NXP USA Inc.
이미지는 예시일 수 있습니다.
제품 세부사항은 사양을 확인하세요.
MPC9230FN
자세히보기 데이터시트

MPC9230FN

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency
    • Low power consumption
    • Compact size
  • Package: FN package
  • Essence: Power management IC for various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 50µA

Pin Configuration

The MPC9230FN has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PGND: Power ground pin
  7. SW: Switching pin
  8. COMP: Compensation pin
  9. SS: Soft-start pin
  10. NC: No connection
  11. NC: No connection
  12. NC: No connection
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low quiescent current enables energy-saving operation
  • Built-in protection features such as overcurrent and thermal shutdown
  • Soft-start function prevents excessive inrush current during startup

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power consumption - Compact size allows for space-saving designs - Wide input voltage range provides flexibility in various applications - Built-in protection features enhance reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The MPC9230FN is a power management IC that regulates the input voltage to a desired output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is stepped down and regulated using an internal control circuit, ensuring a stable output voltage. The device also incorporates protection features to safeguard against overcurrent and thermal issues.

Detailed Application Field Plans

The MPC9230FN is widely used in various applications, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT devices - Wearable technology - Industrial automation

Detailed and Complete Alternative Models

  1. MPC9235FN

    • Similar specifications and pin configuration as MPC9230FN
    • Higher maximum output current of 2A
    • Suitable for higher power applications

  2. MPC9220FN

    • Lower maximum output current of 500mA
    • Smaller package size
    • Ideal for space-constrained designs

  3. MPC9240FN

    • Higher input voltage range of 2.7V to 6.5V
    • Lower quiescent current of 30µA
    • Enhanced efficiency for energy-sensitive applications

These alternative models provide options with varying specifications to cater to different requirements.

Word count: 334 words

기술 솔루션에 MPC9230FN 적용과 관련된 10가지 일반적인 질문과 답변을 나열하세요.

Sure! Here are 10 common questions and answers related to the application of MPC9230FN in technical solutions:

  1. Q: What is MPC9230FN? A: MPC9230FN is a specific model of integrated circuit (IC) designed for power management applications.

  2. Q: What are the key features of MPC9230FN? A: The key features of MPC9230FN include multiple voltage regulators, power sequencing, fault protection, and high efficiency.

  3. Q: What are the typical applications of MPC9230FN? A: MPC9230FN is commonly used in various technical solutions such as industrial automation, automotive systems, consumer electronics, and telecommunications.

  4. Q: How many voltage regulators does MPC9230FN have? A: MPC9230FN has multiple voltage regulators, typically ranging from two to six, depending on the specific variant.

  5. Q: Can MPC9230FN handle different input voltages? A: Yes, MPC9230FN is designed to handle a wide range of input voltages, typically from 2.7V to 5.5V.

  6. Q: Does MPC9230FN support power sequencing? A: Yes, MPC9230FN provides power sequencing capabilities, allowing controlled startup and shutdown of various power domains.

  7. Q: What kind of fault protection does MPC9230FN offer? A: MPC9230FN offers various fault protection features such as overvoltage protection (OVP), undervoltage protection (UVP), and thermal shutdown.

  8. Q: Is MPC9230FN highly efficient? A: Yes, MPC9230FN is designed for high efficiency power management, helping to optimize power consumption in technical solutions.

  9. Q: Can MPC9230FN be used in battery-powered applications? A: Yes, MPC9230FN is suitable for battery-powered applications as it supports low-power modes and has a wide input voltage range.

  10. Q: Are there any evaluation boards or reference designs available for MPC9230FN? A: Yes, the manufacturer of MPC9230FN typically provides evaluation boards and reference designs to help developers get started with the IC in their technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and the application requirements.