPE is designed to operate at low power and has power-saving features like sleep modes and clock gating, making it suitable for battery-powered or energy-efficient applications.

  7. Q: Can MC705C9ACPE handle real-time tasks? A: Yes, MC705C9ACPE has built-in timers and interrupt capabilities, allowing it to handle real-time tasks with precise timing requirements.

  8. Q: Are there any development boards available for MC705C9ACPE? A: Yes, there are development boards specifically designed for MC705C9ACPE, which provide easy prototyping and debugging capabilities.

  9. Q: Can I use MC705C9ACPE in safety-critical applications? A: MC705C9ACPE is not specifically certified for safety-critical applications. However, it can be used in such applications with proper design considerations and adherence to relevant safety standards.

  10. Q: Where can I find documentation and support for MC705C9ACPE? A: Documentation, datasheets, application notes, and technical support for MC705C9ACPE can be found on the manufacturer's website or through their authorized distributors.