NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MC9S08QE64CLC
자세히보기 데이터시트

MC9S08QE64CLC

Introduction

The MC9S08QE64CLC is a microcontroller belonging to the MC9S08QE family, which is designed for embedded control applications. This entry provides an overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Microcontroller
  • Use: Embedded control applications
  • Characteristics: Low power consumption, high performance, integrated peripherals
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: 8-bit microcontroller with enhanced features
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 40 MHz
  • Flash Memory: 64 KB
  • RAM: 4 KB
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 56
  • Communication Interfaces: UART, SPI, I2C
  • Timers: 16-bit timers
  • Analog-to-Digital Converter (ADC): 10-bit resolution

Detailed Pin Configuration

The MC9S08QE64CLC features a total of 56 pins, including general-purpose I/O pins, communication interface pins, power supply pins, and other specific function pins. The detailed pin configuration can be found in the official datasheet provided by the manufacturer.

Functional Features

  • Integrated Peripherals: The microcontroller integrates various peripherals such as timers, ADC, communication interfaces, and GPIO, reducing the need for external components.
  • Low Power Consumption: It is designed to operate efficiently at low power, making it suitable for battery-powered applications.
  • Enhanced Connectivity: The communication interfaces enable seamless connectivity with other devices or systems.

Advantages and Disadvantages

Advantages

  • High-performance 8-bit CPU
  • Rich set of integrated peripherals
  • Low power consumption
  • Wide operating voltage range

Disadvantages

  • Limited processing power compared to 16 or 32-bit microcontrollers
  • Limited memory capacity for larger applications

Working Principles

The MC9S08QE64CLC operates based on the Von Neumann architecture, where program instructions and data share the same memory space. It executes instructions fetched from the Flash memory and interacts with external components through its integrated peripherals.

Detailed Application Field Plans

The MC9S08QE64CLC is well-suited for a wide range of embedded control applications, including but not limited to: - Industrial automation - Consumer electronics - Automotive systems - Home appliances - Medical devices

Detailed and Complete Alternative Models

  • MC9S08AC128: A higher-end alternative with 128 KB of Flash memory
  • MC9S08AW60: An alternative with integrated USB connectivity
  • MC9S08LL16: A lower-cost alternative with reduced memory and peripherals

In conclusion, the MC9S08QE64CLC is a versatile 8-bit microcontroller with enhanced features, making it suitable for various embedded control applications. Its low power consumption, integrated peripherals, and wide operating voltage range contribute to its appeal in diverse industries.

Word count: 443

기술 솔루션에 MC9S08QE64CLC 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

  1. What is the maximum clock frequency of MC9S08QE64CLC?

    • The maximum clock frequency of MC9S08QE64CLC is 40 MHz.

  2. What are the key features of MC9S08QE64CLC?

    • Some key features include a 8-bit S08 core, up to 60 GPIO pins, multiple communication interfaces (SPI, I2C, UART), and analog peripherals.

  3. Can MC9S08QE64CLC be used for motor control applications?

    • Yes, MC9S08QE64CLC can be used for motor control applications with its PWM outputs and timer modules.

  4. What development tools are available for MC9S08QE64CLC?

    • Development tools such as CodeWarrior IDE, PEmicro hardware debuggers, and various third-party tools are available for MC9S08QE64CLC.

  5. Is MC9S08QE64CLC suitable for battery-powered applications?

    • Yes, MC9S08QE64CLC is suitable for battery-powered applications due to its low power consumption and power-saving modes.

  6. Does MC9S08QE64CLC support real-time clock (RTC) functionality?

    • Yes, MC9S08QE64CLC supports real-time clock (RTC) functionality for timekeeping and scheduling applications.

  7. What communication interfaces does MC9S08QE64CLC support?

    • MC9S08QE64CLC supports SPI, I2C, and UART communication interfaces for connecting to other devices and peripherals.

  8. Can MC9S08QE64CLC be used in automotive applications?

    • Yes, MC9S08QE64CLC is suitable for automotive applications with its robust design, temperature range, and ESD protection.

  9. What are the available memory options for MC9S08QE64CLC?

    • MC9S08QE64CLC offers flash memory options ranging from 8 KB to 64 KB, along with SRAM and EEPROM.

  10. Are there any application notes or reference designs available for MC9S08QE64CLC?

    • Yes, NXP provides application notes, reference designs, and example code to help developers implement MC9S08QE64CLC in various technical solutions.